arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports

The asus vivobook has 2 USB type A ports on the right side, enable them

Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20250119-usb_a_micro_sd-v1-1-01eb7502ae05@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 53781f9b13af3e8491dcf63c57868eaf7025d0a8..b66d03ee3ff30561e8665be6ad34919f89a79572 100644 (file)
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -192,6 +192,20 @@
                        regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
                };
 
+               vreg_l4b_1p8: ldo4 {
+                       regulator-name = "vreg_l4b_1p8";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
+               vreg_l13b_3p0: ldo13 {
+                       regulator-name = "vreg_l13b_3p0";
+                       regulator-min-microvolt = <3072000>;
+                       regulator-max-microvolt = <3072000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
                vreg_l14b_3p0: ldo14 {
                        regulator-name = "vreg_l14b_3p0";
                        regulator-min-microvolt = <3072000>;
@@ -209,6 +223,13 @@
                vdd-l3-supply = <&vreg_s1f_0p7>;
                vdd-s4-supply = <&vph_pwr>;
 
+               vreg_l3c_0p8: ldo3 {
+                       regulator-name = "vreg_l3c_0p8";
+                       regulator-min-microvolt = <912000>;
+                       regulator-max-microvolt = <912000>;
+                       regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+               };
+
                vreg_s4c_1p8: smps4 {
                        regulator-name = "vreg_s4c_1p8";
                        regulator-min-microvolt = <1856000>;
@@ -401,7 +422,35 @@
                wakeup-source;
        };
 
-       /* EC? @ 0x5b, 0x76 */
+       eusb3_repeater: redriver@47 {
+               compatible = "nxp,ptn3222";
+               reg = <0x47>;
+               #phy-cells = <0>;
+
+               vdd3v3-supply = <&vreg_l13b_3p0>;
+               vdd1v8-supply = <&vreg_l4b_1p8>;
+
+               reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+               pinctrl-0 = <&eusb3_reset_n>;
+               pinctrl-names = "default";
+       };
+
+       eusb6_repeater: redriver@4f {
+               compatible = "nxp,ptn3222";
+               reg = <0x4f>;
+               #phy-cells = <0>;
+
+               vdd3v3-supply = <&vreg_l13b_3p0>;
+               vdd1v8-supply = <&vreg_l4b_1p8>;
+
+               reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+               pinctrl-0 = <&eusb6_reset_n>;
+               pinctrl-names = "default";
+       };
+
+       /* EC @ 0x76 */
 };
 
 &i2c7 {
@@ -563,6 +612,22 @@
                bias-disable;
        };
 
+       eusb3_reset_n: eusb3-reset-n-state {
+               pins = "gpio6";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-pull-up;
+               output-low;
+       };
+
+       eusb6_reset_n: eusb6-reset-n-state {
+               pins = "gpio184";
+               function = "gpio";
+               drive-strength = <2>;
+               bias-pull-up;
+               output-low;
+       };
+
        hall_int_n_default: hall-int-n-state {
                pins = "gpio92";
                function = "gpio";
@@ -698,3 +763,39 @@
 &usb_1_ss1_qmpphy_out {
        remote-endpoint = <&pmic_glink_ss1_ss_in>;
 };
+
+&usb_mp {
+       status = "okay";
+};
+
+&usb_mp_hsphy0 {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       phys = <&eusb6_repeater>;
+
+       status = "okay";
+};
+
+&usb_mp_hsphy1 {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       phys = <&eusb3_repeater>;
+
+       status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+       vdda-phy-supply = <&vreg_l3e_1p2>;
+       vdda-pll-supply = <&vreg_l3c_0p8>;
+
+       status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+       vdda-phy-supply = <&vreg_l3e_1p2>;
+       vdda-pll-supply = <&vreg_l3c_0p8>;
+
+       status = "okay";
+};