ARM: dts: imx6qdl-hummingboard: add SD card regulator

Add the SD card regulator, which allows the SD card power to be switched
on/off.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 84e6392fee1f0ce1fe48e223c0d7277cdb660eea..1b33cd6752f484165ec36e461aafe15f0a135b8a 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -59,6 +59,19 @@
                regulator-always-on;
        };
 
+       v_sd: regulator-v-sd {
+               compatible = "regulator-fixed";
+               gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+               regulator-boot-on;
+               regulator-max-microvolt = <3300000>;
+               regulator-min-microvolt = <3300000>;
+               regulator-name = "v_sd";
+               startup-delay-us = <1000>;
+               vin-supply = <&reg_3p3v>;
+       };
+
        reg_usbh1_vbus: usb-h1-vbus {
                compatible = "regulator-fixed";
                enable-active-high;
@@ -241,6 +254,11 @@
                                MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
                        >;
                };
+               pinctrl_hummingboard_vmmc: hummingboard-vmmc {
+                       fsl,pins = <
+                               MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+                       >;
+               };
        };
 };
 
@@ -292,7 +310,7 @@
                &pinctrl_hummingboard_usdhc2_aux
                &pinctrl_hummingboard_usdhc2
        >;
-       vmmc-supply = <&reg_3p3v>;
+       vmmc-supply = <&v_sd>;
        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        status = "okay";
 };