#include <linux/module.h>
 #include <linux/init.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/property.h>
        .endianness             = 1,
 };
 
+static void adau1373_reset(void *reset_gpio)
+{
+       gpiod_set_value_cansleep(reset_gpio, 1);
+}
+
 static int adau1373_parse_fw(struct device *dev, struct adau1373 *adau1373)
 {
        int ret, drc_count;
 static int adau1373_i2c_probe(struct i2c_client *client)
 {
        struct adau1373 *adau1373;
+       struct gpio_desc *gpiod;
        int ret;
 
        adau1373 = devm_kzalloc(&client->dev, sizeof(*adau1373), GFP_KERNEL);
        if (IS_ERR(adau1373->regmap))
                return PTR_ERR(adau1373->regmap);
 
-       regmap_write(adau1373->regmap, ADAU1373_SOFT_RESET, 0x00);
+       /*
+        * If the powerdown GPIO is specified, we use it for reset. Otherwise
+        * a software reset is done.
+        */
+       gpiod = devm_gpiod_get_optional(&client->dev, "powerdown",
+                                       GPIOD_OUT_HIGH);
+       if (IS_ERR(gpiod))
+               return PTR_ERR(gpiod);
+
+       if (gpiod) {
+               gpiod_set_value_cansleep(gpiod, 0);
+               fsleep(10);
+
+               ret = devm_add_action_or_reset(&client->dev, adau1373_reset,
+                                              gpiod);
+               if (ret)
+                       return ret;
+       } else {
+               regmap_write(adau1373->regmap, ADAU1373_SOFT_RESET, 0x00);
+       }
 
        dev_set_drvdata(&client->dev, adau1373);