ARM: sun8i: a83t: Add device node and pinmux setting for RSB controller

The A83T has an RSB controller for talking to the PMIC and audio codec.
Add a device node for it. Since there is only one usable pinmux setting,
for it, add that as well.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index d9b4372dbdf349b54adb38fbcff54f0fe28212bb..61304761e8f613268cfe1b7d8d6451befdf27d9c 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/clock/sun8i-a83t-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
 
 / {
        interrupt-parent = <&gic>;
@@ -379,6 +380,28 @@
                        #gpio-cells = <3>;
                        interrupt-controller;
                        #interrupt-cells = <3>;
+
+                       r_rsb_pins: r-rsb-pins {
+                               pins = "PL0", "PL1";
+                               function = "s_rsb";
+                               drive-strength = <20>;
+                               bias-pull-up;
+                       };
+               };
+
+               r_rsb: rsb@1f03400 {
+                       compatible = "allwinner,sun8i-a83t-rsb",
+                                    "allwinner,sun8i-a23-rsb";
+                       reg = <0x01f03400 0x400>;
+                       interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&r_ccu CLK_APB0_RSB>;
+                       clock-frequency = <3000000>;
+                       resets = <&r_ccu RST_APB0_RSB>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&r_rsb_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
                };
        };
 };