ALSA: hda: avoid reset of sdo_limit

By default 'sdo_limit' is initialized with a default value of '8'
as per spec. This is overridden in cases where a different value is
required. However this is getting reset when snd_hdac_bus_init_chip()
is called again, which happens during runtime PM cycle.

Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()'
function which would be called only once.

Fixes: 67ae482a59e9 ("ALSA: hda: add member to store ratio for stripe control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/hda/hdac_bus.c b/sound/hda/hdac_bus.c
index 09ddab5f5caebebe39b4a5a8363fe7fde30a696d..9766f6af87430db6068b812c7308f2767d8ad30b 100644 (file)
--- a/sound/hda/hdac_bus.c
+++ b/sound/hda/hdac_bus.c
@@ -46,6 +46,18 @@ int snd_hdac_bus_init(struct hdac_bus *bus, struct device *dev,
        INIT_LIST_HEAD(&bus->hlink_list);
        init_waitqueue_head(&bus->rirb_wq);
        bus->irq = -1;
+
+       /*
+        * Default value of '8' is as per the HD audio specification (Rev 1.0a).
+        * Following relation is used to derive STRIPE control value.
+        *  For sample rate <= 48K:
+        *   { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
+        *  For sample rate > 48K:
+        *   { ((num_channels * bits_per_sample * rate/48000) /
+        *      number of SDOs) >= 8 }
+        */
+       bus->sdo_limit = 8;
+
        return 0;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_bus_init);

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index 011b17cc1efa2f103960ddfd8e164a0fe8473f01..b98449fd92f3b184d0d4312eef1e84f652528318 100644 (file)
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -529,17 +529,6 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset)
 
        bus->chip_init = true;
 
-       /*
-        * Default value of '8' is as per the HD audio specification (Rev 1.0a).
-        * Following relation is used to derive STRIPE control value.
-        *  For sample rate <= 48K:
-        *   { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
-        *  For sample rate > 48K:
-        *   { ((num_channels * bits_per_sample * rate/48000) /
-        *      number of SDOs) >= 8 }
-        */
-       bus->sdo_limit = 8;
-
        return true;
 }
 EXPORT_SYMBOL_GPL(snd_hdac_bus_init_chip);