arm64: dts: freescale: imx93-phyboard-segin: Add USB support

Add support for both USB controllers. Set first controller in OTG mode
(USB micro-AB connector X8) and the second one in host mode (USB type A
connector X7) by default.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index be9c0a436734451f5d373c5f518f0ca3324e6025..e4f959f665b24c65d67f307a169841c4dda59702 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -80,6 +80,19 @@
        status = "okay";
 };
 
+/* USB  */
+&usbotg1 {
+       disable-over-current;
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbotg2 {
+       disable-over-current;
+       dr_mode = "host";
+       status = "okay";
+};
+
 /* SD-Card */
 &usdhc2 {
        pinctrl-names = "default", "state_100mhz", "state_200mhz";