ARM: dts: imx6q-apalis: add can power-up delay on ixora board

Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms.

Cc: stable@vger.kernel.org
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
index 717decda0cebd5138a0febfed8e56c6a55fb67a3..3ac7a45016205a4fd19d015a5837b9b767e4454c 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts
@@ -76,6 +76,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_enable_can1_power>;
                regulator-name = "can1_supply";
+               startup-delay-us = <1000>;
        };
 
        reg_can2_supply: regulator-can2-supply {
@@ -85,6 +86,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_enable_can2_power>;
                regulator-name = "can2_supply";
+               startup-delay-us = <1000>;
        };
 };