--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Texas Instruments DP83TC811 PHY
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83TC811_PHY_ID 0x2000a253
+#define DP83811_DEVADDR 0x1f
+
+#define MII_DP83811_SGMII_CTRL 0x09
+#define MII_DP83811_INT_STAT1 0x12
+#define MII_DP83811_INT_STAT2 0x13
+#define MII_DP83811_RESET_CTRL 0x1f
+
+#define DP83811_HW_RESET BIT(15)
+#define DP83811_SW_RESET BIT(14)
+
+/* INT_STAT1 bits */
+#define DP83811_RX_ERR_HF_INT_EN BIT(0)
+#define DP83811_MS_TRAINING_INT_EN BIT(1)
+#define DP83811_ANEG_COMPLETE_INT_EN BIT(2)
+#define DP83811_ESD_EVENT_INT_EN BIT(3)
+#define DP83811_WOL_INT_EN BIT(4)
+#define DP83811_LINK_STAT_INT_EN BIT(5)
+#define DP83811_ENERGY_DET_INT_EN BIT(6)
+#define DP83811_LINK_QUAL_INT_EN BIT(7)
+
+/* INT_STAT2 bits */
+#define DP83811_JABBER_DET_INT_EN BIT(0)
+#define DP83811_POLARITY_INT_EN BIT(1)
+#define DP83811_SLEEP_MODE_INT_EN BIT(2)
+#define DP83811_OVERTEMP_INT_EN BIT(3)
+#define DP83811_OVERVOLTAGE_INT_EN BIT(6)
+#define DP83811_UNDERVOLTAGE_INT_EN BIT(7)
+
+#define MII_DP83811_RXSOP1 0x04a5
+#define MII_DP83811_RXSOP2 0x04a6
+#define MII_DP83811_RXSOP3 0x04a7
+
+/* WoL Registers */
+#define MII_DP83811_WOL_CFG 0x04a0
+#define MII_DP83811_WOL_STAT 0x04a1
+#define MII_DP83811_WOL_DA1 0x04a2
+#define MII_DP83811_WOL_DA2 0x04a3
+#define MII_DP83811_WOL_DA3 0x04a4
+
+/* WoL bits */
+#define DP83811_WOL_MAGIC_EN BIT(0)
+#define DP83811_WOL_SECURE_ON BIT(5)
+#define DP83811_WOL_EN BIT(7)
+#define DP83811_WOL_INDICATION_SEL BIT(8)
+#define DP83811_WOL_CLR_INDICATION BIT(11)
+
+/* SGMII CTRL bits */
+#define DP83811_TDR_AUTO BIT(8)
+#define DP83811_SGMII_EN BIT(12)
+#define DP83811_SGMII_AUTO_NEG_EN BIT(13)
+#define DP83811_SGMII_TX_ERR_DIS BIT(14)
+#define DP83811_SGMII_SOFT_RESET BIT(15)
+
+static int dp83811_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read(phydev, MII_DP83811_INT_STAT1);
+ if (err < 0)
+ return err;
+
+ err = phy_read(phydev, MII_DP83811_INT_STAT2);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83811_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ const u8 *mac;
+ u16 value;
+
+ if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+ mac = (const u8 *)ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return -EINVAL;
+
+ /* MAC addresses start with byte 5, but stored in mac[0].
+ * 811 PHYs store bytes 4|5, 2|3, 0|1
+ */
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA1,
+ (mac[1] << 8) | mac[0]);
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA2,
+ (mac[3] << 8) | mac[2]);
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA3,
+ (mac[5] << 8) | mac[4]);
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_WOL_CFG);
+ if (wol->wolopts & WAKE_MAGIC)
+ value |= DP83811_WOL_MAGIC_EN;
+ else
+ value &= ~DP83811_WOL_MAGIC_EN;
+
+ if (wol->wolopts & WAKE_MAGICSECURE) {
+ phy_write_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP1,
+ (wol->sopass[1] << 8) | wol->sopass[0]);
+ phy_write_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP2,
+ (wol->sopass[3] << 8) | wol->sopass[2]);
+ phy_write_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP3,
+ (wol->sopass[5] << 8) | wol->sopass[4]);
+ value |= DP83811_WOL_SECURE_ON;
+ } else {
+ value &= ~DP83811_WOL_SECURE_ON;
+ }
+
+ value |= (DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL |
+ DP83811_WOL_CLR_INDICATION);
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+ value);
+ } else {
+ value = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_WOL_CFG);
+ value &= ~DP83811_WOL_EN;
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+ value);
+ }
+
+ return 0;
+}
+
+static void dp83811_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ u16 sopass_val;
+ int value;
+
+ wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
+ wol->wolopts = 0;
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+ if (value & DP83811_WOL_MAGIC_EN)
+ wol->wolopts |= WAKE_MAGIC;
+
+ if (value & DP83811_WOL_SECURE_ON) {
+ sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP1);
+ wol->sopass[0] = (sopass_val & 0xff);
+ wol->sopass[1] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP2);
+ wol->sopass[2] = (sopass_val & 0xff);
+ wol->sopass[3] = (sopass_val >> 8);
+
+ sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
+ MII_DP83811_RXSOP3);
+ wol->sopass[4] = (sopass_val & 0xff);
+ wol->sopass[5] = (sopass_val >> 8);
+
+ wol->wolopts |= WAKE_MAGICSECURE;
+ }
+
+ /* WoL is not enabled so set wolopts to 0 */
+ if (!(value & DP83811_WOL_EN))
+ wol->wolopts = 0;
+}
+
+static int dp83811_config_intr(struct phy_device *phydev)
+{
+ int misr_status, err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ misr_status = phy_read(phydev, MII_DP83811_INT_STAT1);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83811_RX_ERR_HF_INT_EN |
+ DP83811_MS_TRAINING_INT_EN |
+ DP83811_ANEG_COMPLETE_INT_EN |
+ DP83811_ESD_EVENT_INT_EN |
+ DP83811_WOL_INT_EN |
+ DP83811_LINK_STAT_INT_EN |
+ DP83811_ENERGY_DET_INT_EN |
+ DP83811_LINK_QUAL_INT_EN);
+
+ err = phy_write(phydev, MII_DP83811_INT_STAT1, misr_status);
+ if (err < 0)
+ return err;
+
+ misr_status = phy_read(phydev, MII_DP83811_INT_STAT2);
+ if (misr_status < 0)
+ return misr_status;
+
+ misr_status |= (DP83811_JABBER_DET_INT_EN |
+ DP83811_POLARITY_INT_EN |
+ DP83811_SLEEP_MODE_INT_EN |
+ DP83811_OVERTEMP_INT_EN |
+ DP83811_OVERVOLTAGE_INT_EN |
+ DP83811_UNDERVOLTAGE_INT_EN);
+
+ err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status);
+
+ } else {
+ err = phy_write(phydev, MII_DP83811_INT_STAT1, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_DP83811_INT_STAT1, 0);
+ }
+
+ return err;
+}
+
+static int dp83811_config_aneg(struct phy_device *phydev)
+{
+ int value, err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (DP83811_SGMII_AUTO_NEG_EN | value));
+ if (err < 0)
+ return err;
+ } else {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (~DP83811_SGMII_AUTO_NEG_EN & value));
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
+static int dp83811_config_init(struct phy_device *phydev)
+{
+ int value, err;
+
+ err = genphy_config_init(phydev);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
+ if (!(value & DP83811_SGMII_EN)) {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (DP83811_SGMII_EN | value));
+ if (err < 0)
+ return err;
+ } else {
+ err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
+ (~DP83811_SGMII_EN & value));
+ if (err < 0)
+ return err;
+ }
+ }
+
+ value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN;
+
+ return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
+ value);
+}
+
+static int dp83811_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83811_suspend(struct phy_device *phydev)
+{
+ int value;
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+ if (!(value & DP83811_WOL_EN))
+ genphy_suspend(phydev);
+
+ return 0;
+}
+
+static int dp83811_resume(struct phy_device *phydev)
+{
+ int value;
+
+ genphy_resume(phydev);
+
+ value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
+
+ phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value |
+ DP83811_WOL_CLR_INDICATION);
+
+ return 0;
+}
+
+static struct phy_driver dp83811_driver[] = {
+ {
+ .phy_id = DP83TC811_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83TC811",
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = dp83811_config_init,
+ .config_aneg = dp83811_config_aneg,
+ .soft_reset = dp83811_phy_reset,
+ .get_wol = dp83811_get_wol,
+ .set_wol = dp83811_set_wol,
+ .ack_interrupt = dp83811_ack_interrupt,
+ .config_intr = dp83811_config_intr,
+ .suspend = dp83811_suspend,
+ .resume = dp83811_resume,
+ },
+};
+module_phy_driver(dp83811_driver);
+
+static struct mdio_device_id __maybe_unused dp83811_tbl[] = {
+ { DP83TC811_PHY_ID, 0xfffffff0 },
+ { },
+};
+MODULE_DEVICE_TABLE(mdio, dp83811_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83TC811 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL");
projects / users / hch / xfs.git / commitdiff