ASoC: wm8962: Allow switching between analog and digital inputs

When the DMIC_ENA bit is set the analogue inputs are disconnected from
the digital core of the chip, in favour of the digital microphones.
Currently the driver will always enable DMIC_ENA whilst the GPIOs are
configured for the DMIC function, this means the user can't currently
use both the analog inputs and the digital inputs in one system.

Add an additional DAPM mutex that allows switching between analog and
digital inputs into the digital core.

Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reported-and-tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/20220202164545.30457-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index a5584ba962dcf005214dad2bad4c95acdaf08e22..2c41d31956aa888188eb22832154371e38899381 100644 (file)
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2049,6 +2049,13 @@ static SOC_ENUM_SINGLE_DECL(hpoutl_enum,
 static const struct snd_kcontrol_new hpoutl_mux =
        SOC_DAPM_ENUM("HPOUTL Mux", hpoutl_enum);
 
+static const char * const input_mode_text[] = { "Analog", "Digital" };
+
+static SOC_ENUM_SINGLE_VIRT_DECL(input_mode_enum, input_mode_text);
+
+static const struct snd_kcontrol_new input_mode_mux =
+       SOC_DAPM_ENUM("Input Mode", input_mode_enum);
+
 static const struct snd_kcontrol_new inpgal[] = {
 SOC_DAPM_SINGLE("IN1L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 3, 1, 0),
 SOC_DAPM_SINGLE("IN2L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 2, 1, 0),
@@ -2147,6 +2154,9 @@ SND_SOC_DAPM_MIXER("MIXINR", WM8962_PWR_MGMT_1, 4, 0,
 
 SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0),
 
+SND_SOC_DAPM_MUX("Input Mode L", SND_SOC_NOPM, 0, 0, &input_mode_mux),
+SND_SOC_DAPM_MUX("Input Mode R", SND_SOC_NOPM, 0, 0, &input_mode_mux),
+
 SND_SOC_DAPM_ADC("ADCL", "Capture", WM8962_PWR_MGMT_1, 3, 0),
 SND_SOC_DAPM_ADC("ADCR", "Capture", WM8962_PWR_MGMT_1, 2, 0),
 
@@ -2226,16 +2236,19 @@ static const struct snd_soc_dapm_route wm8962_intercon[] = {
 
        { "DMIC_ENA", NULL, "DMICDAT" },
 
+       { "Input Mode L", "Analog", "MIXINL" },
+       { "Input Mode L", "Digital", "DMIC_ENA" },
+       { "Input Mode R", "Analog", "MIXINR" },
+       { "Input Mode R", "Digital", "DMIC_ENA" },
+
        { "ADCL", NULL, "SYSCLK" },
        { "ADCL", NULL, "TOCLK" },
-       { "ADCL", NULL, "MIXINL" },
-       { "ADCL", NULL, "DMIC_ENA" },
+       { "ADCL", NULL, "Input Mode L" },
        { "ADCL", NULL, "DSP2" },
 
        { "ADCR", NULL, "SYSCLK" },
        { "ADCR", NULL, "TOCLK" },
-       { "ADCR", NULL, "MIXINR" },
-       { "ADCR", NULL, "DMIC_ENA" },
+       { "ADCR", NULL, "Input Mode R" },
        { "ADCR", NULL, "DSP2" },
 
        { "STL", "Left", "ADCL" },