+++ /dev/null
-/*
- * Copyright (C) STMicroelectronics SA 2014
- * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include "sti_hdmi_tx3g0c55phy.h"
-
-#define HDMI_SRZ_PLL_CFG 0x0504
-#define HDMI_SRZ_TAP_1 0x0508
-#define HDMI_SRZ_TAP_2 0x050C
-#define HDMI_SRZ_TAP_3 0x0510
-#define HDMI_SRZ_CTRL 0x0514
-
-#define HDMI_SRZ_PLL_CFG_POWER_DOWN BIT(0)
-#define HDMI_SRZ_PLL_CFG_VCOR_SHIFT 1
-#define HDMI_SRZ_PLL_CFG_VCOR_425MHZ 0
-#define HDMI_SRZ_PLL_CFG_VCOR_850MHZ 1
-#define HDMI_SRZ_PLL_CFG_VCOR_1700MHZ 2
-#define HDMI_SRZ_PLL_CFG_VCOR_3000MHZ 3
-#define HDMI_SRZ_PLL_CFG_VCOR_MASK 3
-#define HDMI_SRZ_PLL_CFG_VCOR(x) (x << HDMI_SRZ_PLL_CFG_VCOR_SHIFT)
-#define HDMI_SRZ_PLL_CFG_NDIV_SHIFT 8
-#define HDMI_SRZ_PLL_CFG_NDIV_MASK (0x1F << HDMI_SRZ_PLL_CFG_NDIV_SHIFT)
-#define HDMI_SRZ_PLL_CFG_MODE_SHIFT 16
-#define HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ 0x1
-#define HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ 0x4
-#define HDMI_SRZ_PLL_CFG_MODE_27_MHZ 0x5
-#define HDMI_SRZ_PLL_CFG_MODE_33_75_MHZ 0x6
-#define HDMI_SRZ_PLL_CFG_MODE_40_5_MHZ 0x7
-#define HDMI_SRZ_PLL_CFG_MODE_54_MHZ 0x8
-#define HDMI_SRZ_PLL_CFG_MODE_67_5_MHZ 0x9
-#define HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ 0xA
-#define HDMI_SRZ_PLL_CFG_MODE_81_MHZ 0xB
-#define HDMI_SRZ_PLL_CFG_MODE_82_5_MHZ 0xC
-#define HDMI_SRZ_PLL_CFG_MODE_108_MHZ 0xD
-#define HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ 0xE
-#define HDMI_SRZ_PLL_CFG_MODE_165_MHZ 0xF
-#define HDMI_SRZ_PLL_CFG_MODE_MASK 0xF
-#define HDMI_SRZ_PLL_CFG_MODE(x) (x << HDMI_SRZ_PLL_CFG_MODE_SHIFT)
-
-#define HDMI_SRZ_CTRL_POWER_DOWN (1 << 0)
-#define HDMI_SRZ_CTRL_EXTERNAL_DATA_EN (1 << 1)
-
-/* sysconf registers */
-#define HDMI_REJECTION_PLL_CONFIGURATION 0x0858 /* SYSTEM_CONFIG2534 */
-#define HDMI_REJECTION_PLL_STATUS 0x0948 /* SYSTEM_CONFIG2594 */
-
-#define REJECTION_PLL_HDMI_ENABLE_SHIFT 0
-#define REJECTION_PLL_HDMI_ENABLE_MASK (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT)
-#define REJECTION_PLL_HDMI_PDIV_SHIFT 24
-#define REJECTION_PLL_HDMI_PDIV_MASK (0x7 << REJECTION_PLL_HDMI_PDIV_SHIFT)
-#define REJECTION_PLL_HDMI_NDIV_SHIFT 16
-#define REJECTION_PLL_HDMI_NDIV_MASK (0xFF << REJECTION_PLL_HDMI_NDIV_SHIFT)
-#define REJECTION_PLL_HDMI_MDIV_SHIFT 8
-#define REJECTION_PLL_HDMI_MDIV_MASK (0xFF << REJECTION_PLL_HDMI_MDIV_SHIFT)
-
-#define REJECTION_PLL_HDMI_REJ_PLL_LOCK BIT(0)
-
-#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */
-
-/**
- * pll mode structure
- *
- * A pointer to an array of these structures is passed to a TMDS (HDMI) output
- * via the control interface to provide board and SoC specific
- * configurations of the HDMI PHY. Each entry in the array specifies a hardware
- * specific configuration for a given TMDS clock frequency range. The array
- * should be terminated with an entry that has all fields set to zero.
- *
- * @min: Lower bound of TMDS clock frequency this entry applies to
- * @max: Upper bound of TMDS clock frequency this entry applies to
- * @mode: SoC specific register configuration
- */
-struct pllmode {
- u32 min;
- u32 max;
- u32 mode;
-};
-
-#define NB_PLL_MODE 7
-static struct pllmode pllmodes[NB_PLL_MODE] = {
- {13500000, 13513500, HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ},
- {25174800, 25200000, HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ},
- {27000000, 27027000, HDMI_SRZ_PLL_CFG_MODE_27_MHZ},
- {54000000, 54054000, HDMI_SRZ_PLL_CFG_MODE_54_MHZ},
- {72000000, 74250000, HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ},
- {108000000, 108108000, HDMI_SRZ_PLL_CFG_MODE_108_MHZ},
- {148351648, 297000000, HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ}
-};
-
-#define NB_HDMI_PHY_CONFIG 5
-static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = {
- {0, 40000000, {0x00101010, 0x00101010, 0x00101010, 0x02} },
- {40000000, 140000000, {0x00111111, 0x00111111, 0x00111111, 0x02} },
- {140000000, 160000000, {0x00131313, 0x00101010, 0x00101010, 0x02} },
- {160000000, 250000000, {0x00131313, 0x00111111, 0x00111111, 0x03FE} },
- {250000000, 300000000, {0x00151515, 0x00101010, 0x00101010, 0x03FE} },
-};
-
-#define PLL_CHANGE_DELAY 1 /* ms */
-
-/**
- * Disable the pll rejection
- *
- * @hdmi: pointer on the hdmi internal structure
- *
- * return true if the pll has been disabled
- */
-static bool disable_pll_rejection(struct sti_hdmi *hdmi)
-{
- u32 val;
-
- DRM_DEBUG_DRIVER("\n");
-
- val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
- val &= ~REJECTION_PLL_HDMI_ENABLE_MASK;
- writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-
- msleep(PLL_CHANGE_DELAY);
- val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
-
- return !(val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
-}
-
-/**
- * Enable the old BCH/rejection PLL is now reused to provide the CLKPXPLL
- * clock input to the new PHY PLL that generates the serializer clock
- * (TMDS*10) and the TMDS clock which is now fed back into the HDMI
- * formatter instead of the TMDS clock line from ClockGenB.
- *
- * @hdmi: pointer on the hdmi internal structure
- *
- * return true if pll has been correctly set
- */
-static bool enable_pll_rejection(struct sti_hdmi *hdmi)
-{
- unsigned int inputclock;
- u32 mdiv, ndiv, pdiv, val;
-
- DRM_DEBUG_DRIVER("\n");
-
- if (!disable_pll_rejection(hdmi))
- return false;
-
- inputclock = hdmi->mode.clock * 1000;
-
- DRM_DEBUG_DRIVER("hdmi rejection pll input clock = %dHz\n", inputclock);
-
-
- /* Power up the HDMI rejection PLL
- * Note: On this SoC (stiH416) we are forced to have the input clock
- * be equal to the HDMI pixel clock.
- *
- * The values here have been suggested by validation however they are
- * still provisional and subject to change.
- *
- * PLLout = (Fin*Mdiv) / ((2 * Ndiv) / 2^Pdiv)
- */
- if (inputclock < 50000000) {
- /*
- * For slower clocks we need to multiply more to keep the
- * internal VCO frequency within the physical specification
- * of the PLL.
- */
- pdiv = 4;
- ndiv = 240;
- mdiv = 30;
- } else {
- pdiv = 2;
- ndiv = 60;
- mdiv = 30;
- }
-
- val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-
- val &= ~(REJECTION_PLL_HDMI_PDIV_MASK |
- REJECTION_PLL_HDMI_NDIV_MASK |
- REJECTION_PLL_HDMI_MDIV_MASK |
- REJECTION_PLL_HDMI_ENABLE_MASK);
-
- val |= (pdiv << REJECTION_PLL_HDMI_PDIV_SHIFT) |
- (ndiv << REJECTION_PLL_HDMI_NDIV_SHIFT) |
- (mdiv << REJECTION_PLL_HDMI_MDIV_SHIFT) |
- (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT);
-
- writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
-
- msleep(PLL_CHANGE_DELAY);
- val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
-
- return (val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
-}
-
-/**
- * Start hdmi phy macro cell tx3g0c55
- *
- * @hdmi: pointer on the hdmi internal structure
- *
- * Return false if an error occur
- */
-static bool sti_hdmi_tx3g0c55phy_start(struct sti_hdmi *hdmi)
-{
- u32 ckpxpll = hdmi->mode.clock * 1000;
- u32 val, tmdsck, freqvco, pllctrl = 0;
- unsigned int i;
-
- if (!enable_pll_rejection(hdmi))
- return false;
-
- DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll);
-
- /* Assuming no pixel repetition and 24bits color */
- tmdsck = ckpxpll;
- pllctrl = 2 << HDMI_SRZ_PLL_CFG_NDIV_SHIFT;
-
- /*
- * Setup the PLL mode parameter based on the ckpxpll. If we haven't got
- * a clock frequency supported by one of the specific PLL modes then we
- * will end up using the generic mode (0) which only supports a 10x
- * multiplier, hence only 24bit color.
- */
- for (i = 0; i < NB_PLL_MODE; i++) {
- if (ckpxpll >= pllmodes[i].min && ckpxpll <= pllmodes[i].max)
- pllctrl |= HDMI_SRZ_PLL_CFG_MODE(pllmodes[i].mode);
- }
-
- freqvco = tmdsck * 10;
- if (freqvco <= 425000000UL)
- pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_425MHZ);
- else if (freqvco <= 850000000UL)
- pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_850MHZ);
- else if (freqvco <= 1700000000UL)
- pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_1700MHZ);
- else if (freqvco <= 2970000000UL)
- pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_3000MHZ);
- else {
- DRM_ERROR("PHY serializer clock out of range\n");
- goto err;
- }
-
- /*
- * Configure and power up the PHY PLL
- */
- hdmi->event_received = false;
- DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl);
- hdmi_write(hdmi, pllctrl, HDMI_SRZ_PLL_CFG);
-
- /* wait PLL interrupt */
- wait_event_interruptible_timeout(hdmi->wait_event,
- hdmi->event_received == true,
- msecs_to_jiffies
- (HDMI_TIMEOUT_PLL_LOCK));
-
- if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) {
- DRM_ERROR("hdmi phy pll not locked\n");
- goto err;
- }
-
- DRM_DEBUG_DRIVER("got PHY PLL Lock\n");
-
- /*
- * To configure the source termination and pre-emphasis appropriately
- * for different high speed TMDS clock frequencies a phy configuration
- * table must be provided, tailored to the SoC and board combination.
- */
- for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) {
- if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) &&
- (hdmiphy_config[i].max_tmds_freq >= tmdsck)) {
- val = hdmiphy_config[i].config[0];
- hdmi_write(hdmi, val, HDMI_SRZ_TAP_1);
- val = hdmiphy_config[i].config[1];
- hdmi_write(hdmi, val, HDMI_SRZ_TAP_2);
- val = hdmiphy_config[i].config[2];
- hdmi_write(hdmi, val, HDMI_SRZ_TAP_3);
- val = hdmiphy_config[i].config[3];
- val |= HDMI_SRZ_CTRL_EXTERNAL_DATA_EN;
- val &= ~HDMI_SRZ_CTRL_POWER_DOWN;
- hdmi_write(hdmi, val, HDMI_SRZ_CTRL);
-
- DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x 0x%x\n",
- hdmiphy_config[i].config[0],
- hdmiphy_config[i].config[1],
- hdmiphy_config[i].config[2],
- hdmiphy_config[i].config[3]);
- return true;
- }
- }
-
- /*
- * Default, power up the serializer with no pre-emphasis or source
- * termination.
- */
- hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_1);
- hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_2);
- hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_3);
- hdmi_write(hdmi, HDMI_SRZ_CTRL_EXTERNAL_DATA_EN, HDMI_SRZ_CTRL);
-
- return true;
-
-err:
- disable_pll_rejection(hdmi);
-
- return false;
-}
-
-/**
- * Stop hdmi phy macro cell tx3g0c55
- *
- * @hdmi: pointer on the hdmi internal structure
- */
-static void sti_hdmi_tx3g0c55phy_stop(struct sti_hdmi *hdmi)
-{
- DRM_DEBUG_DRIVER("\n");
-
- hdmi->event_received = false;
-
- hdmi_write(hdmi, HDMI_SRZ_CTRL_POWER_DOWN, HDMI_SRZ_CTRL);
- hdmi_write(hdmi, HDMI_SRZ_PLL_CFG_POWER_DOWN, HDMI_SRZ_PLL_CFG);
-
- /* wait PLL interrupt */
- wait_event_interruptible_timeout(hdmi->wait_event,
- hdmi->event_received == true,
- msecs_to_jiffies
- (HDMI_TIMEOUT_PLL_LOCK));
-
- if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK)
- DRM_ERROR("hdmi phy pll not well disabled\n");
-
- disable_pll_rejection(hdmi);
-}
-
-struct hdmi_phy_ops tx3g0c55phy_ops = {
- .start = sti_hdmi_tx3g0c55phy_start,
- .stop = sti_hdmi_tx3g0c55phy_stop,
-};
* @tvout: tvout structure
* @reg: register to set
* @main_path: main or auxiliary path
- * @sel_input_logic_inverted: need to invert the logic
* @sel_input: selected_input (main/aux + conv)
*/
static void tvout_vip_set_sel_input(struct sti_tvout *tvout,
int reg,
bool main_path,
- bool sel_input_logic_inverted,
enum sti_tvout_video_out_type video_out)
{
u32 sel_input;
}
/* on stih407 chip the sel_input bypass mode logic is inverted */
- if (sel_input_logic_inverted)
- sel_input = sel_input ^ TVO_VIP_SEL_INPUT_BYPASS_MASK;
+ sel_input = sel_input ^ TVO_VIP_SEL_INPUT_BYPASS_MASK;
val &= ~TVO_VIP_SEL_INPUT_MASK;
val |= sel_input;
*/
static void tvout_dvo_start(struct sti_tvout *tvout, bool main_path)
{
- struct device_node *node = tvout->dev->of_node;
- bool sel_input_logic_inverted = false;
u32 tvo_in_vid_format;
int val, tmp;
/* Set round mode (rounded to 8-bit per component) */
tvout_vip_set_rnd(tvout, TVO_VIP_DVO, TVO_VIP_RND_8BIT_ROUNDED);
- if (of_device_is_compatible(node, "st,stih407-tvout")) {
- /* Set input video format */
- tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format,
- TVO_IN_FMT_SIGNED);
- sel_input_logic_inverted = true;
- }
+ /* Set input video format */
+ tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format, TVO_IN_FMT_SIGNED);
/* Input selection */
tvout_vip_set_sel_input(tvout, TVO_VIP_DVO, main_path,
- sel_input_logic_inverted,
STI_TVOUT_VIDEO_OUT_RGB);
}
*/
static void tvout_hdmi_start(struct sti_tvout *tvout, bool main_path)
{
- struct device_node *node = tvout->dev->of_node;
- bool sel_input_logic_inverted = false;
u32 tvo_in_vid_format;
dev_dbg(tvout->dev, "%s\n", __func__);
/* set round mode (rounded to 8-bit per component) */
tvout_vip_set_rnd(tvout, TVO_VIP_HDMI, TVO_VIP_RND_8BIT_ROUNDED);
- if (of_device_is_compatible(node, "st,stih407-tvout")) {
- /* set input video format */
- tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format,
- TVO_IN_FMT_SIGNED);
- sel_input_logic_inverted = true;
- }
+ /* set input video format */
+ tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format, TVO_IN_FMT_SIGNED);
/* input selection */
tvout_vip_set_sel_input(tvout, TVO_VIP_HDMI, main_path,
- sel_input_logic_inverted, STI_TVOUT_VIDEO_OUT_RGB);
+ STI_TVOUT_VIDEO_OUT_RGB);
}
/**
*/
static void tvout_hda_start(struct sti_tvout *tvout, bool main_path)
{
- struct device_node *node = tvout->dev->of_node;
- bool sel_input_logic_inverted = false;
u32 tvo_in_vid_format;
int val;
/* set round mode (rounded to 10-bit per component) */
tvout_vip_set_rnd(tvout, TVO_VIP_HDF, TVO_VIP_RND_10BIT_ROUNDED);
- if (of_device_is_compatible(node, "st,stih407-tvout")) {
- /* set input video format */
- tvout_vip_set_in_vid_fmt(tvout,
- tvo_in_vid_format, TVO_IN_FMT_SIGNED);
- sel_input_logic_inverted = true;
- }
+ /* Set input video format */
+ tvout_vip_set_in_vid_fmt(tvout, tvo_in_vid_format, TVO_IN_FMT_SIGNED);
/* Input selection */
tvout_vip_set_sel_input(tvout, TVO_VIP_HDF, main_path,
- sel_input_logic_inverted,
STI_TVOUT_VIDEO_OUT_YUV);
/* power up HD DAC */
}
static const struct of_device_id tvout_of_match[] = {
- { .compatible = "st,stih416-tvout", },
{ .compatible = "st,stih407-tvout", },
{ /* end node */ }
};
projects / users / hch / misc.git / commitdiff