Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 };
 
 /* Messaging Units */
-&mu_m0{
+&mu_m0 {
        status = "okay";
 };
 
-&mu1_m0{
+&mu1_m0 {
        status = "okay";
 };
 
-&mu2_m0{
+&mu2_m0 {
        status = "okay";
 };
 
 
                interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
                regulators {
-                       buck1: BUCK1{
+                       buck1: BUCK1 {
                                regulator-name = "VDD_SOC";
                                regulator-min-microvolt = <850000>;
                                regulator-max-microvolt = <950000>;
                                regulator-ramp-delay = <3125>;
                        };
 
-                       buck4: BUCK4{
+                       buck4: BUCK4 {
                                regulator-name = "VDD_3V3";
                                regulator-min-microvolt = <3300000>;
                                regulator-max-microvolt = <3300000>;
                                regulator-always-on;
                        };
 
-                       buck5: BUCK5{
+                       buck5: BUCK5 {
                                regulator-name = "VDD_1V8";
                                regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <1800000>;
 
                                nxp,dvs-standby-voltage = <850000>;
                        };
 
-                       buck4: BUCK4{
+                       buck4: BUCK4 {
                                regulator-name = "BUCK4";
                                regulator-min-microvolt = <600000>;
                                regulator-max-microvolt = <3400000>;
                                regulator-always-on;
                        };
 
-                       buck5: BUCK5{
+                       buck5: BUCK5 {
                                regulator-name = "BUCK5";
                                regulator-min-microvolt = <600000>;
                                regulator-max-microvolt = <3400000>;
 
        };
 };
 
-&pgc_gpu{
+&pgc_gpu {
        power-supply = <&sw1a_reg>;
 };
 
 
                                compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
                                reg = <0x30370000 0x10000>;
 
-                               snvs_rtc: snvs-rtc-lp{
+                               snvs_rtc: snvs-rtc-lp {
                                        compatible = "fsl,sec-v4.0-mon-rtc-lp";
                                        regmap = <&snvs>;
                                        offset = <0x34>;
 
                >;
        };
 
-       pinctrl_leds: ledsgrp{
+       pinctrl_leds: ledsgrp {
                fsl,pins = <
                        IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06                   0x00000021
                        IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07                   0x00000021