ARM: dts: stm32: add STM32MP1-based Phytec board

Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
stm32m157c-som.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 59829fc903152279cc3c670361c88d75cbb4b9a3..4c1c96000f3bf6c2c41c30658b1bb08903f4bedd 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1266,7 +1266,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
        stm32mp157c-ev1.dtb \
        stm32mp157c-ev1-scmi.dtb \
        stm32mp157c-lxa-mc1.dtb \
-       stm32mp157c-odyssey.dtb
+       stm32mp157c-odyssey.dtb \
+       stm32mp157c-phycore-stm32mp1-3.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
        sun4i-a10-a1000.dtb \
        sun4i-a10-ba10-tvbox.dtb \

diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
new file mode 100644 (file)
index 0000000..28d7203
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+
+/ {
+       model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
+       compatible = "phytec,phycore-stm32mp1-3",
+                    "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+       aliases {
+               mmc0 = &sdmmc1;
+               mmc1 = &sdmmc2;
+               mmc2 = &sdmmc3;
+               serial0 = &uart4;
+               serial1 = &usart3;
+               serial2 = &usart1;
+       };
+};
+
+&cryp1 {
+       status = "okay";
+};
+
+&dts {
+       status = "okay";
+};
+
+&fmc {
+       status = "disabled";
+};
+
+&gpu {
+       status = "okay";
+};
+
+&i2c4_eeprom {
+       status = "okay";
+};
+
+&i2c4_rtc {
+       status = "okay";
+};
+
+&qspi {
+       status = "okay";
+};
+
+&sdmmc2 {
+       status = "okay";
+};