{
        int reg;
 
-       /* depending on the 'phy_addr_sel_strap' setting, the three phys are
+       /* Calculate chip->phy_addr_base:
+        * Depending on the 'phy_addr_sel_strap' setting, the three phys are
         * using IDs 0-1-2 or IDs 1-2-3. We cannot read back the
         * 'phy_addr_sel_strap' setting directly, so we need a test, which
         * configuration is active:
        }
 
        if ((reg != 0) && (reg != 0xffff))
-               chip->phy_addr_sel_strap = 1;
+               chip->phy_addr_base = 1;
        else
-               chip->phy_addr_sel_strap = 0;
+               chip->phy_addr_base = 0;
 
        dev_dbg(chip->dev, "Phy setup '%s' detected\n",
-               chip->phy_addr_sel_strap ? "1-2-3" : "0-1-2");
+               chip->phy_addr_base ? "1-2-3" : "0-1-2");
 
        return 0;
 }
 static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
 {
        struct lan9303 *chip = ds->priv;
-       int phy_base = chip->phy_addr_sel_strap;
+       int phy_base = chip->phy_addr_base;
 
        if (phy == phy_base)
                return lan9303_virt_phy_reg_read(chip, regnum);
                             u16 val)
 {
        struct lan9303 *chip = ds->priv;
-       int phy_base = chip->phy_addr_sel_strap;
+       int phy_base = chip->phy_addr_base;
 
        if (phy == phy_base)
                return lan9303_virt_phy_reg_write(chip, regnum, val);
 
        res =  lan9303_phy_write(ds, port, MII_BMCR, ctl);
 
-       if (port == chip->phy_addr_sel_strap) {
+       if (port == chip->phy_addr_base) {
                /* Virtual Phy: Remove Turbo 200Mbit mode */
                lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl);
 
        struct lan9303 *chip = ds->priv;
 
        lan9303_disable_processing_port(chip, port);
-       lan9303_phy_write(ds, chip->phy_addr_sel_strap + port,
-                         MII_BMCR, BMCR_PDOWN);
+       lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
 }
 
 static int lan9303_port_bridge_join(struct dsa_switch *ds, int port,
 
        chip->ds->priv = chip;
        chip->ds->ops = &lan9303_switch_ops;
-       chip->ds->phys_mii_mask = chip->phy_addr_sel_strap ? 0xe : 0x7;
+       chip->ds->phys_mii_mask = chip->phy_addr_base ? 0xe : 0x7;
 
        return dsa_register_switch(chip->ds);
 }