ARM: config: multi_v5: Enable ASPEED drivers

This enables the devices used in the AST2400 family of BMC SoCs:

 - VUART
 - SPI NOR
 - LPC controller
 - LPC snoop (port 80)
 - Ethernet
 - GPIO
 - ADC
 - I2C
 - Random number generator
 - IPMI KCS
 - IPMI BT
 - Fan/Tach

Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index b647e249908e1f7278caf4d9a91df4363b99b9b8..318b76fa26d1fd54c0f8e2ea4785c576587d3b8b 100644 (file)
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -90,10 +90,14 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_ATMEL_TCLIB=y
 CONFIG_ATMEL_SSC=m
+CONFIG_ASPEED_LPC_CTRL=m
+CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -107,6 +111,7 @@ CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MACB=y
 CONFIG_DM9000=y
+CONFIG_FTGMAC100=m
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_DAVICOM_PHY=y
@@ -128,16 +133,20 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_ASPEED_VUART=m
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_ASPEED_KCS_IPMI_BMC=m
+CONFIG_ASPEED_BT_IPMI_BMC=m
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
+CONFIG_HW_RANDOM_TIMERIOMEM=m
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=y
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
@@ -146,10 +155,12 @@ CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
+CONFIG_GPIO_ASPEED=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
 CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_G762=y
 CONFIG_SENSORS_LM63=y
 CONFIG_SENSORS_LM75=y
@@ -240,6 +251,7 @@ CONFIG_MV_XOR=y
 CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_IIO=m
+CONFIG_ASPEED_ADC=m
 CONFIG_AT91_ADC=m
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=m