--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ret=0
+sin=""
+sout=""
+cin=""
+cout=""
+ksft_skip=4
+timeout=30
+capture=0
+
+TEST_COUNT=0
+
+init()
+{
+ capout=$(mktemp)
+
+ rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+
+ ns1="ns1-$rndh"
+ ns2="ns2-$rndh"
+
+ for netns in "$ns1" "$ns2";do
+ ip netns add $netns || exit $ksft_skip
+ ip -net $netns link set lo up
+ ip netns exec $netns sysctl -q net.mptcp.enabled=1
+ ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
+ ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
+ done
+
+ # ns1 ns2
+ # ns1eth1 ns2eth1
+ # ns1eth2 ns2eth2
+ # ns1eth3 ns2eth3
+ # ns1eth4 ns2eth4
+
+ for i in `seq 1 4`; do
+ ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2"
+ ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i
+ ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad
+ ip -net "$ns1" link set ns1eth$i up
+
+ ip -net "$ns2" addr add 10.0.$i.2/24 dev ns2eth$i
+ ip -net "$ns2" addr add dead:beef:$i::2/64 dev ns2eth$i nodad
+ ip -net "$ns2" link set ns2eth$i up
+
+ # let $ns2 reach any $ns1 address from any interface
+ ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i
+ done
+}
+
+cleanup_partial()
+{
+ rm -f "$capout"
+
+ for netns in "$ns1" "$ns2"; do
+ ip netns del $netns
+ done
+}
+
+cleanup()
+{
+ rm -f "$cin" "$cout"
+ rm -f "$sin" "$sout"
+ cleanup_partial
+}
+
+reset()
+{
+ cleanup_partial
+ init
+}
+
+for arg in "$@"; do
+ if [ "$arg" = "-c" ]; then
+ capture=1
+ fi
+done
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+
+check_transfer()
+{
+ in=$1
+ out=$2
+ what=$3
+
+ cmp "$in" "$out" > /dev/null 2>&1
+ if [ $? -ne 0 ] ;then
+ echo "[ FAIL ] $what does not match (in, out):"
+ print_file_err "$in"
+ print_file_err "$out"
+
+ return 1
+ fi
+
+ return 0
+}
+
+do_ping()
+{
+ listener_ns="$1"
+ connector_ns="$2"
+ connect_addr="$3"
+
+ ip netns exec ${connector_ns} ping -q -c 1 $connect_addr >/dev/null
+ if [ $? -ne 0 ] ; then
+ echo "$listener_ns -> $connect_addr connectivity [ FAIL ]" 1>&2
+ ret=1
+ fi
+}
+
+do_transfer()
+{
+ listener_ns="$1"
+ connector_ns="$2"
+ cl_proto="$3"
+ srv_proto="$4"
+ connect_addr="$5"
+
+ port=$((10000+$TEST_COUNT))
+ TEST_COUNT=$((TEST_COUNT+1))
+
+ :> "$cout"
+ :> "$sout"
+ :> "$capout"
+
+ if [ $capture -eq 1 ]; then
+ if [ -z $SUDO_USER ] ; then
+ capuser=""
+ else
+ capuser="-Z $SUDO_USER"
+ fi
+
+ capfile="mp_join-${listener_ns}.pcap"
+
+ echo "Capturing traffic for test $TEST_COUNT into $capfile"
+ ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 &
+ cappid=$!
+
+ sleep 1
+ fi
+
+ ip netns exec ${listener_ns} ./mptcp_connect -j -t $timeout -l -p $port -s ${srv_proto} 0.0.0.0 < "$sin" > "$sout" &
+ spid=$!
+
+ sleep 1
+
+ ip netns exec ${connector_ns} ./mptcp_connect -j -t $timeout -p $port -s ${cl_proto} $connect_addr < "$cin" > "$cout" &
+ cpid=$!
+
+ wait $cpid
+ retc=$?
+ wait $spid
+ rets=$?
+
+ if [ $capture -eq 1 ]; then
+ sleep 1
+ kill $cappid
+ fi
+
+ if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
+ echo " client exit code $retc, server $rets" 1>&2
+ echo "\nnetns ${listener_ns} socket stat for $port:" 1>&2
+ ip netns exec ${listener_ns} ss -nita 1>&2 -o "sport = :$port"
+ echo "\nnetns ${connector_ns} socket stat for $port:" 1>&2
+ ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port"
+
+ cat "$capout"
+ return 1
+ fi
+
+ check_transfer $sin $cout "file received by client"
+ retc=$?
+ check_transfer $cin $sout "file received by server"
+ rets=$?
+
+ if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
+ cat "$capout"
+ return 0
+ fi
+
+ cat "$capout"
+ return 1
+}
+
+make_file()
+{
+ name=$1
+ who=$2
+
+ SIZE=1
+
+ dd if=/dev/urandom of="$name" bs=1024 count=$SIZE 2> /dev/null
+ echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name"
+
+ echo "Created $name (size $SIZE KB) containing data sent by $who"
+}
+
+run_tests()
+{
+ listener_ns="$1"
+ connector_ns="$2"
+ connect_addr="$3"
+ lret=0
+
+ do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr}
+ lret=$?
+ if [ $lret -ne 0 ]; then
+ ret=$lret
+ return
+ fi
+}
+
+chk_join_nr()
+{
+ local msg="$1"
+ local syn_nr=$2
+ local syn_ack_nr=$3
+ local ack_nr=$4
+ local count
+ local dump_stats
+
+ printf "%-36s %s" "$msg" "syn"
+ count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinSynRx | awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$syn_nr" ]; then
+ echo "[fail] got $count JOIN[s] syn expected $syn_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo -n "[ ok ]"
+ fi
+
+ echo -n " - synack"
+ count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinSynAckRx | awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$syn_ack_nr" ]; then
+ echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo -n "[ ok ]"
+ fi
+
+ echo -n " - ack"
+ count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinAckRx | awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$ack_nr" ]; then
+ echo "[fail] got $count JOIN[s] ack expected $ack_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo "[ ok ]"
+ fi
+ if [ "${dump_stats}" = 1 ]; then
+ echo Server ns stats
+ ip netns exec $ns1 nstat -as | grep MPTcp
+ echo Client ns stats
+ ip netns exec $ns2 nstat -as | grep MPTcp
+ fi
+}
+
+sin=$(mktemp)
+sout=$(mktemp)
+cin=$(mktemp)
+cout=$(mktemp)
+init
+make_file "$cin" "client"
+make_file "$sin" "server"
+trap cleanup EXIT
+
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "no JOIN" "0" "0" "0"
+
+# subflow limted by client
+reset
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow, limited by client" 0 0 0
+
+# subflow limted by server
+reset
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow, limited by server" 1 1 0
+
+# subflow
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow" 1 1 1
+
+# multiple subflows
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows" 2 2 2
+
+# multiple subflows limited by serverf
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows, limited by server" 2 2 1
+
+# add_address, unused
+reset
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "unused signal address" 0 0 0
+
+# accept and use add_addr
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "signal address" 1 1 1
+
+# accept and use add_addr with an additional subflow
+# note: signal address in server ns and local addresses in client ns must
+# belong to different subnets or one of the listed local address could be
+# used for 'add_addr' subflow
+reset
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "subflow and signal" 2 2 2
+
+# accept and use add_addr with additional subflows
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows and signal" 3 3 3
+
+exit $ret
projects / users / hch / configfs.git / commitdiff