commit
7a1be318f5795cb66fa0dc86b3ace427fe68057f upstream
On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.
Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.
Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fffe0000 fffe7fff ITCM mapping area for platforms with
ITCM mounted inside the CPU.
-ffc00000 ffefffff Fixmap mapping region. Addresses provided
+ffc80000 ffefffff Fixmap mapping region. Addresses provided
by fix_to_virt() will be located here.
+ffc00000 ffc7ffff Guard region
+
+ff800000 ffbfffff Permanent, fixed read-only mapping of the
+ firmware provided DT blob
+
fee00000 feffffff Mapping of PCI I/O space. This is a static
mapping within the vmalloc space.
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-#define FIXADDR_START 0xffc00000UL
+#define FIXADDR_START 0xffc80000UL
#define FIXADDR_END 0xfff00000UL
#define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE)
*/
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
+#define FDT_FIXED_BASE UL(0xff800000)
+#define FDT_FIXED_SIZE (2 * PMD_SIZE)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Allow 16MB-aligned ioremap pages
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr))
#endif /* !CONFIG_MMU */
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
- subne r3, r0, r8
- addne r3, r3, #PAGE_OFFSET
- addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
+ ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+ addne r3, r3, r4
orrne r6, r7, r0
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
+#include <linux/libfdt.h>
#include <linux/of_fdt.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
-void *atags_vaddr __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
void __init setup_arch(char **cmdline_p)
{
const struct machine_desc *mdesc = NULL;
+ void *atags_vaddr = NULL;
if (__atags_pointer)
- atags_vaddr = phys_to_virt(__atags_pointer);
+ atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
setup_processor();
- if (atags_vaddr)
+ if (atags_vaddr) {
mdesc = setup_machine_fdt(atags_vaddr);
+ if (mdesc)
+ memblock_reserve(__atags_pointer,
+ fdt_totalsize(atags_vaddr));
+ }
if (!mdesc)
mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
if (!mdesc) {
if (mdesc->reserve)
mdesc->reserve();
- early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
/* reserve memory for DMA contiguous allocations */
#include "mm.h"
#include "tcm.h"
+extern unsigned long __atags_pointer;
+
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
return;
}
- if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ if (md->type == MT_DEVICE &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
+ if (__atags_pointer) {
+ /* create a read-only mapping of the device tree */
+ map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+ map.virtual = FDT_FIXED_BASE;
+ map.length = FDT_FIXED_SIZE;
+ map.type = MT_ROM;
+ create_mapping(&map);
+ }
+
/*
* Map the kernel if it is XIP.
* It is always first in the modulearea.
}
#ifdef CONFIG_ARM_PV_FIXUP
-extern void *atags_vaddr;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
pgtables_remap lpae_pgtables_remap_asm;
/*
unsigned long pa_pgd;
unsigned int cr, ttbcr;
long long offset;
- void *boot_data;
if (!mdesc->pv_fixup)
return;
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
- boot_data = atags_vaddr;
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
* needs to be assembly. It's fairly simple, as we're using the
* temporary tables setup by the initial assembly code.
*/
- lpae_pgtables_remap(offset, pa_pgd, boot_data);
+ lpae_pgtables_remap(offset, pa_pgd);
/* Re-enable the caches and cacheable TLB walks */
asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
/* Update level 2 entries for the boot data */
add r7, r2, #0x1000
- add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
- bic r7, r7, #(1 << L2_ORDER) - 1
+ movw r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+ add r7, r7, r3
ldrd r4, r5, [r7]
adds r4, r4, r0
adc r5, r5, r1
projects / users / dwmw2 / linux.git / commitdiff