--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * CEC driver for SECO X86 Boards
+ *
+ * Author: Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO SpA.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* CEC Framework */
+#include <media/cec.h>
+
+#include "seco-cec.h"
+
+struct secocec_data {
+ struct device *dev;
+ struct platform_device *pdev;
+ struct cec_adapter *cec_adap;
+ struct cec_notifier *notifier;
+ int irq;
+};
+
+#define smb_wr16(cmd, data) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \
+ cmd, data, SMBUS_WRITE, NULL)
+#define smb_rd16(cmd, res) smb_word_op(CMD_WORD_DATA, SECOCEC_MICRO_ADDRESS, \
+ cmd, 0, SMBUS_READ, res)
+
+static int smb_word_op(short data_format, u16 slave_addr, u8 cmd, u16 data,
+ u8 operation, u16 *result)
+{
+ unsigned int count;
+ short _data_format;
+ int status = 0;
+
+ switch (data_format) {
+ case CMD_BYTE_DATA:
+ _data_format = BRA_SMB_CMD_BYTE_DATA;
+ break;
+ case CMD_WORD_DATA:
+ _data_format = BRA_SMB_CMD_WORD_DATA;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Active wait until ready */
+ for (count = 0; count <= SMBTIMEOUT; ++count) {
+ if (!(inb(HSTS) & BRA_INUSE_STS))
+ break;
+ udelay(SMB_POLL_UDELAY);
+ }
+
+ if (count > SMBTIMEOUT)
+ /* Reset the lock instead of failing */
+ outb(0xff, HSTS);
+
+ outb(0x00, HCNT);
+ outb((u8)(slave_addr & 0xfe) | operation, XMIT_SLVA);
+ outb(cmd, HCMD);
+ inb(HCNT);
+
+ if (operation == SMBUS_WRITE) {
+ outb((u8)data, HDAT0);
+ outb((u8)(data >> 8), HDAT1);
+ }
+
+ outb(BRA_START + _data_format, HCNT);
+
+ for (count = 0; count <= SMBTIMEOUT; count++) {
+ if (!(inb(HSTS) & BRA_HOST_BUSY))
+ break;
+ udelay(SMB_POLL_UDELAY);
+ }
+
+ if (count > SMBTIMEOUT) {
+ status = -EBUSY;
+ goto err;
+ }
+
+ if (inb(HSTS) & BRA_HSTS_ERR_MASK) {
+ status = -EIO;
+ goto err;
+ }
+
+ if (operation == SMBUS_READ)
+ *result = ((inb(HDAT0) & 0xff) + ((inb(HDAT1) & 0xff) << 8));
+
+err:
+ outb(0xff, HSTS);
+ return status;
+}
+
+static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+ struct secocec_data *cec = cec_get_drvdata(adap);
+ struct device *dev = cec->dev;
+ u16 val = 0;
+ int status;
+
+ if (enable) {
+ /* Clear the status register */
+ status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+ if (status)
+ goto err;
+
+ status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+ if (status)
+ goto err;
+
+ /* Enable the interrupts */
+ status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+ if (status)
+ goto err;
+
+ status = smb_wr16(SECOCEC_ENABLE_REG_1,
+ val | SECOCEC_ENABLE_REG_1_CEC);
+ if (status)
+ goto err;
+
+ dev_dbg(dev, "Device enabled");
+ } else {
+ /* Clear the status register */
+ status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+ status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+ /* Disable the interrupts */
+ status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+ status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+ ~SECOCEC_ENABLE_REG_1_CEC &
+ ~SECOCEC_ENABLE_REG_1_IR);
+
+ dev_dbg(dev, "Device disabled");
+ }
+
+ return 0;
+err:
+ return status;
+}
+
+static int secocec_adap_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+ u16 enable_val = 0;
+ int status;
+
+ /* Disable device */
+ status = smb_rd16(SECOCEC_ENABLE_REG_1, &enable_val);
+ if (status)
+ return status;
+
+ status = smb_wr16(SECOCEC_ENABLE_REG_1,
+ enable_val & ~SECOCEC_ENABLE_REG_1_CEC);
+ if (status)
+ return status;
+
+ /* Write logical address
+ * NOTE: CEC_LOG_ADDR_INVALID is mapped to the 'Unregistered' LA
+ */
+ status = smb_wr16(SECOCEC_DEVICE_LA, logical_addr & 0xf);
+ if (status)
+ return status;
+
+ /* Re-enable device */
+ status = smb_wr16(SECOCEC_ENABLE_REG_1,
+ enable_val | SECOCEC_ENABLE_REG_1_CEC);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static int secocec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+ u32 signal_free_time, struct cec_msg *msg)
+{
+ u16 payload_len, payload_id_len, destination, val = 0;
+ u8 *payload_msg;
+ int status;
+ u8 i;
+
+ /* Device msg len already accounts for header */
+ payload_id_len = msg->len - 1;
+
+ /* Send data length */
+ status = smb_wr16(SECOCEC_WRITE_DATA_LENGTH, payload_id_len);
+ if (status)
+ goto err;
+
+ /* Send Operation ID if present */
+ if (payload_id_len > 0) {
+ status = smb_wr16(SECOCEC_WRITE_OPERATION_ID, msg->msg[1]);
+ if (status)
+ goto err;
+ }
+ /* Send data if present */
+ if (payload_id_len > 1) {
+ /* Only data; */
+ payload_len = msg->len - 2;
+ payload_msg = &msg->msg[2];
+
+ /* Copy message into registers */
+ for (i = 0; i < payload_len; i += 2) {
+ /* hi byte */
+ val = payload_msg[i + 1] << 8;
+
+ /* lo byte */
+ val |= payload_msg[i];
+
+ status = smb_wr16(SECOCEC_WRITE_DATA_00 + i / 2, val);
+ if (status)
+ goto err;
+ }
+ }
+ /* Send msg source/destination and fire msg */
+ destination = msg->msg[0];
+ status = smb_wr16(SECOCEC_WRITE_BYTE0, destination);
+ if (status)
+ goto err;
+
+ return 0;
+
+err:
+ return status;
+}
+
+static void secocec_tx_done(struct cec_adapter *adap, u16 status_val)
+{
+ if (status_val & SECOCEC_STATUS_TX_ERROR_MASK) {
+ if (status_val & SECOCEC_STATUS_TX_NACK_ERROR)
+ cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK);
+ else
+ cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR);
+ } else {
+ cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK);
+ }
+
+ /* Reset status reg */
+ status_val = SECOCEC_STATUS_TX_ERROR_MASK |
+ SECOCEC_STATUS_MSG_SENT_MASK |
+ SECOCEC_STATUS_TX_NACK_ERROR;
+ smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
+{
+ struct secocec_data *cec = cec_get_drvdata(adap);
+ struct device *dev = cec->dev;
+ struct cec_msg msg = { };
+ bool flag_overflow = false;
+ u8 payload_len, i = 0;
+ u8 *payload_msg;
+ u16 val = 0;
+ int status;
+
+ if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
+ /* NOTE: Untested, it also might not be necessary */
+ dev_warn(dev, "Received more than 16 bytes. Discarding");
+ flag_overflow = true;
+ }
+
+ if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
+ dev_warn(dev, "Message received with errors. Discarding");
+ status = -EIO;
+ goto rxerr;
+ }
+
+ /* Read message length */
+ status = smb_rd16(SECOCEC_READ_DATA_LENGTH, &val);
+ if (status)
+ return;
+
+ /* Device msg len already accounts for the header */
+ msg.len = min(val + 1, CEC_MAX_MSG_SIZE);
+
+ /* Read logical address */
+ status = smb_rd16(SECOCEC_READ_BYTE0, &val);
+ if (status)
+ return;
+
+ /* device stores source LA and destination */
+ msg.msg[0] = val;
+
+ /* Read operation ID */
+ status = smb_rd16(SECOCEC_READ_OPERATION_ID, &val);
+ if (status)
+ return;
+
+ msg.msg[1] = val;
+
+ /* Read data if present */
+ if (msg.len > 1) {
+ payload_len = msg.len - 2;
+ payload_msg = &msg.msg[2];
+
+ /* device stores 2 bytes in every 16-bit val */
+ for (i = 0; i < payload_len; i += 2) {
+ status = smb_rd16(SECOCEC_READ_DATA_00 + i / 2, &val);
+ if (status)
+ return;
+
+ /* low byte, skipping header */
+ payload_msg[i] = val & 0x00ff;
+
+ /* hi byte */
+ payload_msg[i + 1] = (val & 0xff00) >> 8;
+ }
+ }
+
+ cec_received_msg(cec->cec_adap, &msg);
+
+ /* Reset status reg */
+ status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK;
+ if (flag_overflow)
+ status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+
+ status = smb_wr16(SECOCEC_STATUS, status_val);
+
+ return;
+
+rxerr:
+ /* Reset error reg */
+ status_val = SECOCEC_STATUS_MSG_RECEIVED_MASK |
+ SECOCEC_STATUS_RX_ERROR_MASK;
+ if (flag_overflow)
+ status_val |= SECOCEC_STATUS_RX_OVERFLOW_MASK;
+ smb_wr16(SECOCEC_STATUS, status_val);
+}
+
+struct cec_adap_ops secocec_cec_adap_ops = {
+ /* Low-level callbacks */
+ .adap_enable = secocec_adap_enable,
+ .adap_log_addr = secocec_adap_log_addr,
+ .adap_transmit = secocec_adap_transmit,
+};
+
+static irqreturn_t secocec_irq_handler(int irq, void *priv)
+{
+ struct secocec_data *cec = priv;
+ struct device *dev = cec->dev;
+ u16 status_val, cec_val, val = 0;
+ int status;
+
+ /* Read status register */
+ status = smb_rd16(SECOCEC_STATUS_REG_1, &status_val);
+ if (status)
+ goto err;
+
+ if (status_val & SECOCEC_STATUS_REG_1_CEC) {
+ /* Read CEC status register */
+ status = smb_rd16(SECOCEC_STATUS, &cec_val);
+ if (status)
+ goto err;
+
+ if (cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK)
+ secocec_rx_done(cec->cec_adap, cec_val);
+
+ if (cec_val & SECOCEC_STATUS_MSG_SENT_MASK)
+ secocec_tx_done(cec->cec_adap, cec_val);
+
+ if ((~cec_val & SECOCEC_STATUS_MSG_SENT_MASK) &&
+ (~cec_val & SECOCEC_STATUS_MSG_RECEIVED_MASK))
+ dev_warn_once(dev,
+ "Message not received or sent, but interrupt fired");
+
+ val = SECOCEC_STATUS_REG_1_CEC;
+ }
+
+ if (status_val & SECOCEC_STATUS_REG_1_IR) {
+ val |= SECOCEC_STATUS_REG_1_IR;
+ /* TODO IRDA RX */
+ }
+
+ /* Reset status register */
+ status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+ if (status)
+ goto err;
+
+ return IRQ_HANDLED;
+
+err:
+ dev_err_once(dev, "IRQ: R/W SMBus operation failed (%d)", status);
+
+ /* Reset status register */
+ val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
+ smb_wr16(SECOCEC_STATUS_REG_1, val);
+
+ return IRQ_HANDLED;
+}
+
+struct cec_dmi_match {
+ char *sys_vendor;
+ char *product_name;
+ char *devname;
+ char *conn;
+};
+
+static const struct cec_dmi_match secocec_dmi_match_table[] = {
+ /* UDOO X86 */
+ { "SECO", "UDOO x86", "0000:00:02.0", "Port B" },
+};
+
+static int secocec_cec_get_notifier(struct cec_notifier **notify)
+{
+ int i;
+
+ for (i = 0 ; i < ARRAY_SIZE(secocec_dmi_match_table) ; ++i) {
+ const struct cec_dmi_match *m = &secocec_dmi_match_table[i];
+
+ if (dmi_match(DMI_SYS_VENDOR, m->sys_vendor) &&
+ dmi_match(DMI_PRODUCT_NAME, m->product_name)) {
+ struct device *d;
+
+ /* Find the device, bail out if not yet registered */
+ d = bus_find_device_by_name(&pci_bus_type, NULL,
+ m->devname);
+ if (!d)
+ return -EPROBE_DEFER;
+
+ *notify = cec_notifier_get_conn(d, m->conn);
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int secocec_acpi_probe(struct secocec_data *sdev)
+{
+ struct device *dev = sdev->dev;
+ struct gpio_desc *gpio;
+ int irq = 0;
+
+ gpio = devm_gpiod_get(dev, NULL, GPIOF_IN);
+ if (IS_ERR(gpio)) {
+ dev_err(dev, "Cannot request interrupt gpio");
+ return PTR_ERR(gpio);
+ }
+
+ irq = gpiod_to_irq(gpio);
+ if (irq < 0) {
+ dev_err(dev, "Cannot find valid irq");
+ return -ENODEV;
+ }
+ dev_dbg(dev, "irq-gpio is bound to IRQ %d", irq);
+
+ sdev->irq = irq;
+
+ return 0;
+}
+
+static int secocec_probe(struct platform_device *pdev)
+{
+ struct secocec_data *secocec;
+ struct device *dev = &pdev->dev;
+ int ret;
+ u16 val;
+
+ secocec = devm_kzalloc(dev, sizeof(*secocec), GFP_KERNEL);
+ if (!secocec)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, secocec);
+
+ /* Request SMBus regions */
+ if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
+ dev_err(dev, "Request memory region failed");
+ return -ENXIO;
+ }
+
+ secocec->pdev = pdev;
+ secocec->dev = dev;
+
+ if (!has_acpi_companion(dev)) {
+ dev_dbg(dev, "Cannot find any ACPI companion");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ret = secocec_acpi_probe(secocec);
+ if (ret) {
+ dev_err(dev, "Cannot assign gpio to IRQ");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* Firmware version check */
+ ret = smb_rd16(SECOCEC_VERSION, &val);
+ if (ret) {
+ dev_err(dev, "Cannot check fw version");
+ goto err;
+ }
+ if (val < SECOCEC_LATEST_FW) {
+ dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x",
+ val, SECOCEC_LATEST_FW);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = secocec_cec_get_notifier(&secocec->notifier);
+ if (ret) {
+ dev_err(dev, "no CEC notifier available\n");
+ goto err;
+ }
+
+ ret = devm_request_threaded_irq(dev,
+ secocec->irq,
+ NULL,
+ secocec_irq_handler,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), secocec);
+
+ if (ret) {
+ dev_err(dev, "Cannot request IRQ %d", secocec->irq);
+ ret = -EIO;
+ goto err;
+ }
+
+ /* Allocate CEC adapter */
+ secocec->cec_adap = cec_allocate_adapter(&secocec_cec_adap_ops,
+ secocec,
+ dev_name(dev),
+ CEC_CAP_DEFAULTS,
+ SECOCEC_MAX_ADDRS);
+
+ if (IS_ERR(secocec->cec_adap)) {
+ ret = PTR_ERR(secocec->cec_adap);
+ goto err;
+ }
+
+ ret = cec_register_adapter(secocec->cec_adap, dev);
+ if (ret)
+ goto err_delete_adapter;
+
+ if (secocec->notifier)
+ cec_register_cec_notifier(secocec->cec_adap, secocec->notifier);
+
+ platform_set_drvdata(pdev, secocec);
+
+ dev_dbg(dev, "Device registered");
+
+ return ret;
+
+err_delete_adapter:
+ cec_delete_adapter(secocec->cec_adap);
+err:
+ dev_err(dev, "%s device probe failed\n", dev_name(dev));
+
+ return ret;
+}
+
+static int secocec_remove(struct platform_device *pdev)
+{
+ struct secocec_data *secocec = platform_get_drvdata(pdev);
+
+ cec_unregister_adapter(secocec->cec_adap);
+
+ if (secocec->notifier)
+ cec_notifier_put(secocec->notifier);
+
+ release_region(BRA_SMB_BASE_ADDR, 7);
+
+ dev_dbg(&pdev->dev, "CEC device removed");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int secocec_suspend(struct device *dev)
+{
+ int status;
+ u16 val;
+
+ dev_dbg(dev, "Device going to suspend, disabling");
+
+ /* Clear the status register */
+ status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+ if (status)
+ goto err;
+
+ status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+ if (status)
+ goto err;
+
+ /* Disable the interrupts */
+ status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+ if (status)
+ goto err;
+
+ status = smb_wr16(SECOCEC_ENABLE_REG_1, val &
+ ~SECOCEC_ENABLE_REG_1_CEC & ~SECOCEC_ENABLE_REG_1_IR);
+ if (status)
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(dev, "Suspend failed (err: %d)", status);
+ return status;
+}
+
+static int secocec_resume(struct device *dev)
+{
+ int status;
+ u16 val;
+
+ dev_dbg(dev, "Resuming device from suspend");
+
+ /* Clear the status register */
+ status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
+ if (status)
+ goto err;
+
+ status = smb_wr16(SECOCEC_STATUS_REG_1, val);
+ if (status)
+ goto err;
+
+ /* Enable the interrupts */
+ status = smb_rd16(SECOCEC_ENABLE_REG_1, &val);
+ if (status)
+ goto err;
+
+ status = smb_wr16(SECOCEC_ENABLE_REG_1, val | SECOCEC_ENABLE_REG_1_CEC);
+ if (status)
+ goto err;
+
+ dev_dbg(dev, "Device resumed from suspend");
+
+ return 0;
+
+err:
+ dev_err(dev, "Resume failed (err: %d)", status);
+ return status;
+}
+
+static SIMPLE_DEV_PM_OPS(secocec_pm_ops, secocec_suspend, secocec_resume);
+#define SECOCEC_PM_OPS (&secocec_pm_ops)
+#else
+#define SECOCEC_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id secocec_acpi_match[] = {
+ {"CEC00001", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(acpi, secocec_acpi_match);
+#endif
+
+static struct platform_driver secocec_driver = {
+ .driver = {
+ .name = SECOCEC_DEV_NAME,
+ .acpi_match_table = ACPI_PTR(secocec_acpi_match),
+ .pm = SECOCEC_PM_OPS,
+ },
+ .probe = secocec_probe,
+ .remove = secocec_remove,
+};
+
+module_platform_driver(secocec_driver);
+
+MODULE_DESCRIPTION("SECO CEC X86 Driver");
+MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>");
+MODULE_LICENSE("Dual BSD/GPL");
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * SECO X86 Boards CEC register defines
+ *
+ * Author: Ettore Chimenti <ek5.chimenti@gmail.com>
+ * Copyright (C) 2018, SECO Spa.
+ * Copyright (C) 2018, Aidilab Srl.
+ */
+
+#ifndef __SECO_CEC_H__
+#define __SECO_CEC_H__
+
+#define SECOCEC_MAX_ADDRS 1
+#define SECOCEC_DEV_NAME "secocec"
+#define SECOCEC_LATEST_FW 0x0f0b
+
+#define SMBTIMEOUT 0xfff
+#define SMB_POLL_UDELAY 10
+
+#define SMBUS_WRITE 0
+#define SMBUS_READ 1
+
+#define CMD_BYTE_DATA 0
+#define CMD_WORD_DATA 1
+
+/*
+ * SMBus definitons for Braswell
+ */
+
+#define BRA_DONE_STATUS BIT(7)
+#define BRA_INUSE_STS BIT(6)
+#define BRA_FAILED_OP BIT(4)
+#define BRA_BUS_ERR BIT(3)
+#define BRA_DEV_ERR BIT(2)
+#define BRA_INTR BIT(1)
+#define BRA_HOST_BUSY BIT(0)
+#define BRA_HSTS_ERR_MASK (BRA_FAILED_OP | BRA_BUS_ERR | BRA_DEV_ERR)
+
+#define BRA_PEC_EN BIT(7)
+#define BRA_START BIT(6)
+#define BRA_LAST__BYTE BIT(5)
+#define BRA_INTREN BIT(0)
+#define BRA_SMB_CMD (7 << 2)
+#define BRA_SMB_CMD_QUICK (0 << 2)
+#define BRA_SMB_CMD_BYTE (1 << 2)
+#define BRA_SMB_CMD_BYTE_DATA (2 << 2)
+#define BRA_SMB_CMD_WORD_DATA (3 << 2)
+#define BRA_SMB_CMD_PROCESS_CALL (4 << 2)
+#define BRA_SMB_CMD_BLOCK (5 << 2)
+#define BRA_SMB_CMD_I2CREAD (6 << 2)
+#define BRA_SMB_CMD_BLOCK_PROCESS (7 << 2)
+
+#define BRA_SMB_BASE_ADDR 0x2040
+#define HSTS (BRA_SMB_BASE_ADDR + 0)
+#define HCNT (BRA_SMB_BASE_ADDR + 2)
+#define HCMD (BRA_SMB_BASE_ADDR + 3)
+#define XMIT_SLVA (BRA_SMB_BASE_ADDR + 4)
+#define HDAT0 (BRA_SMB_BASE_ADDR + 5)
+#define HDAT1 (BRA_SMB_BASE_ADDR + 6)
+
+/*
+ * Microcontroller Address
+ */
+
+#define SECOCEC_MICRO_ADDRESS 0x40
+
+/*
+ * STM32 SMBus Registers
+ */
+
+#define SECOCEC_VERSION 0x00
+#define SECOCEC_ENABLE_REG_1 0x01
+#define SECOCEC_ENABLE_REG_2 0x02
+#define SECOCEC_STATUS_REG_1 0x03
+#define SECOCEC_STATUS_REG_2 0x04
+
+#define SECOCEC_STATUS 0x28
+#define SECOCEC_DEVICE_LA 0x29
+#define SECOCEC_READ_OPERATION_ID 0x2a
+#define SECOCEC_READ_DATA_LENGTH 0x2b
+#define SECOCEC_READ_DATA_00 0x2c
+#define SECOCEC_READ_DATA_02 0x2d
+#define SECOCEC_READ_DATA_04 0x2e
+#define SECOCEC_READ_DATA_06 0x2f
+#define SECOCEC_READ_DATA_08 0x30
+#define SECOCEC_READ_DATA_10 0x31
+#define SECOCEC_READ_DATA_12 0x32
+#define SECOCEC_READ_BYTE0 0x33
+#define SECOCEC_WRITE_OPERATION_ID 0x34
+#define SECOCEC_WRITE_DATA_LENGTH 0x35
+#define SECOCEC_WRITE_DATA_00 0x36
+#define SECOCEC_WRITE_DATA_02 0x37
+#define SECOCEC_WRITE_DATA_04 0x38
+#define SECOCEC_WRITE_DATA_06 0x39
+#define SECOCEC_WRITE_DATA_08 0x3a
+#define SECOCEC_WRITE_DATA_10 0x3b
+#define SECOCEC_WRITE_DATA_12 0x3c
+#define SECOCEC_WRITE_BYTE0 0x3d
+
+#define SECOCEC_IR_READ_DATA 0x3e
+
+/*
+ * Enabling register
+ */
+
+#define SECOCEC_ENABLE_REG_1_CEC 0x1000
+#define SECOCEC_ENABLE_REG_1_IR 0x2000
+#define SECOCEC_ENABLE_REG_1_IR_PASSTHROUGH 0x4000
+
+/*
+ * Status register
+ */
+
+#define SECOCEC_STATUS_REG_1_CEC SECOCEC_ENABLE_REG_1_CEC
+#define SECOCEC_STATUS_REG_1_IR SECOCEC_ENABLE_REG_1_IR
+#define SECOCEC_STATUS_REG_1_IR_PASSTHR SECOCEC_ENABLE_REG_1_IR_PASSTHR
+
+/*
+ * Status data
+ */
+
+#define SECOCEC_STATUS_MSG_RECEIVED_MASK BIT(0)
+#define SECOCEC_STATUS_RX_ERROR_MASK BIT(1)
+#define SECOCEC_STATUS_MSG_SENT_MASK BIT(2)
+#define SECOCEC_STATUS_TX_ERROR_MASK BIT(3)
+
+#define SECOCEC_STATUS_TX_NACK_ERROR BIT(4)
+#define SECOCEC_STATUS_RX_OVERFLOW_MASK BIT(5)
+
+#endif /* __SECO_CEC_H__ */
projects / users / hch / block.git / commitdiff