"#pwm-cells":
     const: 3
 
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  poll-interval:
+    enum: [10, 20, 30, 40]
+    default: 10
+
+  adi,keypad-pins:
+    description: Specifies the pins used for the keypad matrix.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  adi,unlock-events:
+    description:
+      Specifies a maximum of 2 events that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys/gpis are pressed. The value 127 serves as a wildcard which
+      means any key can be used for unlocking.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      anyOf:
+        - minimum: 1
+          maximum: 88
+        - minimum: 97
+          maximum: 115
+        - const: 127
+
+  adi,unlock-trigger-sec:
+    description:
+      Defines the time in which the second unlock event must occur after the
+      first unlock event has occurred.
+    maximum: 7
+    default: 0
+
+  adi,reset1-events:
+    description:
+      Defines the trigger events (key/gpi presses) that can generate reset
+      conditions one the reset1 block.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+
+  adi,reset2-events:
+    description:
+      Defines the trigger events (key/gpi presses) that can generate reset
+      conditions one the reset2 block.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+  adi,reset1-active-high:
+    description: Sets the reset1 signal as active high.
+    type: boolean
+
+  adi,reset2-active-high:
+    description: Sets the reset2 signal as active high.
+    type: boolean
+
+  adi,rst-passthrough-enable:
+    description: Allows the RST pin to override (OR with) the reset1 signal.
+    type: boolean
+
+  adi,reset-trigger-ms:
+    description:
+      Defines the length of time that the reset events must be active before a
+      reset signal is generated. All events must be active at the same time for
+      the same duration.
+    enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000]
+    default: 0
+
+  adi,reset-pulse-width-us:
+    description: Defines the pulse width of the reset signals.
+    enum: [500, 1000, 2000, 10000]
+    default: 500
+
 patternProperties:
   "-hog(-[0-9]+)?$":
     type: object
     required:
       - gpio-hog
 
+dependencies:
+  linux,keymap:
+    - adi,keypad-pins
+    - interrupts
+  interrupt-controller:
+    - interrupts
+  adi,unlock-trigger-sec:
+    - adi,unlock-events
+  adi,reset1-active-high:
+    - adi,reset1-events
+  adi,rst-passtrough-enable:
+    - adi,reset1-events
+  adi,reset2-active-high:
+    - adi,reset2-events
+
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+  - $ref: /schemas/input/input.yaml#
   - if:
       properties:
         compatible:
             const: adi,adp5585-01
     then:
       properties:
+        adi,unlock-events: false
+        adi,unlock-trigger-sec: false
         gpio-reserved-ranges: false
-
+        adi,keypad-pins:
+          minItems: 2
+          maxItems: 11
+          items:
+            minimum: 0
+            maximum: 10
+        adi,reset1-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 30
+              - minimum: 37
+                maximum: 47
+        adi,reset2-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 30
+              - minimum: 37
+                maximum: 47
   - if:
       properties:
         compatible:
               - adi,adp5585-04
     then:
       properties:
+        adi,unlock-events: false
+        adi,unlock-trigger-sec: false
+        adi,keypad-pins:
+          minItems: 2
+          maxItems: 10
+          items:
+            enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10]
+        adi,reset1-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 25
+              - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
+        adi,reset2-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 25
+              - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
         gpio-reserved-ranges:
           maxItems: 1
           items:
     then:
       properties:
         gpio-reserved-ranges: false
+        adi,keypad-pins:
+          minItems: 2
+          maxItems: 19
+          items:
+            minimum: 0
+            maximum: 18
+        adi,reset1-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 88
+              - minimum: 97
+                maximum: 115
+        adi,reset2-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 88
+              - minimum: 97
+                maximum: 115
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
             gpio-reserved-ranges = <5 1>;
 
             #pwm-cells = <3>;
+
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,reset1-events = <1 43>;
+            adi,reset2-events = <2 3>;
+            adi,reset-trigger-ms = <2000>;
+
+            /*
+             * col0, col1, col2
+             * row0, row1, row2
+             */
+            adi,keypad-pins = <0 1 2 6 7 8>;
+
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+
+                MATRIX_KEY(0x01, 0x00, KEY_A)
+                MATRIX_KEY(0x01, 0x01, KEY_B)
+                MATRIX_KEY(0x01, 0x02, KEY_C)
+
+                MATRIX_KEY(0x02, 0x00, BTN_1)
+                MATRIX_KEY(0x02, 0x01, BTN_2)
+                MATRIX_KEY(0x02, 0x02, BTN_3)
+            >;
         };
     };