net: ngbe: move mdio access registers to libwx

Registers of mdio accessing are common defined in libwx, remove the
redundant macro definitions in ngbe driver.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
index fe20f02ecb3aab9ad2467dbfd46af95e5d99b593..591f5b7b6da6580795d6640f339f05c9d117da8a 100644 (file)
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
@@ -37,24 +37,24 @@ static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regn
 
        wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
        /* setup and write the address cycle command */
-       command = NGBE_MSCA_RA(regnum) |
-                 NGBE_MSCA_PA(phy_addr) |
-                 NGBE_MSCA_DA(device_type);
-       wr32(wx, NGBE_MSCA, command);
-       command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
-                 NGBE_MSCC_BUSY |
-                 NGBE_MDIO_CLK(6);
-       wr32(wx, NGBE_MSCC, command);
+       command = WX_MSCA_RA(regnum) |
+                 WX_MSCA_PA(phy_addr) |
+                 WX_MSCA_DA(device_type);
+       wr32(wx, WX_MSCA, command);
+       command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
+                 WX_MSCC_BUSY |
+                 WX_MDIO_CLK(6);
+       wr32(wx, WX_MSCC, command);
 
        /* wait to complete */
-       ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-                               100000, false, wx, NGBE_MSCC);
+       ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+                               100000, false, wx, WX_MSCC);
        if (ret) {
                wx_err(wx, "Mdio read c22 command did not complete.\n");
                return ret;
        }
 
-       return (u16)rd32(wx, NGBE_MSCC);
+       return (u16)rd32(wx, WX_MSCC);
 }
 
 static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
@@ -65,19 +65,19 @@ static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int reg
 
        wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
        /* setup and write the address cycle command */
-       command = NGBE_MSCA_RA(regnum) |
-                 NGBE_MSCA_PA(phy_addr) |
-                 NGBE_MSCA_DA(device_type);
-       wr32(wx, NGBE_MSCA, command);
+       command = WX_MSCA_RA(regnum) |
+                 WX_MSCA_PA(phy_addr) |
+                 WX_MSCA_DA(device_type);
+       wr32(wx, WX_MSCA, command);
        command = value |
-                 NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
-                 NGBE_MSCC_BUSY |
-                 NGBE_MDIO_CLK(6);
-       wr32(wx, NGBE_MSCC, command);
+                 WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
+                 WX_MSCC_BUSY |
+                 WX_MDIO_CLK(6);
+       wr32(wx, WX_MSCC, command);
 
        /* wait to complete */
-       ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-                               100000, false, wx, NGBE_MSCC);
+       ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+                               100000, false, wx, WX_MSCC);
        if (ret)
                wx_err(wx, "Mdio write c22 command did not complete.\n");
 
@@ -92,24 +92,24 @@ static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devn
 
        wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
        /* setup and write the address cycle command */
-       command = NGBE_MSCA_RA(regnum) |
-                 NGBE_MSCA_PA(phy_addr) |
-                 NGBE_MSCA_DA(devnum);
-       wr32(wx, NGBE_MSCA, command);
-       command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
-                 NGBE_MSCC_BUSY |
-                 NGBE_MDIO_CLK(6);
-       wr32(wx, NGBE_MSCC, command);
+       command = WX_MSCA_RA(regnum) |
+                 WX_MSCA_PA(phy_addr) |
+                 WX_MSCA_DA(devnum);
+       wr32(wx, WX_MSCA, command);
+       command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
+                 WX_MSCC_BUSY |
+                 WX_MDIO_CLK(6);
+       wr32(wx, WX_MSCC, command);
 
        /* wait to complete */
-       ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-                               100000, false, wx, NGBE_MSCC);
+       ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+                               100000, false, wx, WX_MSCC);
        if (ret) {
                wx_err(wx, "Mdio read c45 command did not complete.\n");
                return ret;
        }
 
-       return (u16)rd32(wx, NGBE_MSCC);
+       return (u16)rd32(wx, WX_MSCC);
 }
 
 static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
@@ -121,19 +121,19 @@ static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
 
        wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
        /* setup and write the address cycle command */
-       command = NGBE_MSCA_RA(regnum) |
-                 NGBE_MSCA_PA(phy_addr) |
-                 NGBE_MSCA_DA(devnum);
-       wr32(wx, NGBE_MSCA, command);
+       command = WX_MSCA_RA(regnum) |
+                 WX_MSCA_PA(phy_addr) |
+                 WX_MSCA_DA(devnum);
+       wr32(wx, WX_MSCA, command);
        command = value |
-                 NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
-                 NGBE_MSCC_BUSY |
-                 NGBE_MDIO_CLK(6);
-       wr32(wx, NGBE_MSCC, command);
+                 WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
+                 WX_MSCC_BUSY |
+                 WX_MDIO_CLK(6);
+       wr32(wx, WX_MSCC, command);
 
        /* wait to complete */
-       ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
-                               100000, false, wx, NGBE_MSCC);
+       ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+                               100000, false, wx, WX_MSCC);
        if (ret)
                wx_err(wx, "Mdio write c45 command did not complete.\n");
 

diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index b70eca397b672270820f8a2904c0c264f86a86b0..72c8cd2d557513e24c510aa3fdc89dc01871e2eb 100644 (file)
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -59,25 +59,6 @@
 #define NGBE_EEPROM_VERSION_L                  0x1D
 #define NGBE_EEPROM_VERSION_H                  0x1E
 
-/* mdio access */
-#define NGBE_MSCA                              0x11200
-#define NGBE_MSCA_RA(v)                                FIELD_PREP(U16_MAX, v)
-#define NGBE_MSCA_PA(v)                                FIELD_PREP(GENMASK(20, 16), v)
-#define NGBE_MSCA_DA(v)                                FIELD_PREP(GENMASK(25, 21), v)
-#define NGBE_MSCC                              0x11204
-#define NGBE_MSCC_CMD(v)                       FIELD_PREP(GENMASK(17, 16), v)
-
-enum NGBE_MSCA_CMD_value {
-       NGBE_MSCA_CMD_RSV = 0,
-       NGBE_MSCA_CMD_WRITE,
-       NGBE_MSCA_CMD_POST_READ,
-       NGBE_MSCA_CMD_READ,
-};
-
-#define NGBE_MSCC_SADDR                                BIT(18)
-#define NGBE_MSCC_BUSY                         BIT(22)
-#define NGBE_MDIO_CLK(v)                       FIELD_PREP(GENMASK(21, 19), v)
-
 /* Media-dependent registers. */
 #define NGBE_MDIO_CLAUSE_SELECT                        0x11220