hwmon: (w83627ehf) Fix temp2 source for W83627UHG

Properly set the source of temp2 for the W83627UHG. Also fix a
comment right before that, and document the W83627UHG as reporting up
to 3 temperatures.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 3f44dbdfda70fd019609b5205e02aebd1df628db..75f3155c036e5ef6ad0ae743842f485d54ca9e19 100644 (file)
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
 (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
 as Winbond chips.
 
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
 (except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).

diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 3e1fa52d57bfcb8ccb7f5ce9539a97252734b764..a658d62c5e102ee2e492d4e68cb2f121fe24a0b5 100644 (file)
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -39,7 +39,7 @@
                                               0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
     w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
-    w83627uhg    8      2       2       2      0xa230 0xc1    0x5ca3
+    w83627uhg    8      2       2       3      0xa230 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
     w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
     nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
@@ -2158,16 +2158,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
                w83627ehf_set_temp_reg_ehf(data, 3);
 
                /*
-                * Temperature sources for temp1 and temp2 are selected with
+                * Temperature sources for temp2 and temp3 are selected with
                 * bank 0, registers 0x49 and 0x4a.
                 */
                data->temp_src[0] = 0;  /* SYSTIN */
                reg = w83627ehf_read_value(data, 0x49) & 0x07;
                /* Adjust to have the same mapping as other source registers */
                if (reg == 0)
-                       data->temp_src[1]++;
+                       data->temp_src[1] = 1;
                else if (reg >= 2 && reg <= 5)
-                       data->temp_src[1] += 2;
+                       data->temp_src[1] = reg + 2;
                else    /* should never happen */
                        data->have_temp &= ~(1 << 1);
                reg = w83627ehf_read_value(data, 0x4a);