ath9k: reset after PCI FATAL/PERR interrupts

ath9k_hw_getisr() doesn't appear to set anything in the status mask for
PCI FATAL or PERR interrupts (AR_INTR_SYNC_HOST1_FATAL/PERR), which
the open-source HAL seems to do.  This means that the card isn't reset
after these interrupts.

This patch seems to fix a problem where the wireless drops out with an
"ath9k: received PCI FATAL interrupt" in dmesg after some time; the
hardware is an AR5416 in an ASUS WL-500W running 2.6.28.7 (OpenWRT) and
compat-wireless 2009-03-31.

Signed-off-by: Steven Luo <steven@steven676.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 24299e65fdcf82d00e21a54227a57937e1229268..9cb85b0e9851d44ce1c2f5b1671997a90885e73b 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2976,6 +2976,7 @@ bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
                                DPRINTF(ah->ah_sc, ATH_DBG_ANY,
                                        "received PCI PERR interrupt\n");
                        }
+                       *masked |= ATH9K_INT_FATAL;
                }
                if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
                        DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,