regulator: palmas: fix regmap offsets for enable/disable

I forgot to apply the offsets for the regmap helper functions for
enable/disable on SMPS10 and the LDO regulators. This means regulators
will not enable/disable correctly.

Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Tested-by: Sebastien Guiriec <s-guiriec@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 9b7ca90057d53806c581387bba8c6ab72ae46826..795f75a6ac3342537a18600e2d0414b1f011caaf 100644 (file)
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -673,7 +673,9 @@ static __devinit int palmas_probe(struct platform_device *pdev)
                        pmic->desc[id].ops = &palmas_ops_smps10;
                        pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
                        pmic->desc[id].vsel_mask = SMPS10_VSEL;
-                       pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+                       pmic->desc[id].enable_reg =
+                                       PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+                                                       PALMAS_SMPS10_STATUS);
                        pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
                }
 
@@ -739,7 +741,8 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 
                pmic->desc[id].type = REGULATOR_VOLTAGE;
                pmic->desc[id].owner = THIS_MODULE;
-               pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+               pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+                                               palmas_regs_info[id].ctrl_addr);
                pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
 
                if (pdata && pdata->reg_data)