drm/i915/ddi: Don't rewrite DDI_BUF_CTL reg during DP link training

The value we program to DDI_BUF_CTL changes at the following places:
- At enabling/disabling the output to configure the port width etc, and
  to enable/disable the DDI BUF function.
- At the beginning/end of link re-training to disable/re-enable the DDI
  BUF function.
- On HSW/BDW/SKL to change the voltage swing/pre-emph levels.

Except of the above the value we program to the DDI_BUF_CTL register
(intel_dp->DP) doesn't change, so no need to reprogram the register when
changing the link training patterns (which is programmed via the
DP_TP_CTL register on DDI platforms).

v2:
- Fix the commit message wrt. voltage/pre-emph level values in
  intel_dp->DP. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714153141.10280-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index c467f18d5e1bec36f3edcbf68102df5e3ffb6c8a..424d596715619656a2609a559f5e0d0542d568db 100644 (file)
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4060,7 +4060,6 @@ static void intel_ddi_set_link_train(struct intel_dp *intel_dp,
 {
        struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
        u8 train_pat_mask = drm_dp_training_pattern_mask(intel_dp->dpcd);
-       enum port port = dp_to_dig_port(intel_dp)->base.port;
        u32 temp;
 
        temp = intel_de_read(dev_priv, intel_dp->regs.dp_tp_ctl);
@@ -4085,9 +4084,6 @@ static void intel_ddi_set_link_train(struct intel_dp *intel_dp,
        }
 
        intel_de_write(dev_priv, intel_dp->regs.dp_tp_ctl, temp);
-
-       intel_de_write(dev_priv, DDI_BUF_CTL(port), intel_dp->DP);
-       intel_de_posting_read(dev_priv, DDI_BUF_CTL(port));
 }
 
 static void intel_ddi_set_idle_link_train(struct intel_dp *intel_dp)