net/mlx5: Implement devlink total_vfs parameter

Some devices support both symmetric (same value for all PFs) and
asymmetric, while others only support symmetric configuration. This
implementation prefers asymmetric, since it is closer to the devlink
model (per function settings), but falls back to symmetric when needed.

Example usage:
  devlink dev param set pci/0000:01:00.0 name total_vfs value <u16> cmode permanent
  devlink dev reload pci/0000:01:00.0 action fw_activate
  echo 1 >/sys/bus/pci/devices/0000:01:00.0/remove
  echo 1 >/sys/bus/pci/rescan
  cat /sys/bus/pci/devices/0000:01:00.0/sriov_totalvfs

Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst
index c3610f7c1d4b4c87ca795679baab431b8c1f75b8..07b1424cbfbbe25c6da7b76ee727db5f29d7dd1a 100644 (file)
--- a/Documentation/networking/devlink/mlx5.rst
+++ b/Documentation/networking/devlink/mlx5.rst
@@ -40,6 +40,28 @@ Parameters
      - Boolean
      - Applies to each physical function (PF) independently, if the device
        supports it. Otherwise, it applies symmetrically to all PFs.
+   * - ``total_vfs``
+     - permanent
+     - The range is between 1 and a device-specific max.
+     - Applies to each physical function (PF) independently, if the device
+       supports it. Otherwise, it applies symmetrically to all PFs.
+
+Note: permanent parameters such as ``enable_sriov`` and ``total_vfs`` require FW reset to take effect
+
+.. code-block:: bash
+
+   # setup parameters
+   devlink dev param set pci/0000:01:00.0 name enable_sriov value true cmode permanent
+   devlink dev param set pci/0000:01:00.0 name total_vfs value 8 cmode permanent
+
+   # Fw reset
+   devlink dev reload pci/0000:01:00.0 action fw_activate
+
+   # for PCI related config such as sriov PCI reset/rescan is required:
+   echo 1 >/sys/bus/pci/devices/0000:01:00.0/remove
+   echo 1 >/sys/bus/pci/rescan
+   grep ^ /sys/bus/pci/devices/0000:01:00.0/sriov_*
+
 
 The ``mlx5`` driver also implements the following driver-specific
 parameters.

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/nv_param.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/nv_param.c
index ed2129843ec7446d0e7c538e298a5149285d2a44..383d8cfe4c0abb069bf76fea5ce564e5938e24cc 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/nv_param.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/nv_param.c
@@ -412,10 +412,142 @@ static int mlx5_devlink_enable_sriov_set(struct devlink *devlink, u32 id,
        return mlx5_nv_param_write(dev, mnvda, sizeof(mnvda));
 }
 
+static int mlx5_devlink_total_vfs_get(struct devlink *devlink, u32 id,
+                                     struct devlink_param_gset_ctx *ctx)
+{
+       struct mlx5_core_dev *dev = devlink_priv(devlink);
+       u32 mnvda[MLX5_ST_SZ_DW(mnvda_reg)] = {};
+       void *data;
+       int err;
+
+       data = MLX5_ADDR_OF(mnvda_reg, mnvda, configuration_item_data);
+
+       err = mlx5_nv_param_read_global_pci_cap(dev, mnvda, sizeof(mnvda));
+       if (err)
+               return err;
+
+       if (!MLX5_GET(nv_global_pci_cap, data, sriov_support)) {
+               ctx->val.vu32 = 0;
+               return 0;
+       }
+
+       memset(mnvda, 0, sizeof(mnvda));
+       err = mlx5_nv_param_read_global_pci_conf(dev, mnvda, sizeof(mnvda));
+       if (err)
+               return err;
+
+       if (!MLX5_GET(nv_global_pci_conf, data, per_pf_total_vf)) {
+               ctx->val.vu32 = MLX5_GET(nv_global_pci_conf, data, total_vfs);
+               return 0;
+       }
+
+       /* SRIOV is per PF */
+       memset(mnvda, 0, sizeof(mnvda));
+       err = mlx5_nv_param_read_per_host_pf_conf(dev, mnvda, sizeof(mnvda));
+       if (err)
+               return err;
+
+       ctx->val.vu32 = MLX5_GET(nv_pf_pci_conf, data, total_vf);
+
+       return 0;
+}
+
+static int mlx5_devlink_total_vfs_set(struct devlink *devlink, u32 id,
+                                     struct devlink_param_gset_ctx *ctx,
+                                     struct netlink_ext_ack *extack)
+{
+       struct mlx5_core_dev *dev = devlink_priv(devlink);
+       u32 mnvda[MLX5_ST_SZ_DW(mnvda_reg)];
+       bool per_pf_support;
+       void *data;
+       int err;
+
+       err = mlx5_nv_param_read_global_pci_cap(dev, mnvda, sizeof(mnvda));
+       if (err) {
+               NL_SET_ERR_MSG_MOD(extack, "Failed to read global pci cap");
+               return err;
+       }
+
+       data = MLX5_ADDR_OF(mnvda_reg, mnvda, configuration_item_data);
+       if (!MLX5_GET(nv_global_pci_cap, data, sriov_support)) {
+               NL_SET_ERR_MSG_MOD(extack, "Not configurable on this device");
+               return -EOPNOTSUPP;
+       }
+
+       per_pf_support = MLX5_GET(nv_global_pci_cap, data,
+                                 per_pf_total_vf_supported);
+       if (!per_pf_support) {
+               /* We don't allow global SRIOV setting on per PF devlink */
+               NL_SET_ERR_MSG_MOD(extack,
+                                  "SRIOV is not per PF on this device");
+               return -EOPNOTSUPP;
+       }
+
+       memset(mnvda, 0, sizeof(mnvda));
+       err = mlx5_nv_param_read_global_pci_conf(dev, mnvda, sizeof(mnvda));
+       if (err)
+               return err;
+
+       MLX5_SET(nv_global_pci_conf, data, sriov_valid, 1);
+       MLX5_SET(nv_global_pci_conf, data, per_pf_total_vf, per_pf_support);
+
+       if (!per_pf_support) {
+               MLX5_SET(nv_global_pci_conf, data, total_vfs, ctx->val.vu32);
+               return mlx5_nv_param_write(dev, mnvda, sizeof(mnvda));
+       }
+
+       /* SRIOV is per PF */
+       err = mlx5_nv_param_write(dev, mnvda, sizeof(mnvda));
+       if (err)
+               return err;
+
+       memset(mnvda, 0, sizeof(mnvda));
+       err = mlx5_nv_param_read_per_host_pf_conf(dev, mnvda, sizeof(mnvda));
+       if (err)
+               return err;
+
+       data = MLX5_ADDR_OF(mnvda_reg, mnvda, configuration_item_data);
+       MLX5_SET(nv_pf_pci_conf, data, total_vf, ctx->val.vu32);
+       return mlx5_nv_param_write(dev, mnvda, sizeof(mnvda));
+}
+
+static int mlx5_devlink_total_vfs_validate(struct devlink *devlink, u32 id,
+                                          union devlink_param_value val,
+                                          struct netlink_ext_ack *extack)
+{
+       struct mlx5_core_dev *dev = devlink_priv(devlink);
+       u32 cap[MLX5_ST_SZ_DW(mnvda_reg)];
+       void *data;
+       u16 max;
+       int err;
+
+       data = MLX5_ADDR_OF(mnvda_reg, cap, configuration_item_data);
+
+       err = mlx5_nv_param_read_global_pci_cap(dev, cap, sizeof(cap));
+       if (err)
+               return err;
+
+       if (!MLX5_GET(nv_global_pci_cap, data, max_vfs_per_pf_valid))
+               return 0; /* optimistic, but set might fail later */
+
+       max = MLX5_GET(nv_global_pci_cap, data, max_vfs_per_pf);
+       if (val.vu16 > max) {
+               NL_SET_ERR_MSG_FMT_MOD(extack,
+                                      "Max allowed by device is %u", max);
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
 static const struct devlink_param mlx5_nv_param_devlink_params[] = {
        DEVLINK_PARAM_GENERIC(ENABLE_SRIOV, BIT(DEVLINK_PARAM_CMODE_PERMANENT),
                              mlx5_devlink_enable_sriov_get,
                              mlx5_devlink_enable_sriov_set, NULL),
+       DEVLINK_PARAM_GENERIC(TOTAL_VFS, BIT(DEVLINK_PARAM_CMODE_PERMANENT),
+                             mlx5_devlink_total_vfs_get,
+                             mlx5_devlink_total_vfs_set,
+                             mlx5_devlink_total_vfs_validate),
        DEVLINK_PARAM_DRIVER(MLX5_DEVLINK_PARAM_ID_CQE_COMPRESSION_TYPE,
                             "cqe_compress_type", DEVLINK_PARAM_TYPE_STRING,
                             BIT(DEVLINK_PARAM_CMODE_PERMANENT),