net: stmmac: use phylink_limit_mac_speed()

Use phylink_limit_mac_speed() to limit the MAC capabilities rather
than coding this for each speed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qZAXO-005pU7-61@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe733a9f5fe4c5c1414c24bdd25b24ff7a8dfb38..30a085f2b8facd9948f11bdee47eb1f62579445e 100644 (file)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1200,10 +1200,10 @@ static int stmmac_init_phy(struct net_device *dev)
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
        struct stmmac_mdio_bus_data *mdio_bus_data;
-       int max_speed = priv->plat->max_speed;
        int mode = priv->plat->phy_interface;
        struct fwnode_handle *fwnode;
        struct phylink *phylink;
+       int max_speed;
 
        priv->phylink_config.dev = &priv->dev->dev;
        priv->phylink_config.type = PHYLINK_NETDEV;
@@ -1222,29 +1222,18 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
                                    priv->phylink_config.supported_interfaces);
 
        priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-               MAC_10 | MAC_100;
-
-       if (!max_speed || max_speed >= 1000)
-               priv->phylink_config.mac_capabilities |= MAC_1000;
+               MAC_10 | MAC_100 | MAC_1000;
 
        if (priv->plat->has_gmac4) {
-               if (!max_speed || max_speed >= 2500)
-                       priv->phylink_config.mac_capabilities |= MAC_2500FD;
+               priv->phylink_config.mac_capabilities |= MAC_2500FD;
        } else if (priv->plat->has_xgmac) {
-               if (!max_speed || max_speed >= 2500)
-                       priv->phylink_config.mac_capabilities |= MAC_2500FD;
-               if (!max_speed || max_speed >= 5000)
-                       priv->phylink_config.mac_capabilities |= MAC_5000FD;
-               if (!max_speed || max_speed >= 10000)
-                       priv->phylink_config.mac_capabilities |= MAC_10000FD;
-               if (!max_speed || max_speed >= 25000)
-                       priv->phylink_config.mac_capabilities |= MAC_25000FD;
-               if (!max_speed || max_speed >= 40000)
-                       priv->phylink_config.mac_capabilities |= MAC_40000FD;
-               if (!max_speed || max_speed >= 50000)
-                       priv->phylink_config.mac_capabilities |= MAC_50000FD;
-               if (!max_speed || max_speed >= 100000)
-                       priv->phylink_config.mac_capabilities |= MAC_100000FD;
+               priv->phylink_config.mac_capabilities |= MAC_2500FD;
+               priv->phylink_config.mac_capabilities |= MAC_5000FD;
+               priv->phylink_config.mac_capabilities |= MAC_10000FD;
+               priv->phylink_config.mac_capabilities |= MAC_25000FD;
+               priv->phylink_config.mac_capabilities |= MAC_40000FD;
+               priv->phylink_config.mac_capabilities |= MAC_50000FD;
+               priv->phylink_config.mac_capabilities |= MAC_100000FD;
        }
 
        /* Half-Duplex can only work with single queue */
@@ -1253,6 +1242,10 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
                        ~(MAC_10HD | MAC_100HD | MAC_1000HD);
        priv->phylink_config.mac_managed_pm = true;
 
+       max_speed = priv->plat->max_speed;
+       if (max_speed)
+               phylink_limit_mac_speed(&priv->phylink_config, max_speed);
+
        fwnode = priv->plat->port_node;
        if (!fwnode)
                fwnode = dev_fwnode(priv->device);