mmc: core: use mrq->sbc when sending CMD23 for RPMB

When sending out CMD23 in the blk preparation, the comment there
rightfully says:

	 * However, it is not sufficient to just send CMD23,
	 * and avoid the final CMD12, as on an error condition
	 * CMD12 (stop) needs to be sent anyway. This, coupled
	 * with Auto-CMD23 enhancements provided by some
	 * hosts, means that the complexity of dealing
	 * with this is best left to the host. If CMD23 is
	 * supported by card and host, we'll fill sbc in and let
	 * the host deal with handling it correctly.

Let's do this behaviour for RPMB as well, and not send CMD23
independently. Otherwise IP cores (like Renesas SDHI) may timeout
because of automatic CMD23/CMD12 handling.

Reported-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index c35b5b08bb334626279d3d4f12a8a4c6af691492..111934838da2c14ef439a4a3b2907d46093380c9 100644 (file)
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -472,7 +472,7 @@ out:
 static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
                               struct mmc_blk_ioc_data *idata)
 {
-       struct mmc_command cmd = {};
+       struct mmc_command cmd = {}, sbc = {};
        struct mmc_data data = {};
        struct mmc_request mrq = {};
        struct scatterlist sg;
@@ -550,10 +550,15 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
        }
 
        if (idata->rpmb) {
-               err = mmc_set_blockcount(card, data.blocks,
-                       idata->ic.write_flag & (1 << 31));
-               if (err)
-                       return err;
+               sbc.opcode = MMC_SET_BLOCK_COUNT;
+               /*
+                * We don't do any blockcount validation because the max size
+                * may be increased by a future standard. We just copy the
+                * 'Reliable Write' bit here.
+                */
+               sbc.arg = data.blocks | (idata->ic.write_flag & BIT(31));
+               sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
+               mrq.sbc = &sbc;
        }
 
        if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) &&