mmc: sdhci: R1B command handling + MMC_CAP_ERASE.

ERASE command needs R1B response, so fix R1B-type command
handling for SDHCI controller. For non-DAT commands using a busy
response, the cmd->cmd_timeout_ms (in ms) field is used for timeout
calculations.

Based on patch by Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5d20661bc357ba387601b6b2089185bceb144aac..ab17344fc7b32012f1bff310501839bb5c2b7d59 100644 (file)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -40,7 +40,6 @@
 
 static unsigned int debug_quirks = 0;
 
-static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
 static void sdhci_finish_data(struct sdhci_host *);
 
 static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
@@ -591,9 +590,10 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
                data->sg_len, direction);
 }
 
-static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 {
        u8 count;
+       struct mmc_data *data = cmd->data;
        unsigned target_timeout, current_timeout;
 
        /*
@@ -605,12 +605,16 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
        if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
                return 0xE;
 
-       /* timeout in us */
-       target_timeout = data->timeout_ns / 1000 +
-               data->timeout_clks / host->clock;
+       /* Unspecified timeout, assume max */
+       if (!data && !cmd->cmd_timeout_ms)
+               return 0xE;
 
-       if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
-               host->timeout_clk = host->clock / 1000;
+       /* timeout in us */
+       if (!data)
+               target_timeout = cmd->cmd_timeout_ms * 1000;
+       else
+               target_timeout = data->timeout_ns / 1000 +
+                       data->timeout_clks / host->clock;
 
        /*
         * Figure out needed cycles.
@@ -632,8 +636,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
        }
 
        if (count >= 0xF) {
-               printk(KERN_WARNING "%s: Too large timeout requested!\n",
-                       mmc_hostname(host->mmc));
+               printk(KERN_WARNING "%s: Too large timeout requested for CMD%d!\n",
+                      mmc_hostname(host->mmc), cmd->opcode);
                count = 0xE;
        }
 
@@ -651,15 +655,21 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
                sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
 }
 
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 {
        u8 count;
        u8 ctrl;
+       struct mmc_data *data = cmd->data;
        int ret;
 
        WARN_ON(host->data);
 
-       if (data == NULL)
+       if (data || (cmd->flags & MMC_RSP_BUSY)) {
+               count = sdhci_calc_timeout(host, cmd);
+               sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+       }
+
+       if (!data)
                return;
 
        /* Sanity checks */
@@ -670,9 +680,6 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
        host->data = data;
        host->data_early = 0;
 
-       count = sdhci_calc_timeout(host, data);
-       sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
-
        if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
                host->flags |= SDHCI_REQ_USE_DMA;
 
@@ -920,7 +927,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 
        host->cmd = cmd;
 
-       sdhci_prepare_data(host, cmd->data);
+       sdhci_prepare_data(host, cmd);
 
        sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
 
@@ -1874,6 +1881,9 @@ int sdhci_add_host(struct sdhci_host *host)
        if (caps & SDHCI_TIMEOUT_CLK_UNIT)
                host->timeout_clk *= 1000;
 
+       if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
+               host->timeout_clk = host->clock / 1000;
+
        /*
         * Set host parameters.
         */
@@ -1886,7 +1896,7 @@ int sdhci_add_host(struct sdhci_host *host)
                mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
        mmc->f_max = host->max_clk;
-       mmc->caps |= MMC_CAP_SDIO_IRQ;
+       mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE;
 
        /*
         * A controller may support 8-bit width, but the board itself