ARM: dts: hisilicon: add SD5203 dts

Add sd5203.dts for Hisilicon SD5203 SoC platform.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae3029d589789c3afb0da4a46713a2..1d1262df5c5590711f5ac9440ec2cd29afcf9c34 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -357,6 +357,8 @@ dtb-$(CONFIG_ARCH_MPS2) += \
        mps2-an399.dtb
 dtb-$(CONFIG_ARCH_MOXART) += \
        moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+       sd5203.dtb
 dtb-$(CONFIG_SOC_IMX1) += \
        imx1-ads.dtb \
        imx1-apf9328.dtb

diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
new file mode 100644 (file)
index 0000000..3cc9a23
--- /dev/null
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 Hisilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+       model = "Hisilicon SD5203";
+       compatible = "H836ASDJ", "hisilicon,sd5203";
+       interrupt-parent = <&vic>;
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       chosen {
+               bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+       };
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0 {
+                       device_type = "cpu";
+                       compatible = "arm,arm926ej-s";
+                       reg = <0x0>;
+               };
+       };
+
+       memory@30000000 {
+               device_type = "memory";
+               reg = <0x30000000 0x8000000>;
+       };
+
+       soc {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "simple-bus";
+               ranges;
+
+               vic: interrupt-controller@10130000 {
+                       compatible = "snps,dw-apb-ictl";
+                       reg = <0x10130000 0x1000>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+               };
+
+               refclk125mhz: refclk125mhz {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <125000000>;
+               };
+
+               timer0: timer@16002000 {
+                       compatible = "arm,sp804", "arm,primecell";
+                       reg = <0x16002000 0x1000>;
+                       interrupts = <4>;
+                       clocks = <&refclk125mhz>;
+                       clock-names = "apb_pclk";
+               };
+
+               timer1: timer@16003000 {
+                       compatible = "arm,sp804", "arm,primecell";
+                       reg = <0x16003000 0x1000>;
+                       interrupts = <5>;
+                       clocks = <&refclk125mhz>;
+                       clock-names = "apb_pclk";
+               };
+
+               uart0: serial@1600d000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x1600d000 0x1000>;
+                       bus_id = "uart0";
+                       clocks = <&refclk125mhz>;
+                       clock-names = "baudclk", "apb_pclk";
+                       reg-shift = <2>;
+                       interrupts = <17>;
+               };
+
+               uart1: serial@1600c000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x1600c000 0x1000>;
+                       clocks = <&refclk125mhz>;
+                       clock-names = "baudclk", "apb_pclk";
+                       reg-shift = <2>;
+                       interrupts = <16>;
+                       status = "disabled";
+               };
+       };
+};