ioapic/tracing: Remove last DPRINTFs

Remove the last few DPRINTFs from hw/intc/ioapic.c and turn
them into tracing.  In one case it's a new trace, in the others
it's just adding a parameter to the existing traces.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171102180310.24760-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

diff --git a/hw/intc/ioapic.c b/hw/intc/ioapic.c
index 37c4386ae3a446fb08758211af9f6660b846e536..36139a4db6fda0e790949c565bcc036e4592c52a 100644 (file)
--- a/hw/intc/ioapic.c
+++ b/hw/intc/ioapic.c
@@ -35,15 +35,6 @@
 #include "hw/i386/x86-iommu.h"
 #include "trace.h"
 
-//#define DEBUG_IOAPIC
-
-#ifdef DEBUG_IOAPIC
-#define DPRINTF(fmt, ...)                                       \
-    do { printf("ioapic: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...)
-#endif
-
 #define APIC_DELIVERY_MODE_SHIFT 8
 #define APIC_POLARITY_SHIFT 14
 #define APIC_TRIG_MODE_SHIFT 15
@@ -157,7 +148,7 @@ static void ioapic_set_irq(void *opaque, int vector, int level)
      * to GSI 2.  GSI maps to ioapic 1-1.  This is not
      * the cleanest way of doing it but it should work. */
 
-    DPRINTF("%s: %s vec %x\n", __func__, level ? "raise" : "lower", vector);
+    trace_ioapic_set_irq(vector, level);
     if (vector == 0) {
         vector = 2;
     }
@@ -290,11 +281,10 @@ ioapic_mem_read(void *opaque, hwaddr addr, unsigned int size)
                 }
             }
         }
-        DPRINTF("read: %08x = %08x\n", s->ioregsel, val);
         break;
     }
 
-    trace_ioapic_mem_read(addr, size, val);
+    trace_ioapic_mem_read(addr, s->ioregsel, size, val);
 
     return val;
 }
@@ -335,7 +325,7 @@ ioapic_mem_write(void *opaque, hwaddr addr, uint64_t val,
     int index;
 
     addr &= 0xff;
-    trace_ioapic_mem_write(addr, size, val);
+    trace_ioapic_mem_write(addr, s->ioregsel, size, val);
 
     switch (addr) {
     case IOAPIC_IOREGSEL:
@@ -345,7 +335,6 @@ ioapic_mem_write(void *opaque, hwaddr addr, uint64_t val,
         if (size != 4) {
             break;
         }
-        DPRINTF("write: %08x = %08" PRIx64 "\n", s->ioregsel, val);
         switch (s->ioregsel) {
         case IOAPIC_REG_ID:
             s->id = (val >> IOAPIC_ID_SHIFT) & IOAPIC_ID_MASK;

diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index b86f242b0fcf82826fce69bdb487ee11b2ed0b91..b298fac7c6a8a05cb0ab0ef0bd05ea18b1652aab 100644 (file)
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -18,8 +18,9 @@ apic_mem_writel(uint64_t addr, uint32_t val) "0x%"PRIx64" = 0x%08x"
 ioapic_set_remote_irr(int n) "set remote irr for pin %d"
 ioapic_clear_remote_irr(int n, int vector) "clear remote irr for pin %d vector %d"
 ioapic_eoi_broadcast(int vector) "EOI broadcast for vector %d"
-ioapic_mem_read(uint8_t addr, uint8_t size, uint32_t val) "ioapic mem read addr 0x%"PRIx8" size 0x%"PRIx8" retval 0x%"PRIx32
-ioapic_mem_write(uint8_t addr, uint8_t size, uint32_t val) "ioapic mem write addr 0x%"PRIx8" size 0x%"PRIx8" val 0x%"PRIx32
+ioapic_mem_read(uint8_t addr, uint8_t regsel, uint8_t size, uint32_t val) "ioapic mem read addr 0x%"PRIx8" regsel: 0x%"PRIx8" size 0x%"PRIx8" retval 0x%"PRIx32
+ioapic_mem_write(uint8_t addr, uint8_t regsel, uint8_t size, uint32_t val) "ioapic mem write addr 0x%"PRIx8" regsel: 0x%"PRIx8" size 0x%"PRIx8" val 0x%"PRIx32
+ioapic_set_irq(int vector, int level) "vector: %d level: %d"
 
 # hw/intc/slavio_intctl.c
 slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = 0x%x"