]> www.infradead.org Git - users/willy/linux.git/commitdiff
media: i2c: imx290: Use V4L2 subdev active state
authorLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Mon, 17 Oct 2022 10:44:27 +0000 (12:44 +0200)
committerMauro Carvalho Chehab <mchehab@kernel.org>
Fri, 3 Feb 2023 14:03:36 +0000 (15:03 +0100)
Use the V4L2 subdev active state API to store the active format. This
simplifies the driver not only by dropping the imx290 current_format
field, but it also allows dropping the imx290 lock, replaced with the
state lock.

The lock check in imx290_ctrl_update() can be dropped as
imx290_set_fmt() can't be called anywmore with which set to ACTIVE
before controls are initialized.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
drivers/media/i2c/imx290.c

index c1d18ec51e41706712a403f1cc0481ef75443daa..1aa5ab0c57ce0d43cde9dda58bc553991a521ae9 100644 (file)
@@ -177,12 +177,12 @@ struct imx290 {
        struct clk *xclk;
        struct regmap *regmap;
        u8 nlanes;
-       u8 bpp;
 
        struct v4l2_subdev sd;
        struct media_pad pad;
-       struct v4l2_mbus_framefmt current_format;
+
        const struct imx290_mode *current_mode;
+       u8 bpp;
 
        struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
        struct gpio_desc *rst_gpio;
@@ -192,8 +192,6 @@ struct imx290 {
        struct v4l2_ctrl *pixel_rate;
        struct v4l2_ctrl *hblank;
        struct v4l2_ctrl *vblank;
-
-       struct mutex lock;
 };
 
 static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
@@ -524,13 +522,14 @@ static int imx290_set_black_level(struct imx290 *imx290,
                            black_level >> (16 - imx290->bpp), err);
 }
 
-static int imx290_write_current_format(struct imx290 *imx290)
+static int imx290_setup_format(struct imx290 *imx290,
+                              const struct v4l2_mbus_framefmt *format)
 {
        const struct imx290_regval *regs;
        unsigned int num_regs;
        int ret;
 
-       switch (imx290->current_format.code) {
+       switch (format->code) {
        case MEDIA_BUS_FMT_SRGGB10_1X10:
                regs = imx290_10bit_settings;
                num_regs = ARRAY_SIZE(imx290_10bit_settings);
@@ -563,6 +562,15 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
                                             struct imx290, ctrls);
        int ret = 0;
 
+       /*
+        * Return immediately for controls that don't need to be applied to the
+        * device. Those controls are modified in imx290_ctrl_update(), which
+        * is called at probe time before runtime PM is initialized, so we
+        * can't proceed to the pm_runtime_get_if_in_use() call below.
+        */
+       if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
+               return 0;
+
        /* V4L2 controls values will be applied only when power is already up */
        if (!pm_runtime_get_if_in_use(imx290->dev))
                return 0;
@@ -592,6 +600,7 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
                                               &ret);
                }
                break;
+
        default:
                ret = -EINVAL;
                break;
@@ -625,13 +634,6 @@ static void imx290_ctrl_update(struct imx290 *imx290,
        s64 link_freq = imx290_link_freqs_ptr(imx290)[mode->link_freq_index];
        u64 pixel_rate;
 
-       /*
-        * This function may be called from imx290_set_fmt() before controls
-        * get created by imx290_ctrl_init(). Return immediately in that case.
-        */
-       if (!imx290->ctrls.lock)
-               return;
-
        /* pixel rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
        pixel_rate = link_freq * 2 * imx290->nlanes;
        do_div(pixel_rate, imx290->bpp);
@@ -653,7 +655,6 @@ static int imx290_ctrl_init(struct imx290 *imx290)
                return ret;
 
        v4l2_ctrl_handler_init(&imx290->ctrls, 9);
-       imx290->ctrls.lock = &imx290->lock;
 
        /*
         * The sensor has an analog gain and a digital gain, both controlled
@@ -718,10 +719,6 @@ static int imx290_ctrl_init(struct imx290 *imx290)
                return ret;
        }
 
-       mutex_lock(imx290->ctrls.lock);
-       imx290_ctrl_update(imx290, imx290->current_mode);
-       mutex_unlock(imx290->ctrls.lock);
-
        return 0;
 }
 
@@ -730,8 +727,10 @@ static int imx290_ctrl_init(struct imx290 *imx290)
  */
 
 /* Start streaming */
-static int imx290_start_streaming(struct imx290 *imx290)
+static int imx290_start_streaming(struct imx290 *imx290,
+                                 struct v4l2_subdev_state *state)
 {
+       const struct v4l2_mbus_framefmt *format;
        int ret;
 
        /* Set init register settings */
@@ -744,7 +743,8 @@ static int imx290_start_streaming(struct imx290 *imx290)
        }
 
        /* Apply the register values related to current frame format */
-       ret = imx290_write_current_format(imx290);
+       format = v4l2_subdev_get_pad_format(&imx290->sd, state, 0);
+       ret = imx290_setup_format(imx290, format);
        if (ret < 0) {
                dev_err(imx290->dev, "Could not set frame format\n");
                return ret;
@@ -764,7 +764,7 @@ static int imx290_start_streaming(struct imx290 *imx290)
                return ret;
 
        /* Apply customized values from user */
-       ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
+       ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
        if (ret) {
                dev_err(imx290->dev, "Could not sync v4l2 controls\n");
                return ret;
@@ -793,39 +793,32 @@ static int imx290_stop_streaming(struct imx290 *imx290)
 static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
 {
        struct imx290 *imx290 = to_imx290(sd);
+       struct v4l2_subdev_state *state;
        int ret = 0;
 
+       state = v4l2_subdev_lock_and_get_active_state(sd);
+
        if (enable) {
                ret = pm_runtime_resume_and_get(imx290->dev);
                if (ret < 0)
-                       goto unlock_and_return;
+                       goto unlock;
 
-               ret = imx290_start_streaming(imx290);
+               ret = imx290_start_streaming(imx290, state);
                if (ret) {
                        dev_err(imx290->dev, "Start stream failed\n");
                        pm_runtime_put(imx290->dev);
-                       goto unlock_and_return;
+                       goto unlock;
                }
        } else {
                imx290_stop_streaming(imx290);
                pm_runtime_put(imx290->dev);
        }
 
-unlock_and_return:
-
+unlock:
+       v4l2_subdev_unlock_state(state);
        return ret;
 }
 
-static struct v4l2_mbus_framefmt *
-imx290_get_pad_format(struct imx290 *imx290, struct v4l2_subdev_state *state,
-                     u32 which)
-{
-       if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
-               return &imx290->current_format;
-       else
-               return v4l2_subdev_get_try_format(&imx290->sd, state, 0);
-}
-
 static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
                                 struct v4l2_subdev_state *sd_state,
                                 struct v4l2_subdev_mbus_code_enum *code)
@@ -860,23 +853,6 @@ static int imx290_enum_frame_size(struct v4l2_subdev *sd,
        return 0;
 }
 
-static int imx290_get_fmt(struct v4l2_subdev *sd,
-                         struct v4l2_subdev_state *sd_state,
-                         struct v4l2_subdev_format *fmt)
-{
-       struct imx290 *imx290 = to_imx290(sd);
-       struct v4l2_mbus_framefmt *framefmt;
-
-       mutex_lock(&imx290->lock);
-
-       framefmt = imx290_get_pad_format(imx290, sd_state, fmt->which);
-       fmt->format = *framefmt;
-
-       mutex_unlock(&imx290->lock);
-
-       return 0;
-}
-
 static int imx290_set_fmt(struct v4l2_subdev *sd,
                          struct v4l2_subdev_state *sd_state,
                          struct v4l2_subdev_format *fmt)
@@ -886,8 +862,6 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
        struct v4l2_mbus_framefmt *format;
        unsigned int i;
 
-       mutex_lock(&imx290->lock);
-
        mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290),
                                      imx290_modes_num(imx290), width, height,
                                      fmt->format.width, fmt->format.height);
@@ -905,7 +879,7 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
        fmt->format.code = imx290_formats[i].code;
        fmt->format.field = V4L2_FIELD_NONE;
 
-       format = imx290_get_pad_format(imx290, sd_state, fmt->which);
+       format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
 
        if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
                imx290->current_mode = mode;
@@ -916,8 +890,6 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
 
        *format = fmt->format;
 
-       mutex_unlock(&imx290->lock);
-
        return 0;
 }
 
@@ -925,14 +897,11 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
                                struct v4l2_subdev_state *sd_state,
                                struct v4l2_subdev_selection *sel)
 {
-       struct imx290 *imx290 = to_imx290(sd);
        struct v4l2_mbus_framefmt *format;
 
        switch (sel->target) {
        case V4L2_SEL_TGT_CROP: {
-               format = imx290_get_pad_format(imx290, sd_state, sel->which);
-
-               mutex_lock(&imx290->lock);
+               format = v4l2_subdev_get_pad_format(sd, sd_state, 0);
 
                sel->r.top = IMX920_PIXEL_ARRAY_MARGIN_TOP
                           + (IMX290_PIXEL_ARRAY_RECORDING_HEIGHT - format->height) / 2;
@@ -941,7 +910,6 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
                sel->r.width = format->width;
                sel->r.height = format->height;
 
-               mutex_unlock(&imx290->lock);
                return 0;
        }
 
@@ -970,11 +938,13 @@ static int imx290_get_selection(struct v4l2_subdev *sd,
 static int imx290_entity_init_cfg(struct v4l2_subdev *subdev,
                                  struct v4l2_subdev_state *sd_state)
 {
-       struct v4l2_subdev_format fmt = { 0 };
-
-       fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
-       fmt.format.width = 1920;
-       fmt.format.height = 1080;
+       struct v4l2_subdev_format fmt = {
+               .which = V4L2_SUBDEV_FORMAT_TRY,
+               .format = {
+                       .width = 1920,
+                       .height = 1080,
+               },
+       };
 
        imx290_set_fmt(subdev, sd_state, &fmt);
 
@@ -989,7 +959,7 @@ static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
        .init_cfg = imx290_entity_init_cfg,
        .enum_mbus_code = imx290_enum_mbus_code,
        .enum_frame_size = imx290_enum_frame_size,
-       .get_fmt = imx290_get_fmt,
+       .get_fmt = v4l2_subdev_get_fmt,
        .set_fmt = imx290_set_fmt,
        .get_selection = imx290_get_selection,
 };
@@ -1008,18 +978,8 @@ static int imx290_subdev_init(struct imx290 *imx290)
        struct i2c_client *client = to_i2c_client(imx290->dev);
        int ret;
 
-       /*
-        * Initialize the frame format. In particular, imx290->current_mode
-        * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() call
-        * below relies on these fields.
-        */
-       imx290_entity_init_cfg(&imx290->sd, NULL);
-
-       ret = imx290_ctrl_init(imx290);
-       if (ret < 0) {
-               dev_err(imx290->dev, "Control initialization error %d\n", ret);
-               return ret;
-       }
+       imx290->current_mode = &imx290_modes_ptr(imx290)[0];
+       imx290->bpp = imx290_formats[0].bpp;
 
        v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
        imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
@@ -1031,15 +991,37 @@ static int imx290_subdev_init(struct imx290 *imx290)
        ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
        if (ret < 0) {
                dev_err(imx290->dev, "Could not register media entity\n");
-               v4l2_ctrl_handler_free(&imx290->ctrls);
                return ret;
        }
 
+       ret = imx290_ctrl_init(imx290);
+       if (ret < 0) {
+               dev_err(imx290->dev, "Control initialization error %d\n", ret);
+               goto err_media;
+       }
+
+       imx290->sd.state_lock = imx290->ctrls.lock;
+
+       ret = v4l2_subdev_init_finalize(&imx290->sd);
+       if (ret < 0) {
+               dev_err(imx290->dev, "subdev initialization error %d\n", ret);
+               goto err_ctrls;
+       }
+
+       imx290_ctrl_update(imx290, imx290->current_mode);
+
        return 0;
+
+err_ctrls:
+       v4l2_ctrl_handler_free(&imx290->ctrls);
+err_media:
+       media_entity_cleanup(&imx290->sd.entity);
+       return ret;
 }
 
 static void imx290_subdev_cleanup(struct imx290 *imx290)
 {
+       v4l2_subdev_cleanup(&imx290->sd);
        media_entity_cleanup(&imx290->sd.entity);
        v4l2_ctrl_handler_free(&imx290->ctrls);
 }
@@ -1270,12 +1252,10 @@ static int imx290_probe(struct i2c_client *client)
        if (ret)
                return ret;
 
-       mutex_init(&imx290->lock);
-
        /* Initialize and register subdev. */
        ret = imx290_subdev_init(imx290);
        if (ret)
-               goto err_mutex;
+               return ret;
 
        ret = v4l2_async_register_subdev(&imx290->sd);
        if (ret < 0) {
@@ -1298,8 +1278,6 @@ static int imx290_probe(struct i2c_client *client)
 
 err_subdev:
        imx290_subdev_cleanup(imx290);
-err_mutex:
-       mutex_destroy(&imx290->lock);
 
        return ret;
 }
@@ -1312,8 +1290,6 @@ static void imx290_remove(struct i2c_client *client)
        v4l2_async_unregister_subdev(sd);
        imx290_subdev_cleanup(imx290);
 
-       mutex_destroy(&imx290->lock);
-
        pm_runtime_disable(imx290->dev);
        if (!pm_runtime_status_suspended(imx290->dev))
                imx290_power_off(imx290->dev);