serial: Remove RM9000 series serial driver.

Now that support for RM9000 and platforms based on it has been removed,
remove the serial driver for it as well.  It's really only been a quirk
for an almost 8250 compatible UART anyway.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/tty/serial/8250/8250.c  | 70 +----------------------------------------
 drivers/tty/serial/8250/Kconfig |  9 ------
 include/linux/serial_core.h     |  1 -
 3 files changed, 1 insertion(+), 79 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index d085e3a8ec0644bc9760caa0aed026533905c2a4..5fb6577b94dc9b30c8479766c28ae687d52f3ff8 100644 (file)
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -239,13 +239,6 @@ static const struct serial8250_config uart_config[] = {
                .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
                .flags          = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
        },
-       [PORT_RM9000] = {
-               .name           = "RM9000",
-               .fifo_size      = 16,
-               .tx_loadsz      = 16,
-               .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-               .flags          = UART_CAP_FIFO,
-       },
        [PORT_OCTEON] = {
                .name           = "OCTEON",
                .fifo_size      = 64,
@@ -364,56 +357,6 @@ static void au_serial_dl_write(struct uart_8250_port *up, int value)
 
 #endif
 
-#ifdef CONFIG_SERIAL_8250_RM9K
-
-static const u8
-       regmap_in[8] = {
-               [UART_RX]       = 0x00,
-               [UART_IER]      = 0x0c,
-               [UART_IIR]      = 0x14,
-               [UART_LCR]      = 0x1c,
-               [UART_MCR]      = 0x20,
-               [UART_LSR]      = 0x24,
-               [UART_MSR]      = 0x28,
-               [UART_SCR]      = 0x2c
-       },
-       regmap_out[8] = {
-               [UART_TX]       = 0x04,
-               [UART_IER]      = 0x0c,
-               [UART_FCR]      = 0x18,
-               [UART_LCR]      = 0x1c,
-               [UART_MCR]      = 0x20,
-               [UART_LSR]      = 0x24,
-               [UART_MSR]      = 0x28,
-               [UART_SCR]      = 0x2c
-       };
-
-static unsigned int rm9k_serial_in(struct uart_port *p, int offset)
-{
-       offset = regmap_in[offset] << p->regshift;
-       return readl(p->membase + offset);
-}
-
-static void rm9k_serial_out(struct uart_port *p, int offset, int value)
-{
-       offset = regmap_out[offset] << p->regshift;
-       writel(value, p->membase + offset);
-}
-
-static int rm9k_serial_dl_read(struct uart_8250_port *up)
-{
-       return ((__raw_readl(up->port.membase + 0x10) << 8) |
-               (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff;
-}
-
-static void rm9k_serial_dl_write(struct uart_8250_port *up, int value)
-{
-       __raw_writel(value, up->port.membase + 0x08);
-       __raw_writel(value >> 8, up->port.membase + 0x10);
-}
-
-#endif
-
 static unsigned int hub6_serial_in(struct uart_port *p, int offset)
 {
        offset = offset << p->regshift;
@@ -491,15 +434,6 @@ static void set_io_from_upio(struct uart_port *p)
                p->serial_out = mem32_serial_out;
                break;
 
-#ifdef CONFIG_SERIAL_8250_RM9K
-       case UPIO_RM9000:
-               p->serial_in = rm9k_serial_in;
-               p->serial_out = rm9k_serial_out;
-               up->dl_read = rm9k_serial_dl_read;
-               up->dl_write = rm9k_serial_dl_write;
-               break;
-#endif
-
 #ifdef CONFIG_MIPS_ALCHEMY
        case UPIO_AU:
                p->serial_in = au_serial_in;
@@ -1343,9 +1277,7 @@ static void serial8250_start_tx(struct uart_port *port)
                        unsigned char lsr;
                        lsr = serial_in(up, UART_LSR);
                        up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-                       if ((port->type == PORT_RM9000) ?
-                               (lsr & UART_LSR_THRE) :
-                               (lsr & UART_LSR_TEMT))
+                       if (lsr & UART_LSR_TEMT)
                                serial8250_tx_chars(up);
                }
        }

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index c31133a6ea8e0361f1f84103c469026bda82c077..d79208f4723783869a5686b999e5560f7d5b4253 100644 (file)
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -249,15 +249,6 @@ config SERIAL_8250_ACORN
          system, say Y to this option.  The driver can handle 1, 2, or 3 port
          cards.  If unsure, say N.
 
-config SERIAL_8250_RM9K
-       bool "Support for MIPS RM9xxx integrated serial port"
-       depends on SERIAL_8250 != n && SERIAL_RM9000
-       select SERIAL_8250_SHARE_IRQ
-       help
-         Selecting this option will add support for the integrated serial
-         port hardware found on MIPS RM9122 and similar processors.
-         If unsure, say N.
-
 config SERIAL_8250_FSL
        bool
        depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index a116daa1311347024f5bc761db74709f7683c71d..ec5df74c4506f2d189ed7fe2cd38d30430ee6b7c 100644 (file)
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -136,7 +136,6 @@ struct uart_port {
 #define UPIO_MEM32             (3)
 #define UPIO_AU                        (4)                     /* Au1x00 type IO */
 #define UPIO_TSI               (5)                     /* Tsi108/109 type IO */
-#define UPIO_RM9000            (6)                     /* RM9000 type IO */
 
        unsigned int            read_status_mask;       /* driver specific */
        unsigned int            ignore_status_mask;     /* driver specific */