net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline

Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b9 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00B9 USB Mobile Broadband
S:  SerialNumber=90418e79
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220601040531.6016-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index a659d6fb0b12b43c3cf72ecc670371fafd610f34..571a399c195dd722fbebf92973da790f42acea20 100644 (file)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1389,6 +1389,7 @@ static const struct usb_device_id products[] = {
        {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},    /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
        {QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)}, /* Cinterion CLS8 */
        {QMI_FIXED_INTF(0x1e2d, 0x00b7, 0)},    /* Cinterion MV31 RmNet */
+       {QMI_FIXED_INTF(0x1e2d, 0x00b9, 0)},    /* Cinterion MV31 RmNet based on new baseline */
        {QMI_FIXED_INTF(0x413c, 0x81a2, 8)},    /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
        {QMI_FIXED_INTF(0x413c, 0x81a3, 8)},    /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
        {QMI_FIXED_INTF(0x413c, 0x81a4, 8)},    /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */