ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series

This DTS file covers all one and two port NetCom Plus devices.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a92576e17133257f9b244399e699dee48f1118c9..05dae516930cda334b5f03de532f948af1942ee8 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -754,6 +754,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
        am335x-moxa-uc-8100-me-t.dtb \
        am335x-nano.dtb \
        am335x-netcan-plus-1xx.dtb \
+       am335x-netcom-plus-2xx.dtb \
        am335x-pdu001.dtb \
        am335x-pepper.dtb \
        am335x-phycore-rdk.dtb \

diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
new file mode 100644 (file)
index 0000000..9a6cd8e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+       model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+       uart1_pins: pinmux_uart1_pins {
+               pinctrl-single,pins = <
+                       AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)                      /* RX */
+                       AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)                      /* TX */
+                       AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)            /* CTS */
+                       AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)           /* RTS */
+                       AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)            /* DTR */
+                       AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)             /* DSR */
+                       AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)              /* DCD */
+                       AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)        /* RI */
+               >;
+       };
+
+       uart2_pins: pinmux_uart2_pins {
+               pinctrl-single,pins = <
+                       AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)              /* RX */
+                       AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)               /* TX */
+                       AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* CTS */
+                       AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)     /* RTS */
+                       AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)    /* DTR */
+                       AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* DSR */
+                       AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* DCD */
+                       AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* RI */
+               >;
+       };
+};
+
+&usb0_phy {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       dr_mode = "host";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+       dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+       dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+       dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+       rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+       dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+       dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+       dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+       rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+       status = "okay";
+};
+
+&davinci_mdio {
+       phy0: ethernet-phy@0 {
+               reg = <1>;
+       };
+};
+
+&cpsw_emac0 {
+       phy-mode = "rmii";
+       dual_emac_res_vlan = <1>;
+       phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+       phy-mode = "rgmii-id";
+       dual_emac_res_vlan = <2>;
+       phy-handle = <&phy1>;
+};