dt-bindings: net: Correct indentation and style in DTS example

DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.

No functional changes here, but saves some comments during reviews of
new patches built on existing code.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Reviewed-by: Roger Quadros <rogerq@kernel.org>	# for ti,k3-am654-*
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> # net/brcm,*
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250107125613.211478-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index d1e2bca3c50343f659ba6eff63fdf1ff2148bbbe..798a4c19f18cf9c005293095ecfb0729e2b85d91 100644 (file)
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -166,11 +166,11 @@ unevaluatedProperties: false
 examples:
   - |
     ethmac: ethernet@c9410000 {
-         compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
-         reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
-         interrupts = <8>;
-         interrupt-names = "macirq";
-         clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
-         clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
-         phy-mode = "rgmii";
+        compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+        reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
+        interrupts = <8>;
+        interrupt-names = "macirq";
+        clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
+        clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+        phy-mode = "rgmii";
     };

diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
index 768504ccbf74179c6be86a4d5c2f84650afaefdd..03341b7438d563acdc147d570cc3617b5b2534e5 100644 (file)
--- a/Documentation/devicetree/bindings/net/asix,ax88178.yaml
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -63,8 +63,8 @@ examples:
             #size-cells = <0>;
 
             ethernet@1 {
-               compatible = "usbb95,772b";
-               reg = <1>;
+                compatible = "usbb95,772b";
+                reg = <1>;
             };
         };
     };

diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 7c90a43905319b9ec48914add537f6eea889a7e9..0e3fb4e42e3fb9a79c1bb29fa4fd1c8bab3c264c 100644 (file)
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -85,16 +85,16 @@ examples:
         #size-cells = <1>;
 
         mdio0: mdio@e14 {
-           compatible = "brcm,genet-mdio-v4";
-           #address-cells = <1>;
-           #size-cells = <0>;
-           reg = <0xe14 0x8>;
+            compatible = "brcm,genet-mdio-v4";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0xe14 0x8>;
 
-           phy1: ethernet-phy@1 {
+            phy1: ethernet-phy@1 {
                 max-speed = <1000>;
                 reg = <1>;
                 compatible = "ethernet-phy-ieee802.3-c22";
-           };
+            };
         };
     };
 
@@ -110,10 +110,10 @@ examples:
         interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
 
         mdio1: mdio@e14 {
-           compatible = "brcm,genet-mdio-v4";
-           #address-cells = <1>;
-           #size-cells = <0>;
-           reg = <0xe14 0x8>;
+            compatible = "brcm,genet-mdio-v4";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0xe14 0x8>;
         };
     };
 
@@ -129,15 +129,15 @@ examples:
         interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
 
         mdio2: mdio@e14 {
-           compatible = "brcm,genet-mdio-v4";
-           #address-cells = <1>;
-           #size-cells = <0>;
-           reg = <0xe14 0x8>;
+            compatible = "brcm,genet-mdio-v4";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0xe14 0x8>;
 
-           phy0: ethernet-phy@0 {
+            phy0: ethernet-phy@0 {
                 max-speed = <1000>;
                 reg = <0>;
                 compatible = "ethernet-phy-ieee802.3-c22";
-           };
+            };
         };
     };

diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
index af96b4fd89d5cbf6eb4d91639f4b4cfa466721bb..3f27746d9a5639402a95fd6fe8de3742b9e867c3 100644 (file)
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -38,43 +38,43 @@ unevaluatedProperties: false
 
 examples:
   - |
-    mdio_mux_iproc: mdio-mux@66020000 {
+    mdio-mux@66020000 {
         compatible = "brcm,mdio-mux-iproc";
         reg = <0x66020000 0x250>;
         #address-cells = <1>;
         #size-cells = <0>;
 
         mdio@0 {
-           reg = <0x0>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-
-           pci_phy0: pci-phy@0 {
-              compatible = "brcm,ns2-pcie-phy";
-              reg = <0x0>;
-              #phy-cells = <0>;
-           };
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pci-phy@0 {
+                compatible = "brcm,ns2-pcie-phy";
+                reg = <0x0>;
+                #phy-cells = <0>;
+            };
         };
 
         mdio@7 {
-           reg = <0x7>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-
-           pci_phy1: pci-phy@0 {
-              compatible = "brcm,ns2-pcie-phy";
-              reg = <0x0>;
-              #phy-cells = <0>;
-           };
+            reg = <0x7>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pci-phy@0 {
+                compatible = "brcm,ns2-pcie-phy";
+                reg = <0x0>;
+                #phy-cells = <0>;
+            };
         };
 
         mdio@10 {
-           reg = <0x10>;
-           #address-cells = <1>;
-           #size-cells = <0>;
+            reg = <0x10>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-           gphy0: eth-phy@10 {
-              reg = <0x10>;
-           };
+            eth-phy@10 {
+                reg = <0x10>;
+            };
         };
     };

diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
index 4d7d67ee175a3f0a2b4b12aca8fd13020a1c593e..ff1b59a0294ef6f7d8f11d6a690df8e1db8d6242 100644 (file)
--- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -99,11 +99,11 @@ examples:
     #include <dt-bindings/reset/altr,rst-mgr.h>
 
     can@ffc00000 {
-       compatible = "bosch,d_can";
-       reg = <0xffc00000 0x1000>;
-       interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
-       clocks = <&can0_clk>;
-       resets = <&rst CAN0_RESET>;
+        compatible = "bosch,d_can";
+        reg = <0xffc00000 0x1000>;
+        interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+        clocks = <&can0_clk>;
+        resets = <&rst CAN0_RESET>;
     };
   - |
     can@0 {

diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
index db446dde6842042e678522e535ee424a8af0df65..e0ec53bc10c6f9608892cfadc0bade5cdb8f2672 100644 (file)
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml
@@ -56,15 +56,15 @@ examples:
         #size-cells = <0>;
 
         can@1 {
-             compatible = "microchip,mcp2515";
-             reg = <1>;
-             clocks = <&clk24m>;
-             interrupt-parent = <&gpio4>;
-             interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
-             vdd-supply = <&reg5v0>;
-             xceiver-supply = <&reg5v0>;
-             gpio-controller;
-             #gpio-cells = <2>;
+            compatible = "microchip,mcp2515";
+            reg = <1>;
+            clocks = <&clk24m>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+            gpio-controller;
+            #gpio-cells = <2>;
         };
     };
 

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index bf23838fe6e8bdfcd936868ff83adaeb5f69cd52..85cea9966a27e9a401a8724e32e577a3f48f1076 100644 (file)
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -154,56 +154,56 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     //Example 1
-     ethernet0: ethernet@5800a000 {
-           compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
-           reg = <0x5800a000 0x2000>;
-           reg-names = "stmmaceth";
-           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "macirq";
-           clock-names = "stmmaceth",
-                     "mac-clk-tx",
-                     "mac-clk-rx",
-                     "ethstp",
-                     "eth-ck";
-           clocks = <&rcc ETHMAC>,
-                <&rcc ETHTX>,
-                <&rcc ETHRX>,
-                <&rcc ETHSTP>,
-                <&rcc ETHCK_K>;
-           st,syscon = <&syscfg 0x4>;
-           snps,pbl = <2>;
-           snps,axi-config = <&stmmac_axi_config_0>;
-           snps,tso;
-           phy-mode = "rgmii";
-       };
+    ethernet0: ethernet@5800a000 {
+        compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+        reg = <0x5800a000 0x2000>;
+        reg-names = "stmmaceth";
+        interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        clock-names = "stmmaceth",
+                      "mac-clk-tx",
+                      "mac-clk-rx",
+                      "ethstp",
+                      "eth-ck";
+        clocks = <&rcc ETHMAC>,
+                 <&rcc ETHTX>,
+                 <&rcc ETHRX>,
+                 <&rcc ETHSTP>,
+                 <&rcc ETHCK_K>;
+        st,syscon = <&syscfg 0x4>;
+        snps,pbl = <2>;
+        snps,axi-config = <&stmmac_axi_config_0>;
+        snps,tso;
+        phy-mode = "rgmii";
+    };
 
   - |
     //Example 2 (MCU example)
-     ethernet1: ethernet@40028000 {
-           compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
-           reg = <0x40028000 0x8000>;
-           reg-names = "stmmaceth";
-           interrupts = <0 61 0>, <0 62 0>;
-           interrupt-names = "macirq", "eth_wake_irq";
-           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
-           clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
-           st,syscon = <&syscfg 0x4>;
-           snps,pbl = <8>;
-           snps,mixed-burst;
-           phy-mode = "mii";
-       };
+    ethernet1: ethernet@40028000 {
+        compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+        reg = <0x40028000 0x8000>;
+        reg-names = "stmmaceth";
+        interrupts = <0 61 0>, <0 62 0>;
+        interrupt-names = "macirq", "eth_wake_irq";
+        clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+        clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+        st,syscon = <&syscfg 0x4>;
+        snps,pbl = <8>;
+        snps,mixed-burst;
+        phy-mode = "mii";
+    };
 
   - |
     //Example 3
-     ethernet2: ethernet@40027000 {
-           compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
-           reg = <0x40028000 0x8000>;
-           reg-names = "stmmaceth";
-           interrupts = <61>;
-           interrupt-names = "macirq";
-           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
-           clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
-           st,syscon = <&syscfg 0x4>;
-           snps,pbl = <8>;
-           phy-mode = "mii";
-       };
+    ethernet2: ethernet@40027000 {
+        compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+        reg = <0x40028000 0x8000>;
+        reg-names = "stmmaceth";
+        interrupts = <61>;
+        interrupt-names = "macirq";
+        clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+        clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+        st,syscon = <&syscfg 0x4>;
+        snps,pbl = <8>;
+        phy-mode = "mii";
+    };

diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 53604fab0b73213d41d3c500af5e41c8093a483e..08119b6880ee875de9def7a5d69852de37a4b483 100644 (file)
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -72,9 +72,9 @@ unevaluatedProperties: false
 examples:
   - |
     davinci_mdio: mdio@4a101000 {
-         compatible = "ti,davinci_mdio";
-         #address-cells = <1>;
-         #size-cells = <0>;
-         reg = <0x4a101000 0x1000>;
-         bus_freq = <1000000>;
+        compatible = "ti,davinci_mdio";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x4a101000 0x1000>;
+        bus_freq = <1000000>;
     };

diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 02b6d32003cc1c29f22918f06e138ceae81aef49..b11894fbaec47b63f05b0e2442004d0328730dd5 100644 (file)
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -302,16 +302,16 @@ examples:
                     ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
                 };
             };
-        };
 
-        cpts@3d000 {
-             compatible = "ti,am65-cpts";
-             reg = <0x0 0x3d000 0x0 0x400>;
-             clocks = <&k3_clks 18 2>;
-             clock-names = "cpts";
-             interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
-             interrupt-names = "cpts";
-             ti,cpts-ext-ts-inputs = <4>;
-             ti,cpts-periodic-outputs = <2>;
+            cpts@3d000 {
+                compatible = "ti,am65-cpts";
+                reg = <0x0 0x3d000 0x0 0x400>;
+                clocks = <&k3_clks 18 2>;
+                clock-names = "cpts";
+                interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "cpts";
+                ti,cpts-ext-ts-inputs = <4>;
+                ti,cpts-periodic-outputs = <2>;
+            };
         };
     };

diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 3888692275ad49ff4c0bfa1da84c6e66b8040f5b..3572749147fb6a94ecb6fd75d52713df714e8b23 100644 (file)
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -131,23 +131,23 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     cpts@310d0000 {
-         compatible = "ti,am65-cpts";
-         reg = <0x310d0000 0x400>;
-         reg-names = "cpts";
-         clocks = <&main_cpts_mux>;
-         clock-names = "cpts";
-         interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
-         interrupt-names = "cpts";
-         ti,cpts-periodic-outputs = <6>;
-         ti,cpts-ext-ts-inputs = <8>;
-
-         main_cpts_mux: refclk-mux {
-               #clock-cells = <0>;
-               clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
-                        <&k3_clks 157 91>, <&k3_clks 157 77>,
-                        <&k3_clks 157 102>, <&k3_clks 157 80>,
-                        <&k3_clks 120 3>, <&k3_clks 121 3>;
-               assigned-clocks = <&main_cpts_mux>;
-               assigned-clock-parents = <&k3_clks 118 11>;
-         };
+        compatible = "ti,am65-cpts";
+        reg = <0x310d0000 0x400>;
+        reg-names = "cpts";
+        clocks = <&main_cpts_mux>;
+        clock-names = "cpts";
+        interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cpts";
+        ti,cpts-periodic-outputs = <6>;
+        ti,cpts-ext-ts-inputs = <8>;
+
+        main_cpts_mux: refclk-mux {
+            #clock-cells = <0>;
+            clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+                     <&k3_clks 157 91>, <&k3_clks 157 77>,
+                     <&k3_clks 157 102>, <&k3_clks 157 80>,
+                     <&k3_clks 120 3>, <&k3_clks 121 3>;
+            assigned-clocks = <&main_cpts_mux>;
+            assigned-clock-parents = <&k3_clks 118 11>;
+        };
     };

diff --git a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
index 1715b22e0dcf8996f9905daf19e509ce3f3a56ed..930b700b73d007e1a36943d46534cfe878dafe65 100644 (file)
--- a/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/marvell,sd8787.yaml
@@ -79,15 +79,14 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     mmc {
-         #address-cells = <1>;
-         #size-cells = <0>;
-
-         wifi@1 {
-             compatible = "marvell,sd8897";
-             reg = <1>;
-             interrupt-parent = <&pio>;
-             interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
-             marvell,wakeup-pin = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "marvell,sd8897";
+            reg = <1>;
+            interrupt-parent = <&pio>;
+            interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+            marvell,wakeup-pin = <3>;
         };
     };
-