staging:iio-trig-periodic-rtc: Allow to reset frequency to 0

periodic rtc trigger initially has frequency 0

it is possible to change trigger frequency on-the-fly, but it is not
possible to set frequency back to 0

this patch allows to set trigger frequency to 0, thereby disabling
the rtc interrupt

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
index 362a54a16e5816e49fd425d11db7ff7b8e307c28..b5108a163e378725c7b3b6b3b92274cb38218ae2 100644 (file)
--- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
+++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
@@ -26,16 +26,22 @@ struct iio_prtc_trigger_info {
        struct rtc_device *rtc;
        int frequency;
        struct rtc_task task;
+       bool state;
 };
 
 static int iio_trig_periodic_rtc_set_state(struct iio_trigger *trig, bool state)
 {
        struct iio_prtc_trigger_info *trig_info = iio_trigger_get_drvdata(trig);
-       if (trig_info->frequency == 0)
+       int ret;
+       if (trig_info->frequency == 0 && state)
                return -EINVAL;
        dev_dbg(&trig_info->rtc->dev, "trigger frequency is %d\n",
                        trig_info->frequency);
-       return rtc_irq_set_state(trig_info->rtc, &trig_info->task, state);
+       ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, state);
+       if (ret == 0)
+               trig_info->state = state;
+
+       return ret;
 }
 
 static ssize_t iio_trig_periodic_read_freq(struct device *dev,
@@ -61,7 +67,14 @@ static ssize_t iio_trig_periodic_write_freq(struct device *dev,
        if (ret)
                goto error_ret;
 
-       ret = rtc_irq_set_freq(trig_info->rtc, &trig_info->task, val);
+       if (val > 0) {
+               ret = rtc_irq_set_freq(trig_info->rtc, &trig_info->task, val);
+               if (ret == 0 && trig_info->state && trig_info->frequency == 0)
+                       ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, 1);
+       } else if (val == 0) {
+               ret = rtc_irq_set_state(trig_info->rtc, &trig_info->task, 0);
+       } else
+               ret = -EINVAL;
        if (ret)
                goto error_ret;