rtc: ab-b5ze-s3: correct checkpatch issues

Correct trivial whitespace and split strings issues.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/drivers/rtc/rtc-ab-b5ze-s3.c b/drivers/rtc/rtc-ab-b5ze-s3.c
index ef895ae431c1bfb8e57224f8195cf127d41fb273..cdad6f00debffe315193496a476fbce55509c116 100644 (file)
--- a/drivers/rtc/rtc-ab-b5ze-s3.c
+++ b/drivers/rtc/rtc-ab-b5ze-s3.c
@@ -468,8 +468,8 @@ static int _abb5zes3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
                alarm_secs = rtc_tm_to_time64(alarm_tm);
 
                if (alarm_secs > rtc_secs) {
-                       dev_err(dev, "%s: alarm maximum is one month in the "
-                               "future (%d)\n", __func__, ret);
+                       dev_err(dev, "%s: alarm maximum is one month in the future (%d)\n",
+                               __func__, ret);
                        return -EINVAL;
                }
        }
@@ -621,8 +621,9 @@ static int abb5zes3_rtc_check_setup(struct device *dev)
                ABB5ZES3_REG_TIM_CLK_COF1 | ABB5ZES3_REG_TIM_CLK_COF2 |
                ABB5ZES3_REG_TIM_CLK_TBM | ABB5ZES3_REG_TIM_CLK_TAM);
        ret = regmap_update_bits(regmap, ABB5ZES3_REG_TIM_CLK, mask,
-               ABB5ZES3_REG_TIM_CLK_COF0 | ABB5ZES3_REG_TIM_CLK_COF1 |
-               ABB5ZES3_REG_TIM_CLK_COF2);
+                                ABB5ZES3_REG_TIM_CLK_COF0 |
+                                ABB5ZES3_REG_TIM_CLK_COF1 |
+                                ABB5ZES3_REG_TIM_CLK_COF2);
        if (ret < 0) {
                dev_err(dev, "%s: unable to initialize clkout register (%d)\n",
                        __func__, ret);
@@ -675,9 +676,9 @@ static int abb5zes3_rtc_check_setup(struct device *dev)
         * switchover flag but not battery low flag. The latter is checked
         * later below.
         */
-       mask = (ABB5ZES3_REG_CTRL3_PM0 | ABB5ZES3_REG_CTRL3_PM1 |
-               ABB5ZES3_REG_CTRL3_PM2 | ABB5ZES3_REG_CTRL3_BLIE |
-               ABB5ZES3_REG_CTRL3_BSIE| ABB5ZES3_REG_CTRL3_BSF);
+       mask = (ABB5ZES3_REG_CTRL3_PM0  | ABB5ZES3_REG_CTRL3_PM1 |
+               ABB5ZES3_REG_CTRL3_PM2  | ABB5ZES3_REG_CTRL3_BLIE |
+               ABB5ZES3_REG_CTRL3_BSIE | ABB5ZES3_REG_CTRL3_BSF);
        ret = regmap_update_bits(regmap, ABB5ZES3_REG_CTRL3, mask, 0);
        if (ret < 0) {
                dev_err(dev, "%s: unable to initialize CTRL3 register (%d)\n",
@@ -694,10 +695,8 @@ static int abb5zes3_rtc_check_setup(struct device *dev)
        }
 
        if (reg & ABB5ZES3_REG_RTC_SC_OSC) {
-               dev_err(dev, "clock integrity not guaranteed. Osc. has stopped "
-                       "or has been interrupted.\n");
-               dev_err(dev, "change battery (if not already done) and  "
-                       "then set time to reset osc. failure flag.\n");
+               dev_err(dev, "clock integrity not guaranteed. Osc. has stopped or has been interrupted.\n");
+               dev_err(dev, "change battery (if not already done) and then set time to reset osc. failure flag.\n");
        }
 
        /*
@@ -715,13 +714,12 @@ static int abb5zes3_rtc_check_setup(struct device *dev)
 
        data->battery_low = reg & ABB5ZES3_REG_CTRL3_BLF;
        if (data->battery_low) {
-               dev_err(dev, "RTC battery is low; please, consider "
-                       "changing it!\n");
+               dev_err(dev, "RTC battery is low; please, consider changing it!\n");
 
                ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, false);
                if (ret)
-                       dev_err(dev, "%s: disabling battery low interrupt "
-                               "generation failed (%d)\n", __func__, ret);
+                       dev_err(dev, "%s: disabling battery low interrupt generation failed (%d)\n",
+                               __func__, ret);
        }
 
        return ret;
@@ -866,7 +864,7 @@ static int abb5zes3_probe(struct i2c_client *client,
        if (client->irq > 0) {
                ret = devm_request_threaded_irq(dev, client->irq, NULL,
                                                _abb5zes3_rtc_interrupt,
-                                               IRQF_SHARED|IRQF_ONESHOT,
+                                               IRQF_SHARED | IRQF_ONESHOT,
                                                DRV_NAME, client);
                if (!ret) {
                        device_init_wakeup(dev, true);
@@ -888,8 +886,8 @@ static int abb5zes3_probe(struct i2c_client *client,
        if (!data->battery_low && data->irq) {
                ret = _abb5zes3_rtc_battery_low_irq_enable(regmap, true);
                if (ret) {
-                       dev_err(dev, "%s: enabling battery low interrupt "
-                               "generation failed (%d)\n", __func__, ret);
+                       dev_err(dev, "%s: enabling battery low interrupt generation failed (%d)\n",
+                               __func__, ret);
                        goto err;
                }
        }