mmc: tmio: Extract bus_width modifications to a separate function

Move code for bus_width modification, out of the ->set_ios() callback
and into a separate function, to simplify code.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index d63d292933b439bab5744f006cce7ea362ea1832..8f5b5ccc7a5f8ab75f03b5d2856cac0249ea52b3 100644 (file)
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -831,6 +831,19 @@ static void tmio_mmc_power_off(struct tmio_mmc_host *host)
                host->set_pwr(host->pdev, 0);
 }
 
+static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host,
+                               unsigned char bus_width)
+{
+       switch (bus_width) {
+       case MMC_BUS_WIDTH_1:
+               sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
+               break;
+       case MMC_BUS_WIDTH_4:
+               sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
+               break;
+       }
+}
+
 /* Set MMC clock / power.
  * Note: This controller uses a simple divider scheme therefore it cannot
  * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
@@ -914,16 +927,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                }
        }
 
-       if (host->power != TMIO_MMC_OFF_STOP) {
-               switch (ios->bus_width) {
-               case MMC_BUS_WIDTH_1:
-                       sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0);
-               break;
-               case MMC_BUS_WIDTH_4:
-                       sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0);
-               break;
-               }
-       }
+       if (host->power != TMIO_MMC_OFF_STOP)
+               tmio_mmc_set_bus_width(host, ios->bus_width);
 
        /* Let things settle. delay taken from winCE driver */
        udelay(140);