ASoC: omap-mcbsp: Use different method for DMA request when booted with DT

The DMA resource no longer available via this API when booting with DT.
When the board is booted with DT do not use platform_get_resource_byname(),
instead set the dma_data.filter_data to the name of the DMA channel and omap-pcm
can use this name to request the DMA channel.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/sound/soc/omap/mcbsp.c b/sound/soc/omap/mcbsp.c
index eb68c7db1cf3999cedcf8c8e0b515cb864dc1336..361e4c03646e32a9b73d76122a13e3e071c7a9b0 100644 (file)
--- a/sound/soc/omap/mcbsp.c
+++ b/sound/soc/omap/mcbsp.c
@@ -1012,28 +1012,33 @@ int omap_mcbsp_init(struct platform_device *pdev)
                }
        }
 
-       res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
-       if (!res) {
-               dev_err(&pdev->dev, "invalid rx DMA channel\n");
-               return -ENODEV;
-       }
-       /* RX DMA request number, and port address configuration */
-       mcbsp->dma_req[1] = res->start;
-       mcbsp->dma_data[1].filter_data = &mcbsp->dma_req[1];
-       mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp, 1);
-       mcbsp->dma_data[1].maxburst = 4;
+       if (!pdev->dev.of_node) {
+               res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
+               if (!res) {
+                       dev_err(&pdev->dev, "invalid tx DMA channel\n");
+                       return -ENODEV;
+               }
+               mcbsp->dma_req[0] = res->start;
+               mcbsp->dma_data[0].filter_data = &mcbsp->dma_req[0];
 
-       res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
-       if (!res) {
-               dev_err(&pdev->dev, "invalid tx DMA channel\n");
-               return -ENODEV;
+               res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
+               if (!res) {
+                       dev_err(&pdev->dev, "invalid rx DMA channel\n");
+                       return -ENODEV;
+               }
+               mcbsp->dma_req[1] = res->start;
+               mcbsp->dma_data[1].filter_data = &mcbsp->dma_req[1];
+       } else {
+               mcbsp->dma_data[0].filter_data = "tx";
+               mcbsp->dma_data[1].filter_data = "rx";
        }
-       /* TX DMA request number, and port address configuration */
-       mcbsp->dma_req[0] = res->start;
-       mcbsp->dma_data[0].filter_data = &mcbsp->dma_req[0];
+
        mcbsp->dma_data[0].addr = omap_mcbsp_dma_reg_params(mcbsp, 0);
        mcbsp->dma_data[0].maxburst = 4;
 
+       mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp, 1);
+       mcbsp->dma_data[1].maxburst = 4;
+
        mcbsp->fclk = clk_get(&pdev->dev, "fck");
        if (IS_ERR(mcbsp->fclk)) {
                ret = PTR_ERR(mcbsp->fclk);