arm64: dts: freescale: imx93-phyboard-segin: Disable SD-card write-protect

Add disable-wp flag (write-protect) to usdhc2 node (SD-card) to get rid
of the following kernel boot warning:

  host does not support reading read-only switch, assuming write-enable

Micro SD cards can't be physically write-protected like full-sized
cards anyways.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index 902b523fc92cfe5756465be7b2d50bbd4b9ce8ff..3d5cd0561362b4b6bf897f9beb69ff2df7f459e1 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -48,6 +48,7 @@
        pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
        bus-width = <4>;
        cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+       disable-wp;
        no-mmc;
        no-sdio;
        vmmc-supply = <&reg_usdhc2_vmmc>;