dt/bindings: gpio: add compatible string for marvell,pxa1928-gpio

Add a new compatible string for PXA1928 GPIO controller. The IP block is
same as prior chips with a 6th bank added.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index b2afdb27adeb3d5786a7f5e31d22bdb80e10affa..67a2e4e414a5eb93409807b9e837cda236abd977 100644 (file)
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -3,8 +3,8 @@
 Required properties:
 - compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
                "intel,pxa27x-gpio", "intel,pxa3xx-gpio",
-               "marvell,pxa93x-gpio", "marvell,mmp-gpio" or
-               "marvell,mmp2-gpio".
+               "marvell,pxa93x-gpio", "marvell,mmp-gpio",
+               "marvell,mmp2-gpio" or marvell,pxa1928-gpio.
 - reg : Address and length of the register set for the device
 - interrupts : Should be the port interrupt shared by all gpio pins.
   There're three gpio interrupts in arch-pxa, and they're gpio0,