ARM: dts: stm32: enable USB OTG HS on stm32h743i-eval

This patch enables USB HS on stm32h743i-eval in OTG (DRD) mode.
The USB connector used will determine the role of USB OTG controller.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index ee5202d88b2f4a33db4b1e377561c7652066c0ac..0f15dfb98381d8ce9d957e4fa838a6bcdd0e98ab 100644 (file)
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -188,6 +188,26 @@
                                        bias-disable;
                                };
                        };
+
+                       usbotg_hs_pins_a: usbotg-hs@0 {
+                               pins {
+                                       pinmux = <STM32_PINMUX('H', 4, AF10)>,  /* ULPI_NXT */
+                                                        <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+                                                        <STM32_PINMUX('C', 0, AF10)>,  /* ULPI_STP> */
+                                                        <STM32_PINMUX('A', 5, AF10)>,  /* ULPI_CK> */
+                                                        <STM32_PINMUX('A', 3, AF10)>,  /* ULPI_D0> */
+                                                        <STM32_PINMUX('B', 0, AF10)>,  /* ULPI_D1> */
+                                                        <STM32_PINMUX('B', 1, AF10)>,  /* ULPI_D2> */
+                                                        <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+                                                        <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+                                                        <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+                                                        <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+                                                        <STM32_PINMUX('B', 5, AF10)>;  /* ULPI_D7> */
+                                       bias-disable;
+                                       drive-push-pull;
+                                       slew-rate = <2>;
+                               };
+                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 9f0e72c67219adba7a2f9d47ed69d596539420ac..1c615f68c774f8424a4163c7bfe6fa0d0d1e08d2 100644 (file)
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -68,6 +68,14 @@
                regulator-max-microvolt = <3300000>;
                regulator-always-on;
        };
+
+       usbotg_hs_phy: usb-phy {
+               #phy-cells = <0>;
+               compatible = "usb-nop-xceiv";
+               clocks = <&rcc USB1ULPI_CK>;
+               clock-names = "main_clk";
+       };
+
 };
 
 &adc_12 {
@@ -90,3 +98,11 @@
        status = "okay";
 };
 
+&usbotg_hs {
+       pinctrl-0 = <&usbotg_hs_pins_a>;
+       pinctrl-names = "default";
+       phys = <&usbotg_hs_phy>;
+       phy-names = "usb2-phy";
+       dr_mode = "otg";
+       status = "okay";
+};