hwmon: (nct6775) Move config variable declarations and initializations

Group configuration variable declarations and initialization together.
While this results in reading more registers than necessary for a given
chip, it improves code readability and simplifies extending the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index bd1c4772994aa932ea826db20ee7c3216f198fb8..aa8a44608ca3e62f384165efe128da9035f7f8ca 100644 (file)
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -3436,8 +3436,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
        bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
        bool pwm6pin = false, pwm7pin = false;
        int sioreg = data->sioreg;
-       int cr24;
-       int cr2c;
 
        /* Store SIO_REG_ENABLE for use during resume */
        superio_select(sioreg, NCT6775_LD_HWM);
@@ -3445,7 +3443,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
 
        /* fan4 and fan5 share some pins with the GPIO and serial flash */
        if (data->kind == nct6775) {
-               cr2c = superio_inb(sioreg, 0x2c);
+               int cr2c = superio_inb(sioreg, 0x2c);
 
                fan3pin = cr2c & BIT(6);
                pwm3pin = cr2c & BIT(7);
@@ -3493,17 +3491,20 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
                fan4min = fan4pin;
                pwm3pin = fan3pin;
        } else if (data->kind == nct6106) {
-               cr24 = superio_inb(sioreg, 0x24);
+               int cr24 = superio_inb(sioreg, 0x24);
+
                fan3pin = !(cr24 & 0x80);
                pwm3pin = cr24 & 0x08;
        } else {
                /* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D */
-               int cr1b, cr2a, cr2f;
-               int cr1c;
-               int cr2d;
-               bool dsw_en;
-
-               cr1c = superio_inb(sioreg, 0x1c);
+               int cr1b = superio_inb(sioreg, 0x1b);
+               int cr1c = superio_inb(sioreg, 0x1c);
+               int cr1d = superio_inb(sioreg, 0x1d);
+               int cr2a = superio_inb(sioreg, 0x2a);
+               int cr2b = superio_inb(sioreg, 0x2b);
+               int cr2d = superio_inb(sioreg, 0x2d);
+               int cr2f = superio_inb(sioreg, 0x2f);
+               bool dsw_en = cr2f & BIT(3);
 
                fan3pin = !(cr1c & BIT(5));
                fan4pin = !(cr1c & BIT(6));
@@ -3513,7 +3514,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
                pwm4pin = !(cr1c & BIT(1));
                pwm5pin = !(cr1c & BIT(2));
 
-               cr2d = superio_inb(sioreg, 0x2d);
                switch (data->kind) {
                case nct6791:
                case nct6792:
@@ -3523,11 +3523,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
                case nct6793:
                case nct6795:
                case nct6796:
-                       cr1b = superio_inb(sioreg, 0x1b);
-                       cr2a = superio_inb(sioreg, 0x2a);
-                       cr2f = superio_inb(sioreg, 0x2f);
-                       dsw_en = cr2f & BIT(3);
-
                        if (!pwm5pin)
                                pwm5pin = cr2d & BIT(7);
 
@@ -3566,9 +3561,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
                        }
 
                        if (data->kind == nct6796) {
-                               int cr1d = superio_inb(sioreg, 0x1d);
-                               int cr2b = superio_inb(sioreg, 0x2b);
-
                                fan7pin = !(cr2b & BIT(2));
                                pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
                        }