amd64_edac: Add support for interleaved region swapping

On revC3 and revE Fam10h machines and later, non-interleaved graphics
framebuffer memory under the 16G mark can be swapped with a region
located at the bottom of memory so that the GPU can use the interleaved
region and thus two channels. Add support for that.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 7a7bd7785ed40ba2d078354ba16d17d722cf5e88..9ea1bb4a51e3ceee34ff68a1ea3bd8e9f2378df3 100644 (file)
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -1331,6 +1331,42 @@ static int f10_lookup_addr_in_dct(u64 in_addr, u32 nid, u8 dct)
        return cs_found;
 }
 
+/*
+ * See F2x10C. Non-interleaved graphics framebuffer memory under the 16G is
+ * swapped with a region located at the bottom of memory so that the GPU can use
+ * the interleaved region and thus two channels.
+ */
+static u64 f10_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr)
+{
+       u32 swap_reg, swap_base, swap_limit, rgn_size, tmp_addr;
+
+       if (boot_cpu_data.x86 == 0x10) {
+               /* only revC3 and revE have that feature */
+               if (boot_cpu_data.x86_model < 4 ||
+                   (boot_cpu_data.x86_model < 0xa &&
+                    boot_cpu_data.x86_mask < 3))
+                       return sys_addr;
+       }
+
+       amd64_read_dct_pci_cfg(pvt, SWAP_INTLV_REG, &swap_reg);
+
+       if (!(swap_reg & 0x1))
+               return sys_addr;
+
+       swap_base       = (swap_reg >> 3) & 0x7f;
+       swap_limit      = (swap_reg >> 11) & 0x7f;
+       rgn_size        = (swap_reg >> 20) & 0x7f;
+       tmp_addr        = sys_addr >> 27;
+
+       if (!(sys_addr >> 34) &&
+           (((tmp_addr >= swap_base) &&
+            (tmp_addr <= swap_limit)) ||
+            (tmp_addr < rgn_size)))
+               return sys_addr ^ (u64)swap_base << 27;
+
+       return sys_addr;
+}
+
 /* For a given @dram_range, check if @sys_addr falls within it. */
 static int f10_match_to_this_node(struct amd64_pvt *pvt, int range,
                                  u64 sys_addr, int *nid, int *chan_sel)
@@ -1352,6 +1388,8 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int range,
            (intlv_sel != ((sys_addr >> 12) & intlv_en)))
                return -EINVAL;
 
+       sys_addr = f10_swap_interleaved_region(pvt, sys_addr);
+
        dct_sel_base = dct_sel_baseaddr(pvt);
 
        /*

diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 6ae8aa8cc1783e2b1fe355f032d4baa54527095c..85e3acbc087a7e6c26c196ff3045f89881b194fd 100644 (file)
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -239,6 +239,8 @@
 #define dct_dram_enabled(pvt)          ((pvt)->dct_sel_lo & BIT(8))
 #define dct_memory_cleared(pvt)                ((pvt)->dct_sel_lo & BIT(10))
 
+#define SWAP_INTLV_REG                 0x10c
+
 #define DCT_SEL_HI                     0x114
 
 /*