The ia64 sn2 platform is one example of a platform
        that uses this interface.
 
-8) void lazy_mmu_prot_update(pte_t pte)
-       This interface is called whenever the protection on
-       any user PTEs change.  This interface provides a notification
-       to architecture specific code to take appropriate action.
-
-
 Next, we have the cache flushing interfaces.  In general, when Linux
 is changing an existing virtual-->physical mapping to a new value,
 the sequence will be in one of the following forms:
 
 EXPORT_SYMBOL(zero_page_memmap_ptr);
 
 void
-lazy_mmu_prot_update (pte_t pte)
+__ia64_sync_icache_dcache (pte_t pte)
 {
        unsigned long addr;
        struct page *page;
        unsigned long order;
 
-       if (!pte_exec(pte))
-               return;                         /* not an executable page... */
-
        page = pte_page(pte);
        addr = (unsigned long) page_address(page);
 
 
 #define pgd_offset_gate(mm, addr)      pgd_offset(mm, addr)
 #endif
 
-#ifndef __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
-#define lazy_mmu_prot_update(pte)      do { } while (0)
-#endif
-
 #ifndef __HAVE_ARCH_MOVE_PTE
 #define move_pte(pte, prot, old_addr, new_addr)        (pte)
 #endif
 
  * page table.
  */
 
-/*
- * On some architectures, special things need to be done when setting
- * the PTE in a page table.  Nothing special needs to be on IA-64.
- */
-#define set_pte(ptep, pteval)  (*(ptep) = (pteval))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 #define VMALLOC_START          (RGN_BASE(RGN_GATE) + 0x200000000UL)
 #ifdef CONFIG_VIRTUAL_MEM_MAP
 #define pte_mkdirty(pte)       (__pte(pte_val(pte) | _PAGE_D))
 #define pte_mkhuge(pte)                (__pte(pte_val(pte)))
 
+/*
+ * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to
+ * sync icache and dcache when we insert *new* executable page.
+ *  __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache
+ * if necessary.
+ *
+ *  set_pte() is also called by the kernel, but we can expect that the kernel
+ *  flushes icache explicitly if necessary.
+ */
+#define pte_present_exec_user(pte)\
+       ((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \
+               (_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX))
+
+extern void __ia64_sync_icache_dcache(pte_t pteval);
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+       /* page is present && page is user  && page is executable
+        * && (page swapin or new page or page migraton
+        *      || copy_on_write with page copying.)
+        */
+       if (pte_present_exec_user(pteval) &&
+           (!pte_present(*ptep) ||
+               pte_pfn(*ptep) != pte_pfn(pteval)))
+               /* load_module() calles flush_icache_range() explicitly*/
+               __ia64_sync_icache_dcache(pteval);
+       *ptep = pteval;
+}
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
 /*
  * Make page protection values cacheable, uncacheable, or write-
  * combining.  Note that "protection" is really a misnomer here as the
 #define HUGETLB_PGDIR_MASK     (~(HUGETLB_PGDIR_SIZE-1))
 #endif
 
-/*
- * IA-64 doesn't have any external MMU info: the page tables contain all the necessary
- * information.  However, we use this routine to take care of any (delayed) i-cache
- * flushing that may be necessary.
- */
-extern void lazy_mmu_prot_update (pte_t pte);
 
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 /*
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 #define __HAVE_ARCH_PTE_SAME
 #define __HAVE_ARCH_PGD_OFFSET_GATE
-#define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+
 
 #ifndef CONFIG_PGTABLE_4
 #include <asm-generic/pgtable-nopud.h>
 
        entry = pte_mkwrite(pte_mkdirty(*ptep));
        if (ptep_set_access_flags(vma, address, ptep, entry, 1)) {
                update_mmu_cache(vma, address, entry);
-               lazy_mmu_prot_update(entry);
        }
 }
 
                        pte = huge_ptep_get_and_clear(mm, address, ptep);
                        pte = pte_mkhuge(pte_modify(pte, newprot));
                        set_huge_pte_at(mm, address, ptep, pte);
-                       lazy_mmu_prot_update(pte);
                }
        }
        spin_unlock(&mm->page_table_lock);
 
                flush_cache_page(vma, address, pte_pfn(orig_pte));
                entry = pte_mkyoung(orig_pte);
                entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-               if (ptep_set_access_flags(vma, address, page_table, entry,1)) {
+               if (ptep_set_access_flags(vma, address, page_table, entry,1))
                        update_mmu_cache(vma, address, entry);
-                       lazy_mmu_prot_update(entry);
-               }
                ret |= VM_FAULT_WRITE;
                goto unlock;
        }
                flush_cache_page(vma, address, pte_pfn(orig_pte));
                entry = mk_pte(new_page, vma->vm_page_prot);
                entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-               lazy_mmu_prot_update(entry);
                /*
                 * Clear the pte entry and flush it first, before updating the
                 * pte with the new entry. This will avoid a race condition
 
        /* No need to invalidate - it was non-present before */
        update_mmu_cache(vma, address, entry);
-       lazy_mmu_prot_update(entry);
 unlock:
        pte_unmap_unlock(page_table, ptl);
        return 0;
 
                /* no need to invalidate: a not-present page won't be cached */
                update_mmu_cache(vma, address, entry);
-               lazy_mmu_prot_update(entry);
        } else {
                if (anon)
                        page_cache_release(page);
        entry = pte_mkyoung(entry);
        if (ptep_set_access_flags(vma, address, pte, entry, write_access)) {
                update_mmu_cache(vma, address, entry);
-               lazy_mmu_prot_update(entry);
        } else {
                /*
                 * This is needed only for protection faults but the arch code
 
 
        /* No need to invalidate - it was non-present before */
        update_mmu_cache(vma, addr, pte);
-       lazy_mmu_prot_update(pte);
 
 out:
        pte_unmap_unlock(ptep, ptl);
 
                        if (dirty_accountable && pte_dirty(ptent))
                                ptent = pte_mkwrite(ptent);
                        set_pte_at(mm, addr, pte, ptent);
-                       lazy_mmu_prot_update(ptent);
 #ifdef CONFIG_MIGRATION
                } else if (!pte_file(oldpte)) {
                        swp_entry_t entry = pte_to_swp_entry(oldpte);
 
                entry = pte_wrprotect(entry);
                entry = pte_mkclean(entry);
                set_pte_at(mm, address, pte, entry);
-               lazy_mmu_prot_update(entry);
                ret = 1;
        }