--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ * http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PERI_CRG_CLK_EN4 0x40
+#define PERI_CRG_CLK_DIS4 0x44
+#define GT_CLK_USB3OTG_REF BIT(0)
+#define GT_ACLK_USB3OTG BIT(1)
+
+#define PERI_CRG_RSTEN4 0x90
+#define PERI_CRG_RSTDIS4 0x94
+#define IP_RST_USB3OTGPHY_POR BIT(3)
+#define IP_RST_USB3OTG BIT(5)
+
+#define PERI_CRG_ISODIS 0x148
+#define USB_REFCLK_ISO_EN BIT(25)
+
+#define PCTRL_PERI_CTRL3 0x10
+#define PCTRL_PERI_CTRL3_MSK_START 16
+#define USB_TCXO_EN BIT(1)
+
+#define PCTRL_PERI_CTRL24 0x64
+#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
+
+#define USBOTG3_CTRL0 0x00
+#define SC_USB3PHY_ABB_GT_EN BIT(15)
+
+#define USBOTG3_CTRL2 0x08
+#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0)
+#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1)
+
+#define USBOTG3_CTRL3 0x0C
+#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6)
+#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5)
+
+#define USBOTG3_CTRL4 0x10
+
+#define USBOTG3_CTRL7 0x1c
+#define REF_SSP_EN BIT(16)
+
+/* This value config the default txtune parameter of the usb 2.0 phy */
+#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3
+
+struct hi3660_priv {
+ struct device *dev;
+ struct regmap *peri_crg;
+ struct regmap *pctrl;
+ struct regmap *otg_bc;
+ u32 eye_diagram_param;
+};
+
+static int hi3660_phy_init(struct phy *phy)
+{
+ struct hi3660_priv *priv = phy_get_drvdata(phy);
+ u32 val, mask;
+ int ret;
+
+ /* usb refclk iso disable */
+ ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
+ if (ret)
+ goto out;
+
+ /* enable usb_tcxo_en */
+ val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+ if (ret)
+ goto out;
+
+ /* assert phy */
+ val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+ ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+ if (ret)
+ goto out;
+
+ /* enable phy ref clk */
+ val = SC_USB3PHY_ABB_GT_EN;
+ mask = val;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
+ if (ret)
+ goto out;
+
+ val = REF_SSP_EN;
+ mask = val;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
+ if (ret)
+ goto out;
+
+ /* exit from IDDQ mode */
+ mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
+ if (ret)
+ goto out;
+
+ /* delay for exit from IDDQ mode */
+ usleep_range(100, 120);
+
+ /* deassert phy */
+ val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
+ ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
+ if (ret)
+ goto out;
+
+ /* delay for phy deasserted */
+ usleep_range(10000, 15000);
+
+ /* fake vbus valid signal */
+ val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
+ mask = val;
+ ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
+ if (ret)
+ goto out;
+
+ /* delay for vbus valid */
+ usleep_range(100, 120);
+
+ ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
+ priv->eye_diagram_param);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
+ return ret;
+}
+
+static int hi3660_phy_exit(struct phy *phy)
+{
+ struct hi3660_priv *priv = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ /* assert phy */
+ val = IP_RST_USB3OTGPHY_POR;
+ ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
+ if (ret)
+ goto out;
+
+ /* disable usb_tcxo_en */
+ val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
+ ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
+ if (ret)
+ goto out;
+
+ return 0;
+out:
+ dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
+ return ret;
+}
+
+static struct phy_ops hi3660_phy_ops = {
+ .init = hi3660_phy_init,
+ .exit = hi3660_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int hi3660_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+ struct hi3660_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pericrg-syscon");
+ if (IS_ERR(priv->peri_crg)) {
+ dev_err(dev, "no hisilicon,pericrg-syscon\n");
+ return PTR_ERR(priv->peri_crg);
+ }
+
+ priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "hisilicon,pctrl-syscon");
+ if (IS_ERR(priv->pctrl)) {
+ dev_err(dev, "no hisilicon,pctrl-syscon\n");
+ return PTR_ERR(priv->pctrl);
+ }
+
+ /* node of hi3660 phy is a sub-node of usb3_otg_bc */
+ priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(priv->otg_bc)) {
+ dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
+ return PTR_ERR(priv->otg_bc);
+ }
+
+ if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
+ &(priv->eye_diagram_param)))
+ priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
+
+ phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_phy_of_match[] = {
+ {.compatible = "hisilicon,hi3660-usb-phy",},
+ { }
+};
+MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
+
+static struct platform_driver hi3660_phy_driver = {
+ .probe = hi3660_phy_probe,
+ .driver = {
+ .name = "hi3660-usb-phy",
+ .of_match_table = hi3660_phy_of_match,
+ }
+};
+module_platform_driver(hi3660_phy_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
projects / users / hch / configfs.git / commitdiff