dt-bindings: pinctrl: at91-pio4: Add push-pull support

Add generic push-pull support for pio4 driver.

Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/048a41d1dcb3da0e845986a73eaac61a54c69269.1684313910.git.Ryan.Wanner@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
index e2b861ce16d81725175eca5a491fdd3a7fbd4888..774c3c269c403e08d1bd0a086b0c7a6bec395bc8 100644 (file)
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -37,7 +37,8 @@ right representation of the pin.
 Optional properties:
 - GENERIC_PINCONFIG: generic pinconfig options to use:
        - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
-         input-schmitt-enable, input-debounce, output-low, output-high.
+        drive-push-pull input-schmitt-enable, input-debounce, output-low,
+        output-high.
        - for microchip,sama7g5-pinctrl only:
                - slew-rate: 0 - disabled, 1 - enabled (default)
 - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for