au1x_dma_chan_t *cp;
/*
- * We do the intialization on the first channel allocation.
+ * We do the initialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
* which can't be done successfully during board set up.
*/
dp->dscr_source1 = dscr->dscr_source1;
dp->dscr_cmd1 = dscr->dscr_cmd1;
nbytes = dscr->dscr_cmd1;
- /* Allow the caller to specifiy if an interrupt is generated */
+ /* Allow the caller to specify if an interrupt is generated */
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
gmx_rx_int_en.s.pause_drp = 1;
/* Skipping gmx_rx_int_en.s.reserved_16_18 */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
/*gmx_rx_int_en.s.phy_spd = 1; */
/*gmx_rx_int_en.s.phy_link = 1; */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
/*gmx_rx_int_en.s.phy_spd = 1; */
/*gmx_rx_int_en.s.phy_link = 1; */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
/*gmx_rx_int_en.s.phy_spd = 1; */
/*gmx_rx_int_en.s.phy_link = 1; */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
/*gmx_rx_int_en.s.phy_spd = 1; */
/*gmx_rx_int_en.s.phy_link = 1; */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
/*gmx_rx_int_en.s.phy_spd = 1; */
/*gmx_rx_int_en.s.phy_link = 1; */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
gmx_rx_int_en.s.pause_drp = 1;
/* Skipping gmx_rx_int_en.s.reserved_16_18 */
/*gmx_rx_int_en.s.ifgerr = 1; */
- /*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+ /*gmx_rx_int_en.s.coldet = 1; // Collision detect */
/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
/*
* Set the size of the PKO command buffers to an odd number of
* 64bit words. This allows the normal two word send to stay
- * aligned and never span a comamnd word buffer.
+ * aligned and never span a command word buffer.
*/
config.u64 = 0;
config.s.pool = CVMX_FPA_OUTPUT_BUFFER_POOL;
}
if (!(avail_coremask & (1 << coreid))) {
- /* core not available, assume, that catched by simple-executive */
+ /* core not available, assume, that caught by simple-executive */
cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
cvmx_write_csr(CVMX_CIU_PP_RST, 0);
}
* Written by Ralf Baechle and Andreas Busse, modified for DECstation
* support by Paul Antoine and Harald Koerfgen.
*
- * completly rewritten:
+ * completely rewritten:
* Copyright (C) 1998 Harald Koerfgen
*
* Rewritten extensively for controller-driven IRQ support
* PROM library functions for acquiring/using memory descriptors given to us
* from the ARCS firmware. This is only used when CONFIG_ARC_MEMORY is set
* because on some machines like SGI IP27 the ARC memory configuration data
- * completly bogus and alternate easier to use mechanisms are available.
+ * completely bogus and alternate easier to use mechanisms are available.
*/
#include <linux/init.h>
#include <linux/kernel.h>
.endm
/*
- * Do SMP slave processor setup necessary before we can savely execute C code.
+ * Do SMP slave processor setup necessary before we can safely execute C code.
*/
.macro smp_slave_setup
.endm
.endm
/*
- * Do SMP slave processor setup necessary before we can savely execute C code.
+ * Do SMP slave processor setup necessary before we can safely execute C code.
*/
.macro smp_slave_setup
.endm
#define __ASM_MACH_IP27_IRQ_H
/*
- * A hardwired interrupt number is completly stupid for this system - a
+ * A hardwired interrupt number is completely stupid for this system - a
* large configuration might have thousands if not tenthousands of
* interrupts.
*/
.endm
/*
- * Do SMP slave processor setup necessary before we can savely execute C code.
+ * Do SMP slave processor setup necessary before we can safely execute C code.
*/
.macro smp_slave_setup
GET_NASID_ASM t1
/*
Usually a driver for a SoC component has to request several gpio pins and
- configure them as funcion pins.
+ configure them as function pins.
jz_gpio_bulk_request can be used to ease this process.
Usually one would do something like:
* This function returns the physical base address of the Coherence Manager
* global control block, or 0 if no Coherence Manager is present. It provides
* a default implementation which reads the CMGCRBase register where available,
- * and may be overriden by platforms which determine this address in a
+ * and may be overridden by platforms which determine this address in a
* different way by defining a function with the same prototype except for the
* name mips_cm_phys_base (without underscores).
*/
/* Packet buffers */
#define CVMX_FPA_PACKET_POOL (0)
#define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE
-/* Work queue entrys */
+/* Work queue entries */
#define CVMX_FPA_WQE_POOL (1)
#define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE
/* PKO queue command buffers */
static inline void *cvmx_phys_to_ptr(uint64_t physical_address)
{
if (sizeof(void *) == 8) {
- /* Just set the top bit, avoiding any TLB uglyness */
+ /* Just set the top bit, avoiding any TLB ugliness */
return CASTPTR(void,
CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
physical_address));
union {
u32 cmd_word;
struct {
- u32 didn:4, /* Destination ID */
- sidn:4, /* Source ID */
- pactyp:4, /* Packet type */
- tnum:5, /* Trans Number */
- coh:1, /* Coh Transacti */
- ds:2, /* Data size */
- gbr:1, /* GBR enable */
- vbpm:1, /* VBPM message */
+ u32 didn:4, /* Destination ID */
+ sidn:4, /* Source ID */
+ pactyp:4, /* Packet type */
+ tnum:5, /* Trans Number */
+ coh:1, /* Coh Transaction */
+ ds:2, /* Data size */
+ gbr:1, /* GBR enable */
+ vbpm:1, /* VBPM message */
error:1, /* Error occurred */
- barr:1, /* Barrier op */
+ barr:1, /* Barrier op */
rsvd:8;
} berr_st;
} berr_un;
#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnostic ram test feature bit */
u32 _unused2[0x1000/4 - 8]; /* padding */
struct linux_vdirent {
ULONG namelen;
unsigned char attr;
- char fname[32]; /* XXX imperical, should be a define */
+ char fname[32]; /* XXX empirical, should be a define */
};
/* Other stuff for files. */
enum linux_devtypes dtype;
unsigned long namelen;
unsigned char attr;
- char name[32]; /* XXX imperical, should be define */
+ char name[32]; /* XXX empirical, should be define */
};
/* This describes the vector containing function pointers to the ARC
#define SSCR_PAUSE_STATE 0x40000000 /* sets when PAUSE takes effect */
#define SSCR_RESET 0x80000000 /* reset DMA channels */
-/* all producer/comsumer pointers are the same bitfield */
+/* all producer/consumer pointers are the same bitfield */
#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */
#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */
#define PROD_CONS_PTR_OFF 3
/*
* Values for field imsgtype
*/
-#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming Message from Xtalk */
#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */
#define IIO_ICRB_IMSGT_SN0NET 2 /* Incoming message from SN0 net */
#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */
}
/*
- * Is a address valid? This does a straighforward calculation rather
+ * Is a address valid? This does a straightforward calculation rather
* than tests.
*
* Address valid if:
"0x04", "cpc", "0x06", "0x07"
};
-/* CM3 Tag ECC transation type */
+/* CM3 Tag ECC transaction type */
static char *cm3_tr[16] = {
[0x0] = "ReqNoData",
[0x1] = "0x1",
/*
* MIPS performance counters can be per-TC. The control registers can
- * not be directly accessed accross CPUs. Hence if we want to do global
+ * not be directly accessed across CPUs. Hence if we want to do global
* control, we need cross CPU calls. on_each_cpu() can help us, but we
* can not make sure this function is called with interrupts enabled. So
* here we pause local counters and then grab a rwlock and leave the
/*
* Disable all but self interventions. The load from COHCTL is defined
* by the interAptiv & proAptiv SUMs as ensuring that the operation
- * resulting from the preceeding store is complete.
+ * resulting from the preceding store is complete.
*/
uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
uasm_i_sw(&p, t0, 0, r_pcohctl);
* allows us to only worry about whether an FP mode switch is in
* progress when FP is first used in a tasks time slice. Pretty much all
* of the mode switch overhead can thus be confined to cases where mode
- * switches are actually occuring. That is, to here. However for the
+ * switches are actually occurring. That is, to here. However for the
* thread performing the mode switch it may take a while...
*/
if (num_online_cpus() > 1) {
/*
* Copy the generic exception handlers to their final destination.
- * This will be overriden later as suitable for a particular
+ * This will be overridden later as suitable for a particular
* configuration.
*/
set_handler(0x180, &except_vec3_generic, 0x80);
kvm_debug("%s: vcpu %p, cpu: %d\n", __func__, vcpu, cpu);
- /* Alocate new kernel and user ASIDs if needed */
+ /* Allocate new kernel and user ASIDs if needed */
local_irq_save(flags);
kvm_write_c0_guest_config7(cop0, (MIPS_CONF7_WII) | (1 << 10));
/*
- * Setup IntCtl defaults, compatibilty mode for timer interrupts (HW5)
+ * Setup IntCtl defaults, compatibility mode for timer interrupts (HW5)
*/
kvm_write_c0_guest_intctl(cop0, 0xFC000000);
{
assert(xm); /* we don't gen exact zeros (probably should) */
- assert((xm >> (DP_FBITS + 1 + 3)) == 0); /* no execess */
+ assert((xm >> (DP_FBITS + 1 + 3)) == 0); /* no excess */
assert(xm & (DP_HIDDEN_BIT << 3));
if (xe < DP_EMIN) {
/* strip grs bits */
xm >>= 3;
- assert((xm >> (DP_FBITS + 1)) == 0); /* no execess */
+ assert((xm >> (DP_FBITS + 1)) == 0); /* no excess */
assert(xe >= DP_EMIN);
if (xe > DP_EMAX) {
ieee754_setcx(IEEE754_UNDERFLOW);
return builddp(sn, DP_EMIN - 1 + DP_EBIAS, xm);
} else {
- assert((xm >> (DP_FBITS + 1)) == 0); /* no execess */
+ assert((xm >> (DP_FBITS + 1)) == 0); /* no excess */
assert(xm & DP_HIDDEN_BIT);
return builddp(sn, xe + DP_EBIAS, xm & ~DP_HIDDEN_BIT);
{
assert(xm); /* we don't gen exact zeros (probably should) */
- assert((xm >> (SP_FBITS + 1 + 3)) == 0); /* no execess */
+ assert((xm >> (SP_FBITS + 1 + 3)) == 0); /* no excess */
assert(xm & (SP_HIDDEN_BIT << 3));
if (xe < SP_EMIN) {
/* strip grs bits */
xm >>= 3;
- assert((xm >> (SP_FBITS + 1)) == 0); /* no execess */
+ assert((xm >> (SP_FBITS + 1)) == 0); /* no excess */
assert(xe >= SP_EMIN);
if (xe > SP_EMAX) {
ieee754_setcx(IEEE754_UNDERFLOW);
return buildsp(sn, SP_EMIN - 1 + SP_EBIAS, xm);
} else {
- assert((xm >> (SP_FBITS + 1)) == 0); /* no execess */
+ assert((xm >> (SP_FBITS + 1)) == 0); /* no excess */
assert(xm & SP_HIDDEN_BIT);
return buildsp(sn, xe + SP_EBIAS, xm & ~SP_HIDDEN_BIT);
return 1;
}
-/* XXX Check with wje if the Indy caches can differenciate between
+/* XXX Check with wje if the Indy caches can differentiate between
writeback + invalidate and just invalidate. */
static struct bcache_ops indy_sc_ops = {
.bc_enable = indy_sc_enable,
* Copyright (C) 2011 MIPS Technologies, Inc.
*
* ... and the days got worse and worse and now you see
- * I've gone completly out of my mind.
+ * I've gone completely out of my mind.
*
* They're coming to take me a away haha
* they're coming to take me a away hoho hihi haha
* Copyright (C) 2000 by Silicon Graphics, Inc.
* Copyright (C) 2004 by Christoph Hellwig
*
- * On SGI IP27 the ARC memory configuration data is completly bogus but
+ * On SGI IP27 the ARC memory configuration data is completely bogus but
* alternate easier to use mechanisms are available.
*/
#include <linux/init.h>
projects / users / hch / configfs.git / commitdiff