USB: serial: qcserial: add Sierra Wireless EM7565

Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their
serial ports

T:  Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=9091 Rev= 0.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A
S:  SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

but need sendsetup = true for the NMEA port to make it work properly.

Simplify the patch compared to v1 as suggested by Bjørn Mork by taking
advantage of the fact that existing devices work with sendsetup = true
too.

Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add
DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID
0x9090.

Tests with several MC73xx/MC74xx/MC77xx devices have been performed in
order to verify backward compatibility.

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e3892541a489940f58bfa8f534ff0e765fc527f4..613f91add03da189c0fd5334cbccbbf720060079 100644 (file)
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = {
        {DEVICE_SWI(0x1199, 0x9079)},   /* Sierra Wireless EM74xx */
        {DEVICE_SWI(0x1199, 0x907a)},   /* Sierra Wireless EM74xx QDL */
        {DEVICE_SWI(0x1199, 0x907b)},   /* Sierra Wireless EM74xx */
+       {DEVICE_SWI(0x1199, 0x9090)},   /* Sierra Wireless EM7565 QDL */
+       {DEVICE_SWI(0x1199, 0x9091)},   /* Sierra Wireless EM7565 */
        {DEVICE_SWI(0x413c, 0x81a2)},   /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
        {DEVICE_SWI(0x413c, 0x81a3)},   /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
        {DEVICE_SWI(0x413c, 0x81a4)},   /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
@@ -342,6 +344,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
                        break;
                case 2:
                        dev_dbg(dev, "NMEA GPS interface found\n");
+                       sendsetup = true;
                        break;
                case 3:
                        dev_dbg(dev, "Modem port found\n");