--- /dev/null
+
+#ifndef XILINX_LL_TEMAC_H
+#define XILINX_LL_TEMAC_H
+
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+/* packet size info */
+#define XTE_HDR_SIZE 14 /* size of Ethernet header */
+#define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
+#define XTE_JUMBO_MTU 9000
+#define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
+
+/* Configuration options */
+
+/* Accept all incoming packets.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_PROMISC (1 << 0)
+/* Jumbo frame support for Tx & Rx.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_JUMBO (1 << 1)
+/* VLAN Rx & Tx frame support.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_VLAN (1 << 2)
+/* Enable recognition of flow control frames on Rx
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_FLOW_CONTROL (1 << 4)
+/* Strip FCS and PAD from incoming frames.
+ * Note: PAD from VLAN frames is not stripped.
+ * This option defaults to disabled (set) */
+#define XTE_OPTION_FCS_STRIP (1 << 5)
+/* Generate FCS field and add PAD automatically for outgoing frames.
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_FCS_INSERT (1 << 6)
+/* Enable Length/Type error checking for incoming frames. When this option is
+set, the MAC will filter frames that have a mismatched type/length field
+and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+types of frames are encountered. When this option is cleared, the MAC will
+allow these types of frames to be received.
+This option defaults to enabled (set) */
+#define XTE_OPTION_LENTYPE_ERR (1 << 7)
+/* Enable the transmitter.
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_TXEN (1 << 11)
+/* Enable the receiver
+* This option defaults to enabled (set) */
+#define XTE_OPTION_RXEN (1 << 12)
+
+/* Default options set when device is initialized or reset */
+#define XTE_OPTION_DEFAULTS \
+ (XTE_OPTION_TXEN | \
+ XTE_OPTION_FLOW_CONTROL | \
+ XTE_OPTION_RXEN)
+
+/* XPS_LL_TEMAC SDMA registers definition */
+
+#define TX_NXTDESC_PTR 0x00 /* r */
+#define TX_CURBUF_ADDR 0x01 /* r */
+#define TX_CURBUF_LENGTH 0x02 /* r */
+#define TX_CURDESC_PTR 0x03 /* rw */
+#define TX_TAILDESC_PTR 0x04 /* rw */
+#define TX_CHNL_CTRL 0x05 /* rw */
+/*
+ 0:7 24:31 IRQTimeout
+ 8:15 16:23 IRQCount
+ 16:20 11:15 Reserved
+ 21 10 0
+ 22 9 UseIntOnEnd
+ 23 8 LdIRQCnt
+ 24 7 IRQEn
+ 25:28 3:6 Reserved
+ 29 2 IrqErrEn
+ 30 1 IrqDlyEn
+ 31 0 IrqCoalEn
+*/
+#define CHNL_CTRL_IRQ_IOE (1 << 9)
+#define CHNL_CTRL_IRQ_EN (1 << 7)
+#define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
+#define CHNL_CTRL_IRQ_DLY_EN (1 << 1)
+#define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
+#define TX_IRQ_REG 0x06 /* rw */
+/*
+ 0:7 24:31 DltTmrValue
+ 8:15 16:23 ClscCntrValue
+ 16:17 14:15 Reserved
+ 18:21 10:13 ClscCnt
+ 22:23 8:9 DlyCnt
+ 24:28 3::7 Reserved
+ 29 2 ErrIrq
+ 30 1 DlyIrq
+ 31 0 CoalIrq
+ */
+#define TX_CHNL_STS 0x07 /* r */
+/*
+ 0:9 22:31 Reserved
+ 10 21 TailPErr
+ 11 20 CmpErr
+ 12 19 AddrErr
+ 13 18 NxtPErr
+ 14 17 CurPErr
+ 15 16 BsyWr
+ 16:23 8:15 Reserved
+ 24 7 Error
+ 25 6 IOE
+ 26 5 SOE
+ 27 4 Cmplt
+ 28 3 SOP
+ 29 2 EOP
+ 30 1 EngBusy
+ 31 0 Reserved
+*/
+
+#define RX_NXTDESC_PTR 0x08 /* r */
+#define RX_CURBUF_ADDR 0x09 /* r */
+#define RX_CURBUF_LENGTH 0x0a /* r */
+#define RX_CURDESC_PTR 0x0b /* rw */
+#define RX_TAILDESC_PTR 0x0c /* rw */
+#define RX_CHNL_CTRL 0x0d /* rw */
+/*
+ 0:7 24:31 IRQTimeout
+ 8:15 16:23 IRQCount
+ 16:20 11:15 Reserved
+ 21 10 0
+ 22 9 UseIntOnEnd
+ 23 8 LdIRQCnt
+ 24 7 IRQEn
+ 25:28 3:6 Reserved
+ 29 2 IrqErrEn
+ 30 1 IrqDlyEn
+ 31 0 IrqCoalEn
+ */
+#define RX_IRQ_REG 0x0e /* rw */
+#define IRQ_COAL (1 << 0)
+#define IRQ_DLY (1 << 1)
+#define IRQ_ERR (1 << 2)
+#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
+/*
+ 0:7 24:31 DltTmrValue
+ 8:15 16:23 ClscCntrValue
+ 16:17 14:15 Reserved
+ 18:21 10:13 ClscCnt
+ 22:23 8:9 DlyCnt
+ 24:28 3::7 Reserved
+*/
+#define RX_CHNL_STS 0x0f /* r */
+#define CHNL_STS_ENGBUSY (1 << 1)
+#define CHNL_STS_EOP (1 << 2)
+#define CHNL_STS_SOP (1 << 3)
+#define CHNL_STS_CMPLT (1 << 4)
+#define CHNL_STS_SOE (1 << 5)
+#define CHNL_STS_IOE (1 << 6)
+#define CHNL_STS_ERR (1 << 7)
+
+#define CHNL_STS_BSYWR (1 << 16)
+#define CHNL_STS_CURPERR (1 << 17)
+#define CHNL_STS_NXTPERR (1 << 18)
+#define CHNL_STS_ADDRERR (1 << 19)
+#define CHNL_STS_CMPERR (1 << 20)
+#define CHNL_STS_TAILERR (1 << 21)
+/*
+ 0:9 22:31 Reserved
+ 10 21 TailPErr
+ 11 20 CmpErr
+ 12 19 AddrErr
+ 13 18 NxtPErr
+ 14 17 CurPErr
+ 15 16 BsyWr
+ 16:23 8:15 Reserved
+ 24 7 Error
+ 25 6 IOE
+ 26 5 SOE
+ 27 4 Cmplt
+ 28 3 SOP
+ 29 2 EOP
+ 30 1 EngBusy
+ 31 0 Reserved
+*/
+
+#define DMA_CONTROL_REG 0x10 /* rw */
+#define DMA_CONTROL_RST (1 << 0)
+#define DMA_TAIL_ENABLE (1 << 2)
+
+/* XPS_LL_TEMAC direct registers definition */
+
+#define XTE_RAF0_OFFSET 0x00
+#define RAF0_RST (1 << 0)
+#define RAF0_MCSTREJ (1 << 1)
+#define RAF0_BCSTREJ (1 << 2)
+#define XTE_TPF0_OFFSET 0x04
+#define XTE_IFGP0_OFFSET 0x08
+#define XTE_ISR0_OFFSET 0x0c
+#define ISR0_HARDACSCMPLT (1 << 0)
+#define ISR0_AUTONEG (1 << 1)
+#define ISR0_RXCMPLT (1 << 2)
+#define ISR0_RXREJ (1 << 3)
+#define ISR0_RXFIFOOVR (1 << 4)
+#define ISR0_TXCMPLT (1 << 5)
+#define ISR0_RXDCMLCK (1 << 6)
+
+#define XTE_IPR0_OFFSET 0x10
+#define XTE_IER0_OFFSET 0x14
+
+#define XTE_MSW0_OFFSET 0x20
+#define XTE_LSW0_OFFSET 0x24
+#define XTE_CTL0_OFFSET 0x28
+#define XTE_RDY0_OFFSET 0x2c
+
+#define XTE_RSE_MIIM_RR_MASK 0x0002
+#define XTE_RSE_MIIM_WR_MASK 0x0004
+#define XTE_RSE_CFG_RR_MASK 0x0020
+#define XTE_RSE_CFG_WR_MASK 0x0040
+#define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000)
+
+/* XPS_LL_TEMAC indirect registers offset definition */
+
+#define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */
+#define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */
+#define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */
+#define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */
+#define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */
+#define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */
+#define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */
+#define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */
+#define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */
+
+#define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */
+#define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */
+#define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */
+#define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */
+#define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */
+#define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */
+#define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */
+
+#define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */
+#define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */
+#define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */
+
+#define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */
+#define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */
+#define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */
+#define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */
+
+#define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */
+#define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */
+#define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */
+#define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */
+
+#define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */
+#define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */
+#define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */
+#define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */
+
+/* Interrupt Request status */
+#define XTE_TIS_OFFSET 0x000003A0
+#define TIS_FRIS (1 << 0)
+#define TIS_MRIS (1 << 1)
+#define TIS_MWIS (1 << 2)
+#define TIS_ARIS (1 << 3)
+#define TIS_AWIS (1 << 4)
+#define TIS_CRIS (1 << 5)
+#define TIS_CWIS (1 << 6)
+
+#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */
+
+/** MII Mamagement Control register (MGTCR) */
+#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
+#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
+
+#define CNTLREG_WRITE_ENABLE_MASK 0x8000
+#define CNTLREG_EMAC1SEL_MASK 0x0400
+#define CNTLREG_ADDRESSCODE_MASK 0x03ff
+
+/* CDMAC descriptor status bit definitions */
+
+#define STS_CTRL_APP0_ERR (1 << 31)
+#define STS_CTRL_APP0_IRQONEND (1 << 30)
+/* undoccumented */
+#define STS_CTRL_APP0_STOPONEND (1 << 29)
+#define STS_CTRL_APP0_CMPLT (1 << 28)
+#define STS_CTRL_APP0_SOP (1 << 27)
+#define STS_CTRL_APP0_EOP (1 << 26)
+#define STS_CTRL_APP0_ENGBUSY (1 << 25)
+/* undocumented */
+#define STS_CTRL_APP0_ENGRST (1 << 24)
+
+#define TX_CONTROL_CALC_CSUM_MASK 1
+
+#define XTE_ALIGN 32
+#define BUFFER_ALIGN(adr) ((XTE_ALIGN - ((u32) adr)) % XTE_ALIGN)
+
+#define MULTICAST_CAM_TABLE_NUM 4
+
+/* TX/RX CURDESC_PTR points to first descriptor */
+/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
+
+/**
+ * struct cdmac_bd - LocalLink buffer descriptor format
+ *
+ * app0 bits:
+ * 0 Error
+ * 1 IrqOnEnd generate an interrupt at completion of DMA op
+ * 2 reserved
+ * 3 completed Current descriptor completed
+ * 4 SOP TX - marks first desc/ RX marks first desct
+ * 5 EOP TX marks last desc/RX marks last desc
+ * 6 EngBusy DMA is processing
+ * 7 reserved
+ * 8:31 application specific
+ */
+struct cdmac_bd {
+ u32 next; /* Physical address of next buffer descriptor */
+ u32 phys;
+ u32 len;
+ u32 app0;
+ u32 app1; /* TX start << 16 | insert */
+ u32 app2; /* TX csum */
+ u32 app3;
+ u32 app4; /* skb for TX length for RX */
+};
+
+struct temac_local {
+ struct net_device *ndev;
+ struct device *dev;
+
+ /* Connection to PHY device */
+ struct phy_device *phy_dev; /* Pointer to PHY device */
+ struct device_node *phy_node;
+
+ /* MDIO bus data */
+ struct mii_bus *mii_bus; /* MII bus reference */
+ int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */
+
+ /* IO registers and IRQs */
+ void __iomem *regs;
+ dcr_host_t sdma_dcrs;
+ int tx_irq;
+ int rx_irq;
+ int emac_num;
+
+ struct sk_buff **rx_skb;
+ spinlock_t rx_lock;
+ struct mutex indirect_mutex;
+ u32 options; /* Current options word */
+ int last_link;
+
+ /* Buffer descriptors */
+ struct cdmac_bd *tx_bd_v;
+ dma_addr_t tx_bd_p;
+ struct cdmac_bd *rx_bd_v;
+ dma_addr_t rx_bd_p;
+ int tx_bd_ci;
+ int tx_bd_next;
+ int tx_bd_tail;
+ int rx_bd_ci;
+};
+
+/* xilinx_temac.c */
+u32 temac_ior(struct temac_local *lp, int offset);
+void temac_iow(struct temac_local *lp, int offset, u32 value);
+int temac_indirect_busywait(struct temac_local *lp);
+u32 temac_indirect_in32(struct temac_local *lp, int reg);
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
+
+
+/* xilinx_temac_mdio.c */
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
+void temac_mdio_teardown(struct temac_local *lp);
+
+#endif /* XILINX_LL_TEMAC_H */
--- /dev/null
+/*
+ * Driver for Xilinx TEMAC Ethernet device
+ *
+ * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi
+ * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. <dhlii@dlasys.net>
+ * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
+ *
+ * This is a driver for the Xilinx ll_temac ipcore which is often used
+ * in the Virtex and Spartan series of chips.
+ *
+ * Notes:
+ * - The ll_temac hardware uses indirect access for many of the TEMAC
+ * registers, include the MDIO bus. However, indirect access to MDIO
+ * registers take considerably more clock cycles than to TEMAC registers.
+ * MDIO accesses are long, so threads doing them should probably sleep
+ * rather than busywait. However, since only one indirect access can be
+ * in progress at any given time, that means that *all* indirect accesses
+ * could end up sleeping (to wait for an MDIO access to complete).
+ * Fortunately none of the indirect accesses are on the 'hot' path for tx
+ * or rx, so this should be okay.
+ *
+ * TODO:
+ * - Fix driver to work on more than just Virtex5. Right now the driver
+ * assumes that the locallink DMA registers are accessed via DCR
+ * instructions.
+ * - Factor out locallink DMA code into separate driver
+ * - Fix multicast assignment.
+ * - Fix support for hardware checksumming.
+ * - Testing. Lots and lots of testing.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/tcp.h> /* needed for sizeof(tcphdr) */
+#include <linux/udp.h> /* needed for sizeof(udphdr) */
+#include <linux/phy.h>
+#include <linux/in.h>
+#include <linux/io.h>
+#include <linux/ip.h>
+
+#include "ll_temac.h"
+
+#define TX_BD_NUM 64
+#define RX_BD_NUM 128
+
+/* ---------------------------------------------------------------------
+ * Low level register access functions
+ */
+
+u32 temac_ior(struct temac_local *lp, int offset)
+{
+ return in_be32((u32 *)(lp->regs + offset));
+}
+
+void temac_iow(struct temac_local *lp, int offset, u32 value)
+{
+ out_be32((u32 *) (lp->regs + offset), value);
+}
+
+int temac_indirect_busywait(struct temac_local *lp)
+{
+ long end = jiffies + 2;
+
+ while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
+ if (end - jiffies <= 0) {
+ WARN_ON(1);
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+ return 0;
+}
+
+/**
+ * temac_indirect_in32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+u32 temac_indirect_in32(struct temac_local *lp, int reg)
+{
+ u32 val;
+
+ if (temac_indirect_busywait(lp))
+ return -ETIMEDOUT;
+ temac_iow(lp, XTE_CTL0_OFFSET, reg);
+ if (temac_indirect_busywait(lp))
+ return -ETIMEDOUT;
+ val = temac_ior(lp, XTE_LSW0_OFFSET);
+
+ return val;
+}
+
+/**
+ * temac_indirect_out32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
+{
+ if (temac_indirect_busywait(lp))
+ return;
+ temac_iow(lp, XTE_LSW0_OFFSET, value);
+ temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+}
+
+static u32 temac_dma_in32(struct temac_local *lp, int reg)
+{
+ return dcr_read(lp->sdma_dcrs, reg);
+}
+
+static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
+{
+ dcr_write(lp->sdma_dcrs, reg, value);
+}
+
+/**
+ * temac_dma_bd_init - Setup buffer descriptor rings
+ */
+static int temac_dma_bd_init(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct sk_buff *skb;
+ int i;
+
+ lp->rx_skb = kzalloc(sizeof(struct sk_buff)*RX_BD_NUM, GFP_KERNEL);
+ /* allocate the tx and rx ring buffer descriptors. */
+ /* returns a virtual addres and a physical address. */
+ lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+ sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+ &lp->tx_bd_p, GFP_KERNEL);
+ lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+ sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+ &lp->rx_bd_p, GFP_KERNEL);
+
+ memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
+ for (i = 0; i < TX_BD_NUM; i++) {
+ lp->tx_bd_v[i].next = lp->tx_bd_p +
+ sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM);
+ }
+
+ memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
+ for (i = 0; i < RX_BD_NUM; i++) {
+ lp->rx_bd_v[i].next = lp->rx_bd_p +
+ sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
+
+ skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE
+ + XTE_ALIGN, GFP_ATOMIC);
+ if (skb == 0) {
+ dev_err(&ndev->dev, "alloc_skb error %d\n", i);
+ return -1;
+ }
+ lp->rx_skb[i] = skb;
+ skb_reserve(skb, BUFFER_ALIGN(skb->data));
+ /* returns physical address of skb->data */
+ lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
+ skb->data,
+ XTE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+ lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
+ lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
+ }
+
+ temac_dma_out32(lp, TX_CHNL_CTRL, 0x10220400 |
+ CHNL_CTRL_IRQ_EN |
+ CHNL_CTRL_IRQ_DLY_EN |
+ CHNL_CTRL_IRQ_COAL_EN);
+ /* 0x10220483 */
+ /* 0x00100483 */
+ temac_dma_out32(lp, RX_CHNL_CTRL, 0xff010000 |
+ CHNL_CTRL_IRQ_EN |
+ CHNL_CTRL_IRQ_DLY_EN |
+ CHNL_CTRL_IRQ_COAL_EN |
+ CHNL_CTRL_IRQ_IOE);
+ /* 0xff010283 */
+
+ temac_dma_out32(lp, RX_CURDESC_PTR, lp->rx_bd_p);
+ temac_dma_out32(lp, RX_TAILDESC_PTR,
+ lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+ temac_dma_out32(lp, TX_CURDESC_PTR, lp->tx_bd_p);
+
+ return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * net_device_ops
+ */
+
+static int temac_set_mac_address(struct net_device *ndev, void *address)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+
+ if (address)
+ memcpy(ndev->dev_addr, address, ETH_ALEN);
+
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ random_ether_addr(ndev->dev_addr);
+
+ /* set up unicast MAC address filter set its mac address */
+ mutex_lock(&lp->indirect_mutex);
+ temac_indirect_out32(lp, XTE_UAW0_OFFSET,
+ (ndev->dev_addr[0]) |
+ (ndev->dev_addr[1] << 8) |
+ (ndev->dev_addr[2] << 16) |
+ (ndev->dev_addr[3] << 24));
+ /* There are reserved bits in EUAW1
+ * so don't affect them Set MAC bits [47:32] in EUAW1 */
+ temac_indirect_out32(lp, XTE_UAW1_OFFSET,
+ (ndev->dev_addr[4] & 0x000000ff) |
+ (ndev->dev_addr[5] << 8));
+ mutex_unlock(&lp->indirect_mutex);
+
+ return 0;
+}
+
+static void temac_set_multicast_list(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ u32 multi_addr_msw, multi_addr_lsw, val;
+ int i;
+
+ mutex_lock(&lp->indirect_mutex);
+ if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)
+ || ndev->mc_count > MULTICAST_CAM_TABLE_NUM) {
+ /*
+ * We must make the kernel realise we had to move
+ * into promisc mode or we start all out war on
+ * the cable. If it was a promisc request the
+ * flag is already set. If not we assert it.
+ */
+ ndev->flags |= IFF_PROMISC;
+ temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
+ dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
+ } else if (ndev->mc_count) {
+ struct dev_mc_list *mclist = ndev->mc_list;
+ for (i = 0; mclist && i < ndev->mc_count; i++) {
+
+ if (i >= MULTICAST_CAM_TABLE_NUM)
+ break;
+ multi_addr_msw = ((mclist->dmi_addr[3] << 24) |
+ (mclist->dmi_addr[2] << 16) |
+ (mclist->dmi_addr[1] << 8) |
+ (mclist->dmi_addr[0]));
+ temac_indirect_out32(lp, XTE_MAW0_OFFSET,
+ multi_addr_msw);
+ multi_addr_lsw = ((mclist->dmi_addr[5] << 8) |
+ (mclist->dmi_addr[4]) | (i << 16));
+ temac_indirect_out32(lp, XTE_MAW1_OFFSET,
+ multi_addr_lsw);
+ mclist = mclist->next;
+ }
+ } else {
+ val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
+ temac_indirect_out32(lp, XTE_AFM_OFFSET,
+ val & ~XTE_AFM_EPPRM_MASK);
+ temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
+ dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
+ }
+ mutex_unlock(&lp->indirect_mutex);
+}
+
+struct temac_option {
+ int flg;
+ u32 opt;
+ u32 reg;
+ u32 m_or;
+ u32 m_and;
+} temac_options[] = {
+ /* Turn on jumbo packet support for both Rx and Tx */
+ {
+ .opt = XTE_OPTION_JUMBO,
+ .reg = XTE_TXC_OFFSET,
+ .m_or = XTE_TXC_TXJMBO_MASK,
+ },
+ {
+ .opt = XTE_OPTION_JUMBO,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXJMBO_MASK,
+ },
+ /* Turn on VLAN packet support for both Rx and Tx */
+ {
+ .opt = XTE_OPTION_VLAN,
+ .reg = XTE_TXC_OFFSET,
+ .m_or =XTE_TXC_TXVLAN_MASK,
+ },
+ {
+ .opt = XTE_OPTION_VLAN,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXVLAN_MASK,
+ },
+ /* Turn on FCS stripping on receive packets */
+ {
+ .opt = XTE_OPTION_FCS_STRIP,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXFCS_MASK,
+ },
+ /* Turn on FCS insertion on transmit packets */
+ {
+ .opt = XTE_OPTION_FCS_INSERT,
+ .reg = XTE_TXC_OFFSET,
+ .m_or =XTE_TXC_TXFCS_MASK,
+ },
+ /* Turn on length/type field checking on receive packets */
+ {
+ .opt = XTE_OPTION_LENTYPE_ERR,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXLT_MASK,
+ },
+ /* Turn on flow control */
+ {
+ .opt = XTE_OPTION_FLOW_CONTROL,
+ .reg = XTE_FCC_OFFSET,
+ .m_or =XTE_FCC_RXFLO_MASK,
+ },
+ /* Turn on flow control */
+ {
+ .opt = XTE_OPTION_FLOW_CONTROL,
+ .reg = XTE_FCC_OFFSET,
+ .m_or =XTE_FCC_TXFLO_MASK,
+ },
+ /* Turn on promiscuous frame filtering (all frames are received ) */
+ {
+ .opt = XTE_OPTION_PROMISC,
+ .reg = XTE_AFM_OFFSET,
+ .m_or =XTE_AFM_EPPRM_MASK,
+ },
+ /* Enable transmitter if not already enabled */
+ {
+ .opt = XTE_OPTION_TXEN,
+ .reg = XTE_TXC_OFFSET,
+ .m_or =XTE_TXC_TXEN_MASK,
+ },
+ /* Enable receiver? */
+ {
+ .opt = XTE_OPTION_RXEN,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXEN_MASK,
+ },
+ {}
+};
+
+/**
+ * temac_setoptions
+ */
+static u32 temac_setoptions(struct net_device *ndev, u32 options)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct temac_option *tp = &temac_options[0];
+ int reg;
+
+ mutex_lock(&lp->indirect_mutex);
+ while (tp->opt) {
+ reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
+ if (options & tp->opt)
+ reg |= tp->m_or;
+ temac_indirect_out32(lp, tp->reg, reg);
+ tp++;
+ }
+ lp->options |= options;
+ mutex_unlock(&lp->indirect_mutex);
+
+ return (0);
+}
+
+/* Initilize temac */
+static void temac_device_reset(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ u32 timeout;
+ u32 val;
+
+ /* Perform a software reset */
+
+ /* 0x300 host enable bit ? */
+ /* reset PHY through control register ?:1 */
+
+ dev_dbg(&ndev->dev, "%s()\n", __func__);
+
+ mutex_lock(&lp->indirect_mutex);
+ /* Reset the receiver and wait for it to finish reset */
+ temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
+ timeout = 1000;
+ while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) {
+ udelay(1);
+ if (--timeout == 0) {
+ dev_err(&ndev->dev,
+ "temac_device_reset RX reset timeout!!\n");
+ break;
+ }
+ }
+
+ /* Reset the transmitter and wait for it to finish reset */
+ temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK);
+ timeout = 1000;
+ while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) {
+ udelay(1);
+ if (--timeout == 0) {
+ dev_err(&ndev->dev,
+ "temac_device_reset TX reset timeout!!\n");
+ break;
+ }
+ }
+
+ /* Disable the receiver */
+ val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
+ temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
+
+ /* Reset Local Link (DMA) */
+ temac_dma_out32(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+ timeout = 1000;
+ while (temac_dma_in32(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
+ udelay(1);
+ if (--timeout == 0) {
+ dev_err(&ndev->dev,
+ "temac_device_reset DMA reset timeout!!\n");
+ break;
+ }
+ }
+ temac_dma_out32(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
+
+ temac_dma_bd_init(ndev);
+
+ temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
+
+ mutex_unlock(&lp->indirect_mutex);
+
+ /* Sync default options with HW
+ * but leave receiver and transmitter disabled. */
+ temac_setoptions(ndev,
+ lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
+
+ temac_set_mac_address(ndev, NULL);
+
+ /* Set address filter table */
+ temac_set_multicast_list(ndev);
+ if (temac_setoptions(ndev, lp->options))
+ dev_err(&ndev->dev, "Error setting TEMAC options\n");
+
+ /* Init Driver variable */
+ ndev->trans_start = 0;
+}
+
+void temac_adjust_link(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct phy_device *phy = lp->phy_dev;
+ u32 mii_speed;
+ int link_state;
+
+ /* hash together the state values to decide if something has changed */
+ link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+ mutex_lock(&lp->indirect_mutex);
+ if (lp->last_link != link_state) {
+ mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
+ mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
+
+ switch (phy->speed) {
+ case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
+ case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
+ case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
+ }
+
+ /* Write new speed setting out to TEMAC */
+ temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
+ lp->last_link = link_state;
+ phy_print_status(phy);
+ }
+ mutex_unlock(&lp->indirect_mutex);
+}
+
+static void temac_start_xmit_done(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct cdmac_bd *cur_p;
+ unsigned int stat = 0;
+
+ cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+ stat = cur_p->app0;
+
+ while (stat & STS_CTRL_APP0_CMPLT) {
+ dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
+ DMA_TO_DEVICE);
+ if (cur_p->app4)
+ dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
+ cur_p->app0 = 0;
+
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += cur_p->len;
+
+ lp->tx_bd_ci++;
+ if (lp->tx_bd_ci >= TX_BD_NUM)
+ lp->tx_bd_ci = 0;
+
+ cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+ stat = cur_p->app0;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct cdmac_bd *cur_p;
+ dma_addr_t start_p, tail_p;
+ int ii;
+ unsigned long num_frag;
+ skb_frag_t *frag;
+
+ num_frag = skb_shinfo(skb)->nr_frags;
+ frag = &skb_shinfo(skb)->frags[0];
+ start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+ cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+
+ if (cur_p->app0 & STS_CTRL_APP0_CMPLT) {
+ if (!netif_queue_stopped(ndev)) {
+ netif_stop_queue(ndev);
+ return NETDEV_TX_BUSY;
+ }
+ return NETDEV_TX_BUSY;
+ }
+
+ cur_p->app0 = 0;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ const struct iphdr *ip = ip_hdr(skb);
+ int length = 0, start = 0, insert = 0;
+
+ switch (ip->protocol) {
+ case IPPROTO_TCP:
+ start = sizeof(struct iphdr) + ETH_HLEN;
+ insert = sizeof(struct iphdr) + ETH_HLEN + 16;
+ length = ip->tot_len - sizeof(struct iphdr);
+ break;
+ case IPPROTO_UDP:
+ start = sizeof(struct iphdr) + ETH_HLEN;
+ insert = sizeof(struct iphdr) + ETH_HLEN + 6;
+ length = ip->tot_len - sizeof(struct iphdr);
+ break;
+ default:
+ break;
+ }
+ cur_p->app1 = ((start << 16) | insert);
+ cur_p->app2 = csum_tcpudp_magic(ip->saddr, ip->daddr,
+ length, ip->protocol, 0);
+ skb->data[insert] = 0;
+ skb->data[insert + 1] = 0;
+ }
+ cur_p->app0 |= STS_CTRL_APP0_SOP;
+ cur_p->len = skb_headlen(skb);
+ cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ cur_p->app4 = (unsigned long)skb;
+
+ for (ii = 0; ii < num_frag; ii++) {
+ lp->tx_bd_tail++;
+ if (lp->tx_bd_tail >= TX_BD_NUM)
+ lp->tx_bd_tail = 0;
+
+ cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+ cur_p->phys = dma_map_single(ndev->dev.parent,
+ (void *)page_address(frag->page) +
+ frag->page_offset,
+ frag->size, DMA_TO_DEVICE);
+ cur_p->len = frag->size;
+ cur_p->app0 = 0;
+ frag++;
+ }
+ cur_p->app0 |= STS_CTRL_APP0_EOP;
+
+ tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+ lp->tx_bd_tail++;
+ if (lp->tx_bd_tail >= TX_BD_NUM)
+ lp->tx_bd_tail = 0;
+
+ /* Kick off the transfer */
+ temac_dma_out32(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
+
+ return 0;
+}
+
+
+static void ll_temac_recv(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct sk_buff *skb, *new_skb;
+ unsigned int bdstat;
+ struct cdmac_bd *cur_p;
+ dma_addr_t tail_p;
+ int length;
+ unsigned long skb_vaddr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->rx_lock, flags);
+
+ tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+ cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+
+ bdstat = cur_p->app0;
+ while ((bdstat & STS_CTRL_APP0_CMPLT)) {
+
+ skb = lp->rx_skb[lp->rx_bd_ci];
+ length = cur_p->app4;
+
+ skb_vaddr = virt_to_bus(skb->data);
+ dma_unmap_single(ndev->dev.parent, skb_vaddr, length,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, length);
+ skb->dev = ndev;
+ skb->protocol = eth_type_trans(skb, ndev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ netif_rx(skb);
+
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += length;
+
+ new_skb = alloc_skb(XTE_MAX_JUMBO_FRAME_SIZE + XTE_ALIGN,
+ GFP_ATOMIC);
+ if (new_skb == 0) {
+ dev_err(&ndev->dev, "no memory for new sk_buff\n");
+ spin_unlock_irqrestore(&lp->rx_lock, flags);
+ return;
+ }
+
+ skb_reserve(new_skb, BUFFER_ALIGN(new_skb->data));
+
+ cur_p->app0 = STS_CTRL_APP0_IRQONEND;
+ cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
+ XTE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+ cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
+ lp->rx_skb[lp->rx_bd_ci] = new_skb;
+
+ lp->rx_bd_ci++;
+ if (lp->rx_bd_ci >= RX_BD_NUM)
+ lp->rx_bd_ci = 0;
+
+ cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+ bdstat = cur_p->app0;
+ }
+ temac_dma_out32(lp, RX_TAILDESC_PTR, tail_p);
+
+ spin_unlock_irqrestore(&lp->rx_lock, flags);
+}
+
+static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
+{
+ struct net_device *ndev = _ndev;
+ struct temac_local *lp = netdev_priv(ndev);
+ unsigned int status;
+
+ status = temac_dma_in32(lp, TX_IRQ_REG);
+ temac_dma_out32(lp, TX_IRQ_REG, status);
+
+ if (status & (IRQ_COAL | IRQ_DLY))
+ temac_start_xmit_done(lp->ndev);
+ if (status & 0x080)
+ dev_err(&ndev->dev, "DMA error 0x%x\n", status);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
+{
+ struct net_device *ndev = _ndev;
+ struct temac_local *lp = netdev_priv(ndev);
+ unsigned int status;
+
+ /* Read and clear the status registers */
+ status = temac_dma_in32(lp, RX_IRQ_REG);
+ temac_dma_out32(lp, RX_IRQ_REG, status);
+
+ if (status & (IRQ_COAL | IRQ_DLY))
+ ll_temac_recv(lp->ndev);
+
+ return IRQ_HANDLED;
+}
+
+static int temac_open(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ int rc;
+
+ dev_dbg(&ndev->dev, "temac_open()\n");
+
+ if (lp->phy_node) {
+ lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+ temac_adjust_link, 0, 0);
+ if (!lp->phy_dev) {
+ dev_err(lp->dev, "of_phy_connect() failed\n");
+ return -ENODEV;
+ }
+
+ phy_start(lp->phy_dev);
+ }
+
+ rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
+ if (rc)
+ goto err_tx_irq;
+ rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev);
+ if (rc)
+ goto err_rx_irq;
+
+ temac_device_reset(ndev);
+ return 0;
+
+ err_rx_irq:
+ free_irq(lp->tx_irq, ndev);
+ err_tx_irq:
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ lp->phy_dev = NULL;
+ dev_err(lp->dev, "request_irq() failed\n");
+ return rc;
+}
+
+static int temac_stop(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+
+ dev_dbg(&ndev->dev, "temac_close()\n");
+
+ free_irq(lp->tx_irq, ndev);
+ free_irq(lp->rx_irq, ndev);
+
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ lp->phy_dev = NULL;
+
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+temac_poll_controller(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+
+ disable_irq(lp->tx_irq);
+ disable_irq(lp->rx_irq);
+
+ ll_temac_rx_irq(lp->tx_irq, lp);
+ ll_temac_tx_irq(lp->rx_irq, lp);
+
+ enable_irq(lp->tx_irq);
+ enable_irq(lp->rx_irq);
+}
+#endif
+
+static const struct net_device_ops temac_netdev_ops = {
+ .ndo_open = temac_open,
+ .ndo_stop = temac_stop,
+ .ndo_start_xmit = temac_start_xmit,
+ .ndo_set_mac_address = temac_set_mac_address,
+ //.ndo_set_multicast_list = temac_set_multicast_list,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = temac_poll_controller,
+#endif
+};
+
+/* ---------------------------------------------------------------------
+ * SYSFS device attributes
+ */
+static ssize_t temac_show_llink_regs(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct temac_local *lp = netdev_priv(ndev);
+ int i, len = 0;
+
+ for (i = 0; i < 0x11; i++)
+ len += sprintf(buf + len, "%.8x%s", temac_dma_in32(lp, i),
+ (i % 8) == 7 ? "\n" : " ");
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL);
+
+static struct attribute *temac_device_attrs[] = {
+ &dev_attr_llink_regs.attr,
+ NULL,
+};
+
+static const struct attribute_group temac_attr_group = {
+ .attrs = temac_device_attrs,
+};
+
+static int __init
+temac_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct device_node *np;
+ struct temac_local *lp;
+ struct net_device *ndev;
+ const void *addr;
+ int size, rc = 0;
+ unsigned int dcrs;
+
+ /* Init network device structure */
+ ndev = alloc_etherdev(sizeof(*lp));
+ if (!ndev) {
+ dev_err(&op->dev, "could not allocate device.\n");
+ return -ENOMEM;
+ }
+ ether_setup(ndev);
+ dev_set_drvdata(&op->dev, ndev);
+ SET_NETDEV_DEV(ndev, &op->dev);
+ ndev->flags &= ~IFF_MULTICAST; /* clear multicast */
+ ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
+ ndev->netdev_ops = &temac_netdev_ops;
+#if 0
+ ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */
+ ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */
+ ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */
+ ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */
+ ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */
+ ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */
+ ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */
+ ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */
+ ndev->features |= NETIF_F_GSO; /* Enable software GSO. */
+ ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */
+ ndev->features |= NETIF_F_LRO; /* large receive offload */
+#endif
+
+ /* setup temac private info structure */
+ lp = netdev_priv(ndev);
+ lp->ndev = ndev;
+ lp->dev = &op->dev;
+ lp->options = XTE_OPTION_DEFAULTS;
+ spin_lock_init(&lp->rx_lock);
+ mutex_init(&lp->indirect_mutex);
+
+ /* map device registers */
+ lp->regs = of_iomap(op->node, 0);
+ if (!lp->regs) {
+ dev_err(&op->dev, "could not map temac regs.\n");
+ goto nodev;
+ }
+
+ /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
+ np = of_parse_phandle(op->node, "llink-connected", 0);
+ if (!np) {
+ dev_err(&op->dev, "could not find DMA node\n");
+ goto nodev;
+ }
+
+ dcrs = dcr_resource_start(np, 0);
+ if (dcrs == 0) {
+ dev_err(&op->dev, "could not get DMA register address\n");
+ goto nodev;;
+ }
+ lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+ dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
+
+ lp->rx_irq = irq_of_parse_and_map(np, 0);
+ lp->tx_irq = irq_of_parse_and_map(np, 1);
+ if (!lp->rx_irq || !lp->tx_irq) {
+ dev_err(&op->dev, "could not determine irqs\n");
+ rc = -ENOMEM;
+ goto nodev;
+ }
+
+ of_node_put(np); /* Finished with the DMA node; drop the reference */
+
+ /* Retrieve the MAC address */
+ addr = of_get_property(op->node, "local-mac-address", &size);
+ if ((!addr) || (size != 6)) {
+ dev_err(&op->dev, "could not find MAC address\n");
+ rc = -ENODEV;
+ goto nodev;
+ }
+ temac_set_mac_address(ndev, (void *)addr);
+
+ rc = temac_mdio_setup(lp, op->node);
+ if (rc)
+ dev_warn(&op->dev, "error registering MDIO bus\n");
+
+ lp->phy_node = of_parse_phandle(op->node, "phy-handle", 0);
+ if (lp->phy_node)
+ dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np);
+
+ /* Add the device attributes */
+ rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
+ if (rc) {
+ dev_err(lp->dev, "Error creating sysfs files\n");
+ goto nodev;
+ }
+
+ rc = register_netdev(lp->ndev);
+ if (rc) {
+ dev_err(lp->dev, "register_netdev() error (%i)\n", rc);
+ goto err_register_ndev;
+ }
+
+ return 0;
+
+ err_register_ndev:
+ sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ nodev:
+ free_netdev(ndev);
+ ndev = NULL;
+ return rc;
+}
+
+static int __devexit temac_of_remove(struct of_device *op)
+{
+ struct net_device *ndev = dev_get_drvdata(&op->dev);
+ struct temac_local *lp = netdev_priv(ndev);
+
+ temac_mdio_teardown(lp);
+ unregister_netdev(ndev);
+ sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ if (lp->phy_node)
+ of_node_put(lp->phy_node);
+ lp->phy_node = NULL;
+ dev_set_drvdata(&op->dev, NULL);
+ free_netdev(ndev);
+ return 0;
+}
+
+static struct of_device_id temac_of_match[] __devinitdata = {
+ { .compatible = "xlnx,xps-ll-temac-1.01.b", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, temac_of_match);
+
+static struct of_platform_driver temac_of_driver = {
+ .match_table = temac_of_match,
+ .probe = temac_of_probe,
+ .remove = __devexit_p(temac_of_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "xilinx_temac",
+ },
+};
+
+static int __init temac_init(void)
+{
+ return of_register_platform_driver(&temac_of_driver);
+}
+module_init(temac_init);
+
+static void __exit temac_exit(void)
+{
+ of_unregister_platform_driver(&temac_of_driver);
+}
+module_exit(temac_exit);
+
+MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
+MODULE_AUTHOR("Yoshio Kashiwagi");
+MODULE_LICENSE("GPL");
projects / users / hch / xfs.git / commitdiff