arm64: dts: qcom: qcs8300-ride: Enable PMIC peripherals

Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
Link: https://lore.kernel.org/r/20250108-adds-spmi-pmic-peripherals-for-qcs8300-v3-2-ee94642279ff@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
new file mode 100644 (file)
index 0000000..a94b0bf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+       pmm8620au_0: pmic@0 {
+               compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+               reg = <0x0 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pmm8620au_0_rtc: rtc@6100 {
+                       compatible = "qcom,pmk8350-rtc";
+                       reg = <0x6100>, <0x6200>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+                       allow-set-time;
+               };
+
+               pmm8620au_0_gpios: gpio@8800 {
+                       compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+                       reg = <0x8800>;
+                       gpio-controller;
+                       gpio-ranges = <&pmm8620au_0_gpios 0 0 12>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       pmm8650au_1: pmic@2 {
+               compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+               reg = <0x2 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pmm8650au_1_gpios: gpio@8800 {
+                       compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+                       reg = <0x8800>;
+                       gpio-controller;
+                       gpio-ranges = <&pmm8650au_1_gpios 0 0 12>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+};

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index b5c9f89b34356bbf8387643e8702a2a5f50b332f..916d4e6da922c138a224858a6b85349fb4b0eff4 100644 (file)
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
 / {
        model = "Qualcomm Technologies, Inc. QCS8300 Ride";
        compatible = "qcom,qcs8300-ride", "qcom,qcs8300";